From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: avorontsov@ru.mvista.com, ben@fluff.org,
benh@kernel.crashing.org, david.vrabel@csr.com,
galak@kernel.crashing.org, linux-mmc@vger.kernel.org,
pierre@ossman.eu, s.hauer@pengutronix.de
Subject: + powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc.patch added to -mm tree
Date: Mon, 17 Aug 2009 16:09:09 -0700 [thread overview]
Message-ID: <200908172309.n7HN9AXB014839@imap1.linux-foundation.org> (raw)
The patch titled
powerpc: introduce and document sdhci,wp-inverted property for eSDHC
has been added to the -mm tree. Its filename is
powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: powerpc: introduce and document sdhci,wp-inverted property for eSDHC
From: Anton Vorontsov <avorontsov@ru.mvista.com>
eSDHC block in MPC837x SOCs reports inverted write-protect state, soon
sdhci-of driver will look for sdhci,wp-inverted properties to decide
whether apply a specific quirk.
So, document the property and add it to device tree source files.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 2 ++
arch/powerpc/boot/dts/mpc8377_mds.dts | 1 +
arch/powerpc/boot/dts/mpc8377_rdb.dts | 1 +
arch/powerpc/boot/dts/mpc8377_wlan.dts | 1 +
arch/powerpc/boot/dts/mpc8378_mds.dts | 1 +
arch/powerpc/boot/dts/mpc8378_rdb.dts | 1 +
arch/powerpc/boot/dts/mpc8379_mds.dts | 1 +
arch/powerpc/boot/dts/mpc8379_rdb.dts | 1 +
8 files changed, 9 insertions(+)
diff -puN Documentation/powerpc/dts-bindings/fsl/esdhc.txt~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc Documentation/powerpc/dts-bindings/fsl/esdhc.txt
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -10,6 +10,8 @@ Required properties:
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
+ - sdhci,wp-inverted : (optional) specifies that eSDHC controller
+ reports inverted write-protect state;
- sdhci,1-bit-only : (optional) specifies that a controller can
only handle 1-bit data transfers.
diff -puN arch/powerpc/boot/dts/mpc8377_mds.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8377_mds.dts
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -159,6 +159,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
diff -puN arch/powerpc/boot/dts/mpc8377_rdb.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8377_rdb.dts
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -173,6 +173,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
diff -puN arch/powerpc/boot/dts/mpc8377_wlan.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8377_wlan.dts
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -150,6 +150,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
clock-frequency = <133333333>;
};
};
diff -puN arch/powerpc/boot/dts/mpc8378_mds.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8378_mds.dts
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -159,6 +159,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
diff -puN arch/powerpc/boot/dts/mpc8378_rdb.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8378_rdb.dts
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -173,6 +173,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
diff -puN arch/powerpc/boot/dts/mpc8379_mds.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8379_mds.dts
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
diff -puN arch/powerpc/boot/dts/mpc8379_rdb.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc arch/powerpc/boot/dts/mpc8379_rdb.dts
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts~powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc
+++ a/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -171,6 +171,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
+ sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
_
Patches currently in -mm which might be from avorontsov@ru.mvista.com are
linux-next.patch
mtd-sst25l-non-jedec-spi-flash-driver.patch
mtd-m25p80-fix-null-pointer-dereference-bug.patch
sdhci-be-more-strict-with-get_min_clock-usage.patch
sdhci-of-fix-sd-clock-calculation.patch
sdhci-of-avoid-writing-reserved-bits-into-host-control-register.patch
sdhci-of-fix-high-speed-cards-recognition.patch
powerpc-introduce-and-document-sdhciwp-inverted-property-for-esdhc.patch
sdhci-of-dont-hard-code-inverted-write-protect-quirk.patch
sdhci-of-cleanup-esdhcs-set_clock-a-little-bit.patch
powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards.patch
spi-add-support-for-device-table-matching.patch
mtd-m25p80-convert-to-device-table-matching.patch
of-remove-stmm25p40-alias.patch
hwmon-adxx-convert-to-device-table-matching.patch
hwmon-lm70-convert-to-device-table-matching.patch
spi-prefix-modalias-with-spi.patch
reply other threads:[~2009-08-17 23:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908172309.n7HN9AXB014839@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=avorontsov@ru.mvista.com \
--cc=ben@fluff.org \
--cc=benh@kernel.crashing.org \
--cc=david.vrabel@csr.com \
--cc=galak@kernel.crashing.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=pierre@ossman.eu \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox