From: Aapo Vienamo <avienamo@nvidia.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-mmc@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org, Aapo Vienamo <avienamo@nvidia.com>
Subject: [PATCH 2/2] mmc: tegra: Implement periodic pad calibration
Date: Mon, 20 Aug 2018 12:23:33 +0300 [thread overview]
Message-ID: <1534757013-4524-3-git-send-email-avienamo@nvidia.com> (raw)
In-Reply-To: <1534757013-4524-1-git-send-email-avienamo@nvidia.com>
Rerun the pad calibration procedure before sdhci_request() if
the 100 ms recalibration interval has been exceeded.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 94624ec..ef18a0c 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -30,6 +30,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/gpio/consumer.h>
+#include <linux/ktime.h>
#include "sdhci-pltfm.h"
@@ -122,6 +123,7 @@ struct sdhci_tegra {
struct pinctrl_state *pinctrl_state_1v8;
struct sdhci_tegra_autocal_offsets autocal_offsets;
+ ktime_t last_calib;
u32 default_tap;
u32 default_trim;
@@ -533,6 +535,22 @@ static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host)
autocal->pull_down_hs400 = autocal->pull_down_1v8;
}
+static void tegra_sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+ ktime_t since_calib = ktime_sub(ktime_get(), tegra_host->last_calib);
+
+ /* 100 ms calibration interval is specified in the TRM */
+ if (ktime_to_ms(since_calib) > 100) {
+ tegra_sdhci_pad_autocalib(host);
+ tegra_host->last_calib = ktime_get();
+ }
+
+ sdhci_request(mmc, mrq);
+}
+
static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1014,6 +1032,10 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
sdhci_tegra_start_signal_voltage_switch;
}
+ /* Hook to periodically rerun pad calibration */
+ if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
+ host->mmc_host_ops.request = tegra_sdhci_request;
+
host->mmc_host_ops.hs400_enhanced_strobe =
tegra_sdhci_hs400_enhanced_strobe;
--
2.7.4
next prev parent reply other threads:[~2018-08-20 9:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-20 9:23 [PATCH 0/2] Tegra SDHCI rerun pad calibration periodically Aapo Vienamo
2018-08-20 9:23 ` [PATCH 1/2] mmc: sdhci: Export sdhci_request() Aapo Vienamo
2018-08-22 10:54 ` Adrian Hunter
2018-08-27 10:07 ` Ulf Hansson
2018-08-27 10:11 ` Thierry Reding
2018-08-20 9:23 ` Aapo Vienamo [this message]
2018-08-22 10:56 ` [PATCH 2/2] mmc: tegra: Implement periodic pad calibration Adrian Hunter
2018-08-31 14:00 ` Thierry Reding
2018-09-03 6:14 ` Ulf Hansson
2018-08-23 8:50 ` [PATCH 0/2] Tegra SDHCI rerun pad calibration periodically Thierry Reding
2018-08-27 9:55 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534757013-4524-3-git-send-email-avienamo@nvidia.com \
--to=avienamo@nvidia.com \
--cc=adrian.hunter@intel.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).