From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: ben@simtec.co.uk, linux-mmc@vger.kernel.org
Subject: + s3cmci-change-gpio-to-gpiolib-from-s3c24xx-specific-calls.patch added to -mm tree
Date: Tue, 29 Sep 2009 15:57:07 -0700 [thread overview]
Message-ID: <200909292257.n8TMv7jd025596@imap1.linux-foundation.org> (raw)
The patch titled
s3cmci: change GPIO to gpiolib from S3C24XX specific calls
has been added to the -mm tree. Its filename is
s3cmci-change-gpio-to-gpiolib-from-s3c24xx-specific-calls.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: s3cmci: change GPIO to gpiolib from S3C24XX specific calls
From: Ben Dooks <ben@simtec.co.uk>
Move to using gpiolib to access the card detect and write protect GPIO
lines instead of using the platform speicifc s3c2410_gpio calls.
Also ensure that the card lines are claimed the same way to avoid overlap
with any other drivers.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/mmc/host/s3cmci.c | 87 ++++++++++++++++++++++++++++--------
1 file changed, 69 insertions(+), 18 deletions(-)
diff -puN drivers/mmc/host/s3cmci.c~s3cmci-change-gpio-to-gpiolib-from-s3c24xx-specific-calls drivers/mmc/host/s3cmci.c
--- a/drivers/mmc/host/s3cmci.c~s3cmci-change-gpio-to-gpiolib-from-s3c24xx-specific-calls
+++ a/drivers/mmc/host/s3cmci.c
@@ -1047,7 +1047,7 @@ static int s3cmci_card_present(struct mm
if (pdata->gpio_detect == 0)
return -ENOSYS;
- ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
+ ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
return ret ^ pdata->detect_invert;
}
@@ -1102,12 +1102,12 @@ static void s3cmci_set_ios(struct mmc_ho
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
- s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
- s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
- s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
- s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
- s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
if (host->pdata->set_power)
host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1119,8 +1119,7 @@ static void s3cmci_set_ios(struct mmc_ho
case MMC_POWER_OFF:
default:
- s3c2410_gpio_setpin(S3C2410_GPE5, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
+ gpio_direction_output(S3C2410_GPE(5), 0);
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
@@ -1244,12 +1243,14 @@ static inline void s3cmci_cpufreq_deregi
}
#endif
+
static int __devinit s3cmci_probe(struct platform_device *pdev)
{
struct s3cmci_host *host;
struct mmc_host *mmc;
int ret;
int is2440;
+ int i;
is2440 = platform_get_device_id(pdev)->driver_data;
@@ -1259,6 +1260,18 @@ static int __devinit s3cmci_probe(struct
goto probe_out;
}
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
+ ret = gpio_request(i, dev_name(&pdev->dev));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+
+ for (i--; i >= S3C2410_GPE(5); i--)
+ gpio_free(i);
+
+ goto probe_free_host;
+ }
+ }
+
host = mmc_priv(mmc);
host->mmc = mmc;
host->pdev = pdev;
@@ -1295,7 +1308,7 @@ static int __devinit s3cmci_probe(struct
"failed to get io memory region resouce.\n");
ret = -ENOENT;
- goto probe_free_host;
+ goto probe_free_gpio;
}
host->mem = request_mem_region(host->mem->start,
@@ -1304,7 +1317,7 @@ static int __devinit s3cmci_probe(struct
if (!host->mem) {
dev_err(&pdev->dev, "failed to request io memory region.\n");
ret = -ENOENT;
- goto probe_free_host;
+ goto probe_free_gpio;
}
host->base = ioremap(host->mem->start, resource_size(host->mem));
@@ -1333,6 +1346,14 @@ static int __devinit s3cmci_probe(struct
disable_irq(host->irq);
+ if (host->pdata->gpio_detect) {
+ ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get detect gpio\n");
+ goto probe_free_irq;
+ }
+ }
+
host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
if (host->irq_cd >= 0) {
@@ -1341,22 +1362,27 @@ static int __devinit s3cmci_probe(struct
DRIVER_NAME, host)) {
dev_err(&pdev->dev, "can't get card detect irq.\n");
ret = -ENOENT;
- goto probe_free_irq;
+ goto probe_free_gpio_cd;
}
} else {
dev_warn(&pdev->dev, "host detect has no irq available\n");
- s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
- S3C2410_GPIO_INPUT);
+ gpio_direction_input(host->pdata->gpio_detect);
}
- if (host->pdata->gpio_wprotect)
- s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
- S3C2410_GPIO_INPUT);
+ if (host->pdata->gpio_wprotect) {
+ ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get writeprotect\n");
+ goto probe_free_irq_cd;
+ }
+
+ gpio_direction_input(host->pdata->gpio_wprotect);
+ }
if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
dev_err(&pdev->dev, "unable to get DMA channel.\n");
ret = -EBUSY;
- goto probe_free_irq_cd;
+ goto probe_free_gpio_wp;
}
host->clk = clk_get(&pdev->dev, "sdi");
@@ -1423,6 +1449,14 @@ static int __devinit s3cmci_probe(struct
clk_free:
clk_put(host->clk);
+ probe_free_gpio_wp:
+ if (host->pdata->gpio_wprotect)
+ gpio_free(host->pdata->gpio_wprotect);
+
+ probe_free_gpio_cd:
+ if (host->pdata->gpio_detect)
+ gpio_free(host->pdata->gpio_detect);
+
probe_free_irq_cd:
if (host->irq_cd >= 0)
free_irq(host->irq_cd, host);
@@ -1436,8 +1470,13 @@ static int __devinit s3cmci_probe(struct
probe_free_mem_region:
release_mem_region(host->mem->start, resource_size(host->mem));
+ probe_free_gpio:
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+ gpio_free(i);
+
probe_free_host:
mmc_free_host(mmc);
+
probe_out:
return ret;
}
@@ -1459,6 +1498,8 @@ static int __devexit s3cmci_remove(struc
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
+ struct s3c24xx_mci_pdata *pd = host->pdata;
+ int i;
s3cmci_shutdown(pdev);
@@ -1469,6 +1510,16 @@ static int __devexit s3cmci_remove(struc
free_irq(host->irq, host);
+ if (pd->gpio_wprotect)
+ gpio_free(pd->gpio_wprotect);
+
+ if (pd->gpio_detect)
+ gpio_free(pd->gpio_detect);
+
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+ gpio_free(i);
+
+
iounmap(host->base);
release_mem_region(host->mem->start, resource_size(host->mem));
_
Patches currently in -mm which might be from ben@simtec.co.uk are
linux-next.patch
s3cmci-use-resource_size-instead-of-local-macro.patch
s3cmci-update-probe-to-use-new-platform-id-list.patch
s3cmci-change-gpio-to-gpiolib-from-s3c24xx-specific-calls.patch
s3cmci-change-to-use-dev_pm_ops.patch
s3cmci-fix-direct-write-to-interrupt-mask.patch
s3cmci-add-debugfs-support-for-examining-driver-and-hardware-state.patch
s3cmci-add-sdio-irq-support.patch
s3cmci-kconfig-selection-for-pio-dma-both.patch
s3cmci-dma-fixes.patch
s3cmci-make-sdio-irq-hardware-irq-support-build-time-configurable.patch
s3cmci-add-better-support-for-no-card-detect-or-write-protect-available.patch
gpiolib-add-names-file-in-gpio-chip-sysfs.patch
reply other threads:[~2009-09-29 22:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909292257.n8TMv7jd025596@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=ben@simtec.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox