From mboxrd@z Thu Jan 1 00:00:00 1970 From: akpm@linux-foundation.org Subject: [merged] atmel-mci-unified-atmel-mci-drivers-avr32-at91.patch removed from -mm tree Date: Wed, 23 Sep 2009 12:56:02 -0700 Message-ID: <200909231956.n8NJu2k2004035@imap1.linux-foundation.org> Reply-To: linux-kernel@vger.kernel.org Return-path: Sender: mm-commits-owner@vger.kernel.org To: rob@emanuele.us, hskinnemoen@atmel.com, linux-mmc@vger.kernel.org, linux@maxim.org.za, nicolas.ferre@atmel.com, rmk@arm.linux.org.uk, mm-commits@vger.kernel.org List-Id: linux-mmc@vger.kernel.org The patch titled atmel-mci: unified Atmel MCI drivers (AVR32 & AT91) has been removed from the -mm tree. Its filename was atmel-mci-unified-atmel-mci-drivers-avr32-at91.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: atmel-mci: unified Atmel MCI drivers (AVR32 & AT91) From: Rob Emanuele Unification of the atmel-mci driver to support the AT91 processors MCI interface. The atmel-mci driver currently supports the AVR32 and this patch adds AT91 support. Add read/write proof selection switch dependent on chip availability of this feature. To use this new driver on a at91 the platform driver for your board needs to be updated. [nicolas.ferre@atmel.com indent, Kconfig comment and one printk modification] Signed-off-by: Rob Emanuele Signed-off-by: Nicolas Ferre Cc: Haavard Skinnemoen Cc: Andrew Victor Cc: Russell King Cc: Signed-off-by: Andrew Morton --- drivers/mmc/host/Kconfig | 16 ++++++++++++---- drivers/mmc/host/atmel-mci.c | 33 ++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 7 deletions(-) diff -puN drivers/mmc/host/Kconfig~atmel-mci-unified-atmel-mci-drivers-avr32-at91 drivers/mmc/host/Kconfig --- a/drivers/mmc/host/Kconfig~atmel-mci-unified-atmel-mci-drivers-avr32-at91 +++ a/drivers/mmc/host/Kconfig @@ -160,6 +160,12 @@ config MMC_AU1X If unsure, say N. +choice + prompt "Atmel SD/MMC Driver" + default MMC_ATMELMCI if AVR32 + help + Choose which driver to use for the Atmel MCI Silicon + config MMC_AT91 tristate "AT91 SD/MMC Card Interface support" depends on ARCH_AT91 @@ -170,17 +176,19 @@ config MMC_AT91 config MMC_ATMELMCI tristate "Atmel Multimedia Card Interface support" - depends on AVR32 + depends on AVR32 || ARCH_AT91 help This selects the Atmel Multimedia Card Interface driver. If - you have an AT32 (AVR32) platform with a Multimedia Card - slot, say Y or M here. + you have an AT32 (AVR32) or AT91 platform with a Multimedia + Card slot, say Y or M here. If unsure, say N. +endchoice + config MMC_ATMELMCI_DMA bool "Atmel MCI DMA support (EXPERIMENTAL)" - depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL + depends on MMC_ATMELMCI && AVR32 && DMA_ENGINE && EXPERIMENTAL help Say Y here to have the Atmel MCI driver use a DMA engine to do data transfers and thus increase the throughput and diff -puN drivers/mmc/host/atmel-mci.c~atmel-mci-unified-atmel-mci-drivers-avr32-at91 drivers/mmc/host/atmel-mci.c --- a/drivers/mmc/host/atmel-mci.c~atmel-mci-unified-atmel-mci-drivers-avr32-at91 +++ a/drivers/mmc/host/atmel-mci.c @@ -30,6 +30,7 @@ #include #include +#include #include #include "atmel-mci-regs.h" @@ -210,6 +211,18 @@ struct atmel_mci_slot { set_bit(event, &host->pending_events) /* + * Enable or disable features/registers based on + * whether the processor supports them + */ +static bool mci_has_rwproof(void) +{ + if (cpu_is_at91sam9261() || cpu_is_at91rm9200()) + return false; + else + return true; +} + +/* * The debugfs stuff below is mostly optimized away when * CONFIG_DEBUG_FS is not set. */ @@ -276,8 +289,13 @@ static void atmci_show_status_reg(struct [3] = "BLKE", [4] = "DTIP", [5] = "NOTBUSY", + [6] = "ENDRX", + [7] = "ENDTX", [8] = "SDIOIRQA", [9] = "SDIOIRQB", + [12] = "SDIOWAIT", + [14] = "RXBUFF", + [15] = "TXBUFE", [16] = "RINDE", [17] = "RDIRE", [18] = "RCRCE", @@ -285,6 +303,11 @@ static void atmci_show_status_reg(struct [20] = "RTOE", [21] = "DCRCE", [22] = "DTOE", + [23] = "CSTOE", + [24] = "BLKOVRE", + [25] = "DMADONE", + [26] = "FIFOEMPTY", + [27] = "XFRDONE", [30] = "OVRE", [31] = "UNRE", }; @@ -849,13 +872,15 @@ static void atmci_set_ios(struct mmc_hos clkdiv = 255; } + host->mode_reg = MCI_MR_CLKDIV(clkdiv); + /* * WRPROOF and RDPROOF prevent overruns/underruns by * stopping the clock when the FIFO is full/empty. * This state is not expected to last for long. */ - host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF - | MCI_MR_RDPROOF; + if (mci_has_rwproof()) + host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF); if (list_empty(&host->queue)) mci_writel(host, MR, host->mode_reg); @@ -1648,8 +1673,10 @@ static int __init atmci_probe(struct pla nr_slots++; } - if (!nr_slots) + if (!nr_slots) { + dev_err(&pdev->dev, "init failed: no slot defined\n"); goto err_init_slot; + } dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", _ Patches currently in -mm which might be from rob@emanuele.us are origin.patch