public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux@fluff.org>
To: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-mmc@vger.kernel.org, ben-linux@fluff.org, kgene.kim@samsung.com
Subject: Re: [PATCH-Resend] sdhci: Add new quirk in sdhci driver and update ADMA descriptor build.
Date: Thu, 28 Jan 2010 04:13:17 +0000	[thread overview]
Message-ID: <20100128041317.GP10014@trinity.fluff.org> (raw)
In-Reply-To: <1264643422-6286-1-git-send-email-thomas.ab@samsung.com>

On Thu, Jan 28, 2010 at 10:50:22AM +0900, Thomas Abraham wrote:
> The s3c6410 sdhci controller does not support the 'End' attribute and
> NOP attribute in the same 8-Byte ADMA descriptor. This patch adds a
> new quirk to identify sdhci host contollers with such behaviour.
> In addition to this, for controllers using the new quirk, the last
> entry in the ADMA descritor table is marked with the 'End' attribute
> (instead of using a NOP descriptor with 'End' attribute).
> 
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
> ---
>  drivers/mmc/host/sdhci.c |   35 ++++++++++++++++++++++-------------
>  drivers/mmc/host/sdhci.h |    2 ++
>  2 files changed, 24 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index c279fbc..8be2613 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -487,19 +487,28 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
>  		WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
>  	}
>  
> -	/*
> -	 * Add a terminating entry.
> -	 */
> -	desc[7] = 0;
> -	desc[6] = 0;
> -	desc[5] = 0;
> -	desc[4] = 0;
> -
> -	desc[3] = 0;
> -	desc[2] = 0;
> -
> -	desc[1] = 0x00;
> -	desc[0] = 0x03; /* nop, end, valid */
> +	if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
> +		/*
> +		* Mark the last descriptor as the terminating descriptor
> +		*/
> +		if (desc != host->adma_desc) {
> +			desc -= 8;
> +			desc[0] |= 0x2; /* end */
> +		}
> +	} else {
> +		/*
> +		* Add a terminating entry.
> +		*/
> +		desc[7] = 0;
> +		desc[6] = 0;
> +		desc[5] = 0;
> +		desc[4] = 0;
> +
> +		desc[3] = 0;
> +		desc[2] = 0;
> +		desc[1] = 0x00;
> +		desc[0] = 0x03; /* nop, end, valid */
> +	}
>  
>  	/*
>  	 * Resync align buffer as we might have changed it.
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 842f46f..7ba0006 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -236,6 +236,8 @@ struct sdhci_host {
>  #define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
>  /* Controller uses SDCLK instead of TMCLK for data timeouts */
>  #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
> +/* Controller cannot support End Attribute in NOP ADMA descriptor */
> +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<25)
>  
>  	int			irq;		/* Device IRQ */
>  	void __iomem *		ioaddr;		/* Mapped address */
> -- 
> 1.6.3.3
> 

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.


      reply	other threads:[~2010-01-28  4:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-28  1:50 [PATCH-Resend] sdhci: Add new quirk in sdhci driver and update ADMA descriptor build Thomas Abraham
2010-01-28  4:13 ` Ben Dooks [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100128041317.GP10014@trinity.fluff.org \
    --to=ben-linux@fluff.org \
    --cc=kgene.kim@samsung.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=thomas.ab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox