Re: [PATCH V3] ARM: dts: Add dwmmc DT nodes for exynos5420 SOC

[Tomasz Figa <tomasz.figa@gmail.com>]

Hi Yuvaraj,

On Thursday 22 of August 2013 17:21:18 Yuvaraj Kumar C D wrote:
> This patch adds the device tree node entries for exynos5420 SOC.
> Exynos5420 has a different version of DWMMC controller,so a new
> compatible string is used to distinguish it from the prior SOC's.
> 
> changes since V2:
> 	1.dropped num-slots property from node as its not required
> 	  if number of card slots available is 1.
> 
> 	2.Move the below properties
> 		a.fifo-depth
> 		b.card-detect-delay
> 		c.samsung,dw-mshc-ciu-div
> 		d.samsung,dw-mshc-sdr-timing
> 		e.samsung,dw-mshc-ddr-timing
> 	from board dts to SOC dts,as these are not board specific 
properties.
> 
> 	3.Updated the binding document exynos-dw-mshc.txt.
> 
> changes since V1:
> 	1.disable node by status = disabled in SOC file
> 	2.enable node by status = okay in board specific file
> 
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
> ---
>  .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |    4 ++
>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   26 ++++++++++
>  arch/arm/boot/dts/exynos5420.dtsi                  |   51
> ++++++++++++++++++++ 3 files changed, 81 insertions(+)

Please resend this patch with devicetree mailing list and other recipients 
added, as listed in MAINTAINERS file for Documentation/devicetree/ and 
arch/*/boot/dts/ directories.

Best regards,
Tomasz