From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chunyan Zhang Subject: [PATCH V6 9/9] dt-bindings: sdhci-sprd: Add bindings for the sdhci-sprd controller Date: Fri, 24 Aug 2018 17:20:28 +0800 Message-ID: <1535102428-20332-10-git-send-email-zhang.chunyan@linaro.org> References: <1535102428-20332-1-git-send-email-zhang.chunyan@linaro.org> Return-path: In-Reply-To: <1535102428-20332-1-git-send-email-zhang.chunyan@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Ulf Hansson , Adrian Hunter Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, Orson Zhai , Baolin Wang , Billows Wu , Jason Wu , Chunyan Zhang , Chunyan Zhang List-Id: linux-mmc@vger.kernel.org From: Chunyan Zhang This patch adds the device-tree binding documentation for Spreadtrum SDHCI driver. Signed-off-by: Chunyan Zhang --- .../devicetree/bindings/mmc/sdhci-sprd.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sprd.txt diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt new file mode 100644 index 0000000..45c9978 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt @@ -0,0 +1,41 @@ +* Spreadtrum SDHCI controller (sdhci-sprd) + +The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface +for MMC, SD and SDIO types of cards. + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-sprd driver. + +Required properties: +- compatible: Should contain "sprd,sdhci-r11". +- reg: physical base address of the controller and length. +- interrupts: Interrupts used by the SDHCI controller. +- clocks: Should contain phandle for the clock feeding the SDHCI controller +- clock-names: Should contain the following: + "sdio" - SDIO source clock (required) + "enable" - gate clock which used for enabling/disabling the device (required) + +Optional properties: +- assigned-clocks: the same with "sdio" clock +- assigned-clock-parents: the default parent of "sdio" clock + +Examples: + +sdio0: sdio@20600000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x20600000 0 0x1000>; + interrupts = ; + + clock-names = "sdio", "enable"; + clocks = <&ap_clk CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>; + assigned-clocks = <&ap_clk CLK_EMMC_2X>; + assigned-clock-parents = <&rpll CLK_RPLL_390M>; + + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + cap-mmc-hw-reset; + status = "okay"; +}; -- 2.7.4