From: Chunyan Zhang <zhang.chunyan@linaro.org>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Orson Zhai <orsonzhai@gmail.com>,
Baolin Wang <baolin.wang@linaro.org>,
Billows Wu <billows.wu@unisoc.com>,
Jason Wu <jason.wu@unisoc.com>,
Chunyan Zhang <zhang.lyra@gmail.com>
Subject: [PATCH V5 00/10] mmc: add support for sdhci 4.0
Date: Thu, 16 Aug 2018 15:54:14 +0800 [thread overview]
Message-ID: <1534406064-10065-1-git-send-email-zhang.chunyan@linaro.org> (raw)
>From the SD host controller version 4.0 on, SDHCI implementation either
is version 3 compatible or version 4 mode. This patch-set covers those
changes which are common for SDHCI 4.0 version, regardless of whether
they are used with SD or eMMC storage devices.
This patchset also added a new sdhci driver for Spreadtrum's controller
which supports v4.0 mode.
This patchset has been tested on Spreadtrum's mobile phone, emmc can be
initialized, mounted, read and written, with these changes for common
sdhci framework and sdhci-sprd driver.
Changes from V4:
* Addressed Adrian's comments:
- Enable v4 mode in __sdhci_read_caps() and sdhci_init() instead of sdhci_do_reset();
- Move the added member 'v4_mode' to following with other bools;
- Add more comments in the added function sdhci_config_dma();
- Instead of enabling auto-CMD23 in init, enabled it only if receiving sbc from
cards and the argument is suitable for host to deal with;
- Make the addition of the SDHCI_SPEC_4xx defines a separate patch;
- Disable auto-CMD23 if stuff bits is set in the argument of CMD23 in sdhci_request().
* For V4 mode, SDMA also can use auto-CMD23, adjusted host->flags in sdhci_setup_host().
Previous patch series:
v4: https://lkml.org/lkml/2018/7/23/269
v3: https://lkml.org/lkml/2018/7/8/239
v2: https://lkml.org/lkml/2018/6/14/936
v1: https://lkml.org/lkml/2018/6/8/108
Chunyan Zhang (10):
mmc: sdhci: Add version V4 definition
mmc: sdhci: Add sd host v4 mode
mmc: sdhci: Change SDMA address register for v4 mode
mmc: sdhci: Add ADMA2 64-bit addressing support for V4 mode
mmc: sdhci: Add 32-bit block count support for v4 mode
mmc: sdhci: Disable auto-CMD23 if stuff bits is set in CMD23 argument
mmc: sdhci: Add Auto CMD Auto Select support
mmc: sdhci: SDMA may use Auto-CMD23 in v4 mode
mmc: sdhci-sprd: Add Spreadtrum's initial host controller
dt-bindings: sdhci-sprd: Add bindings for the sdhci-sprd controller
.../devicetree/bindings/mmc/sdhci-sprd.txt | 41 ++
drivers/mmc/host/Kconfig | 13 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-sprd.c | 464 +++++++++++++++++++++
drivers/mmc/host/sdhci.c | 251 ++++++++---
drivers/mmc/host/sdhci.h | 22 +-
6 files changed, 741 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
create mode 100644 drivers/mmc/host/sdhci-sprd.c
--
2.7.4
next reply other threads:[~2018-08-16 7:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-16 7:54 Chunyan Zhang [this message]
2018-08-16 7:54 ` [PATCH V5 01/10] mmc: sdhci: Add version V4 definition Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 02/10] mmc: sdhci: Add sd host v4 mode Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 03/10] mmc: sdhci: Change SDMA address register for " Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 04/10] mmc: sdhci: Add ADMA2 64-bit addressing support for V4 mode Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 05/10] mmc: sdhci: Add 32-bit block count support for v4 mode Chunyan Zhang
2018-08-23 12:48 ` Adrian Hunter
2018-08-16 7:54 ` [PATCH V5 06/10] mmc: sdhci: Disable auto-CMD23 if stuff bits is set in CMD23 argument Chunyan Zhang
2018-08-16 8:19 ` Chunyan Zhang
2018-08-23 12:50 ` Adrian Hunter
2018-08-27 10:07 ` Ulf Hansson
2018-08-27 11:07 ` Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 07/10] mmc: sdhci: Add Auto CMD Auto Select support Chunyan Zhang
2018-08-23 12:55 ` Adrian Hunter
2018-08-24 6:52 ` Chunyan Zhang
2018-08-24 6:55 ` Adrian Hunter
2018-08-16 7:54 ` [PATCH V5 08/10] mmc: sdhci: SDMA may use Auto-CMD23 in v4 mode Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 09/10] mmc: sdhci-sprd: Add Spreadtrum's initial host controller Chunyan Zhang
2018-08-16 7:54 ` [PATCH V5 10/10] dt-bindings: sdhci-sprd: Add bindings for the sdhci-sprd controller Chunyan Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534406064-10065-1-git-send-email-zhang.chunyan@linaro.org \
--to=zhang.chunyan@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=baolin.wang@linaro.org \
--cc=billows.wu@unisoc.com \
--cc=jason.wu@unisoc.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).