From: Anton Vorontsov <cbouatmailru@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: avorontsov@ru.mvista.com, torvalds@linux-foundation.org,
ben@fluff.org, benh@kernel.crashing.org, david.vrabel@csr.com,
galak@kernel.crashing.org, linux-mmc@vger.kernel.org,
pierre@ossman.eu, s.hauer@pengutronix.de
Subject: Re: [patch 084/232] powerpc/85xx: add eSDHC support for MPC8536DS boards
Date: Wed, 23 Sep 2009 05:16:50 +0400 [thread overview]
Message-ID: <20090923011650.GA26325@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090922175657.ae347784.akpm@linux-foundation.org>
On Tue, Sep 22, 2009 at 05:56:57PM -0700, Andrew Morton wrote:
> On Wed, 23 Sep 2009 04:32:00 +0400 Anton Vorontsov <cbouatmailru@gmail.com> wrote:
>
> > On Tue, Sep 22, 2009 at 04:45:17PM -0700, akpm@linux-foundation.org wrote:
> > > From: Anton Vorontsov <avorontsov@ru.mvista.com>
> > >
> > > This patch simply adds sdhci node to the device tree.
> > >
> > > We specify clock-frequency manually, so that eSDHC will work without
> > > upgrading U-Boot. Though, that'll only work for default setup (1500 MHz)
> > > on new board revisions. For non-default setups, it's recommended to
> > > upgrade U-Boot, since it will fixup clock-frequency automatically.
> > >
> > > Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> > > Cc: Pierre Ossman <pierre@ossman.eu>
> > > Cc: Kumar Gala <galak@kernel.crashing.org>
> > > Cc: David Vrabel <david.vrabel@csr.com>
> > > Cc: Ben Dooks <ben@fluff.org>
> > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > Cc: <linux-mmc@vger.kernel.org>
> > > Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> > > ---
> > >
> > > arch/powerpc/boot/dts/mpc8536ds.dts | 8 ++++++++
> > > 1 file changed, 8 insertions(+)
> > >
> > > diff -puN arch/powerpc/boot/dts/mpc8536ds.dts~powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards arch/powerpc/boot/dts/mpc8536ds.dts
> > > --- a/arch/powerpc/boot/dts/mpc8536ds.dts~powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards
> > > +++ a/arch/powerpc/boot/dts/mpc8536ds.dts
> > > @@ -258,6 +258,14 @@
> > > clock-frequency = <250000000>;
> > > };
> >
> > By "clock-frequency = <250000000>;" above and the one down below*
> > I can see that this patch is already applied (via powerpc tree).
> >
> > Please don't merge this particular patch, it's already there.
> >
> > > + sdhci@2e000 {
> > > + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
> > > + reg = <0x2e000 0x1000>;
> > > + interrupts = <72 0x2>;
> > > + interrupt-parent = <&mpic>;
> > > + clock-frequency = <250000000>;
> >
> > *
> >
> > > + };
> > > +
> > > serial0: serial@4500 {
> > > cell-index = <0>;
> > > device_type = "serial";
> > > _
>
> So someone went and stole [patch 7/7] from your series and didn't tell me?
Kumar told that he applied it to his next tree, you were Cc'ed.
http://lkml.org/lkml/2009/8/25/235
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
prev parent reply other threads:[~2009-09-23 1:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-22 23:45 [patch 084/232] powerpc/85xx: add eSDHC support for MPC8536DS boards akpm
2009-09-23 0:32 ` Anton Vorontsov
2009-09-23 0:56 ` Andrew Morton
2009-09-23 1:16 ` Anton Vorontsov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090923011650.GA26325@oksana.dev.rtsoft.ru \
--to=cbouatmailru@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=avorontsov@ru.mvista.com \
--cc=ben@fluff.org \
--cc=benh@kernel.crashing.org \
--cc=david.vrabel@csr.com \
--cc=galak@kernel.crashing.org \
--cc=linux-mmc@vger.kernel.org \
--cc=pierre@ossman.eu \
--cc=s.hauer@pengutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox