From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chaotian Jing Subject: Re: [PATCH 2/5] mmc: mtk-sd: don't hard-code interrupt trigger type Date: Thu, 18 Apr 2019 14:36:52 +0800 Message-ID: <1555569412.18628.27.camel@mhfsdcap03> References: <155538933003.25108.3338569916935462285.stgit@noble.brown> <155539004923.25108.12499096383277776864.stgit@noble.brown> <1555402302.18628.17.camel@mhfsdcap03> <878sw97g6r.fsf@notabene.neil.brown.name> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <878sw97g6r.fsf@notabene.neil.brown.name> Sender: linux-kernel-owner@vger.kernel.org To: NeilBrown Cc: Ulf Hansson , linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, thirtythreeforty@gmail.com List-Id: linux-mmc@vger.kernel.org On Wed, 2019-04-17 at 08:12 +1000, NeilBrown wrote: > On Tue, Apr 16 2019, Chaotian Jing wrote: > > > On Tue, 2019-04-16 at 14:47 +1000, NeilBrown wrote: > >> When using devicetree for configuration, interrupt trigger type > >> should be described in the dts file, not hard-coded in the C code. > >> > >> The mtk-sd silicon in the mt7621 soc uses an active-high interrupt > >> and so cannot be used with the current code. > >> > >> So remove the trigger and leave it to be set from devicetree. > >> > >> Signed-off-by: NeilBrown > >> --- > >> drivers/mmc/host/mtk-sd.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > >> index 4492a4465c0e..14e048239143 100644 > >> --- a/drivers/mmc/host/mtk-sd.c > >> +++ b/drivers/mmc/host/mtk-sd.c > >> @@ -2243,7 +2243,7 @@ static int msdc_drv_probe(struct platform_device *pdev) > >> msdc_init_hw(host); > >> > >> ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq, > >> - IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host); > >> + > > change it to IRQF_TRIGGER_NONE | IRQF_ONESHOT > > Why do we need IRQF_ONESHOT. That is for threaded interrupted > handlers... > msdc_irq() clears the interrupts, so ONESHOT isn't needed. > > ??? > > NeilBrown > > I just want to change it to IRQF_TRIGGER_NONE, Since IRQF_TRIGGER_NONE is defined as 0, it's ok to use 0 instead of it. > >> 0, pdev->name, host); > >> if (ret) > >> goto release; > >> > >> > >>