[PATCH V2 5/10] omap: Add functions for dynamic remuxing of pins

[Adrian Hunter <adrian.hunter@nokia.com>]

>From 33beb5bc36cba739971dc8919a6929925ad3dafc Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 13 Jan 2010 10:27:17 -0800
Subject: [PATCH] omap: Add functions for dynamic remuxing of pins

Make the omap_mux_read and write available for board code,
and rename omap_mux_set_board_signals into omap_mux_write_array.

In some cases we want to change the signals dynamically,
mostly for power management.

Note that we cannot use the signal names as they are set
__init to save memory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mux.c |   22 +++++++++++-----------
 arch/arm/mach-omap2/mux.h |   24 ++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index a8febd3..50298b4 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -51,7 +51,7 @@ struct omap_mux_entry {
 static unsigned long mux_phys;
 static void __iomem *mux_base;
 
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
 {
 	if (cpu_is_omap24xx())
 		return __raw_readb(mux_base + reg);
@@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg)
 		return __raw_readw(mux_base + reg);
 }
 
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
 {
 	if (cpu_is_omap24xx())
 		__raw_writeb(val, mux_base + reg);
@@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg)
 		__raw_writew(val, mux_base + reg);
 }
 
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		omap_mux_write(board_mux->value, board_mux->reg_offset);
+		board_mux++;
+	}
+}
+
 #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
@@ -833,14 +841,6 @@ static void __init omap_mux_set_cmdline_signals(void)
 	kfree(options);
 }
 
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
-	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		omap_mux_write(board_mux->value, board_mux->reg_offset);
-		board_mux++;
-	}
-}
-
 static int __init omap_mux_copy_names(struct omap_mux *src,
 					struct omap_mux *dst)
 {
@@ -992,7 +992,7 @@ static void omap_mux_init_package(struct omap_mux *superset,
 static void omap_mux_init_signals(struct omap_board_mux *board_mux)
 {
 	omap_mux_set_cmdline_signals();
-	omap_mux_set_board_signals(board_mux);
+	omap_mux_write_array(board_mux);
 }
 
 #else
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index d8b4d5a..f8c2e7a 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -147,6 +147,30 @@ u16 omap_mux_get_gpio(int gpio);
 void omap_mux_set_gpio(u16 val, int gpio);
 
 /**
+ * omap_mux_read() - read mux register
+ * @mux_offset:		Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val:		New mux register value
+ * @mux_offset:		Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
+/**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:		Board specific mux table
  * @flags:		OMAP package type used for the board
-- 
1.6.0.4