* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] [not found] ` <201004262048.o3QKml95025961@demeter.kernel.org> @ 2010-04-26 20:58 ` Andrew Morton 2010-04-27 10:59 ` Stephan Suerken 2010-04-30 17:06 ` Andi Kleen 0 siblings, 2 replies; 9+ messages in thread From: Andrew Morton @ 2010-04-26 20:58 UTC (permalink / raw) To: linux-mmc; +Cc: bugzilla-daemon, Stephan Sürken, Andi Kleen (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Mon, 26 Apr 2010 20:48:47 GMT bugzilla-daemon@bugzilla.kernel.org wrote: > https://bugzilla.kernel.org/show_bug.cgi?id=15836 > OK, I give up. Can anyone suggest how 6ad696d2cf535772dff659298ec7e7260e344595 ("mm: allow memory hotplug and hibernation in the same kernel") could have caused the mmc failures which Stephan is reporting in the above bugzilla record? Thanks. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] 2010-04-26 20:58 ` [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] Andrew Morton @ 2010-04-27 10:59 ` Stephan Suerken 2010-04-28 22:41 ` Matt Fleming 2010-04-30 17:06 ` Andi Kleen 1 sibling, 1 reply; 9+ messages in thread From: Stephan Suerken @ 2010-04-27 10:59 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-mmc, bugzilla-daemon, Andi Kleen [-- Attachment #1: Type: text/plain, Size: 452 bytes --] On Mon, 2010-04-26 at 13:58 -0700, Andrew Morton wrote: (...) > > https://bugzilla.kernel.org/show_bug.cgi?id=15836 > > > > OK, I give up. Ok, I guess it would be very helpful, first of all, if someone could affirm the buggy behavior on the same or similar hardware with kernels >=2.6.32. The bug occurs on a "HP HDX 16" laptop; attaching some hardware information... Thanks! Stephan -- Stephan Sürken <absurd at olurdix.de> [-- Attachment #2: lspci_vvnn.txt --] [-- Type: text/plain, Size: 39726 bytes --] 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: d0000000-d2ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Hewlett-Packard Company Device [103c:361b] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise- Slot # 1, PowerLimit 75.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [140] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 80e0 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 80c0 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at dd005c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at dd000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: dc000000-dcffffff Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 0, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:361b] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: db000000-dbffffff Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 1, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4179 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:361b] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: da000000-daffffff Prefetchable memory behind bridge: 00000000d5000000-00000000d5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4181 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:361b] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d9000000-d9ffffff Prefetchable memory behind bridge: 00000000d6000000-00000000d6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 4, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4189 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:361b] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=09, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d8000000-d8ffffff Prefetchable memory behind bridge: 00000000d7000000-00000000d7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 5, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4191 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:361b] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 80a0 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 8080 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 8060 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 8040 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at dd005800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:361b] 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 31 Region 0: I/O ports at 8108 [size=8] Region 1: I/O ports at 8114 [size=4] Region 2: I/O ports at 8100 [size=8] Region 3: I/O ports at 8110 [size=4] Region 4: I/O ports at 8020 [size=32] Region 5: Memory at dd005000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+ Address: fee0300c Data: 41b9 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at dd006000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 8000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 11 Region 0: Memory at dd004000 (64-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 9600M GT [10de:0649] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 7000 [size=128] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 41d1 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia 02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation Device [8086:1211] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 41c1 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Device Serial Number ba-8c-4f-ff-ff-6b-21-00 Kernel driver in use: iwlagn Kernel modules: iwlagn 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: I/O ports at 5000 [size=256] Region 2: Memory at d4010000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d4000000 (64-bit, prefetchable) [size=64K] Expansion ROM at d4020000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 41a9 Capabilities: [70] Express (v1) Endpoint, MSI 01 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2 Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: r8169 Kernel modules: r8169 06:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technologies, Inc. Device [197b:2380] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d9000000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d9000d00 (32-bit, non-prefetchable) [size=128] Region 4: Memory at d9000c80 (32-bit, non-prefetchable) [size=128] Region 5: Memory at d9000c00 (32-bit, non-prefetchable) [size=128] Capabilities: [44] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [94] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fffffffc Data: 0000 Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.1 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2382] Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d9000b00 (32-bit, non-prefetchable) [size=256] Capabilities: [a4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [94] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fffffffc Data: 0000 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 06:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Device [197b:2381] (prog-if 01) Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at d9000a00 (32-bit, non-prefetchable) [size=256] Capabilities: [a4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [94] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fffffffc Data: 0000 Kernel modules: sdhci-pci 06:00.3 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2383] Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d9000900 (32-bit, non-prefetchable) [size=256] Capabilities: [a4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [94] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fffffffc Data: 0000 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms 06:00.4 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2384] Subsystem: Hewlett-Packard Company Device [103c:361b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d9000800 (32-bit, non-prefetchable) [size=256] Capabilities: [a4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [94] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fffffffc Data: 0000 [-- Attachment #3: dmidecode.txt --] [-- Type: text/plain, Size: 8979 bytes --] # dmidecode 2.9 SMBIOS 2.4 present. 25 structures occupying 1075 bytes. Table at 0x000E5380. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Hewlett-Packard Version: F.32 Release Date: 10/26/2009 ROM Size: 1024 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported Targeted content distribution is supported BIOS Revision: 15.49 Firmware Revision: 21.45 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: HP HDX 16 Notebook PC Version: Rev 1 Serial Number: CNF9011D4M UUID: 434E4639-3031-3144-344D-00238B5D95A4 Wake-up Type: Power Switch SKU Number: FT215EA#ABD Family: 103C_5335KV Handle 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Quanta Product Name: 361B Version: 15.2D Serial Number: CNF9011D4M Asset Tag: Base Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Base Board Chassis Location Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 22 bytes Chassis Information Manufacturer: Quanta Type: Notebook Lock: Not Present Version: N/A Serial Number: None Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x0000020F Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 Handle 0x0004, DMI type 9, 13 bytes System Slot Information Designation: PCI Express Graphic X16 Type: x16 PCI Express Current Usage: Available Length: Other ID: 0 Characteristics: PME signal is supported Hot-plug devices are supported Handle 0x0005, DMI type 9, 13 bytes System Slot Information Designation: PCI Express-0 Type: x1 PCI Express Current Usage: Available Length: Other ID: 0 Characteristics: PME signal is supported Hot-plug devices are supported Handle 0x0006, DMI type 9, 13 bytes System Slot Information Designation: PCI Express-1 Type: x1 PCI Express Current Usage: Available Length: Other ID: 1 Characteristics: PME signal is supported Hot-plug devices are supported Handle 0x0007, DMI type 9, 13 bytes System Slot Information Designation: PCI Express-2 Type: x1 PCI Express Current Usage: Available Length: Other ID: 2 Characteristics: PME signal is supported Hot-plug devices are supported Handle 0x0008, DMI type 9, 13 bytes System Slot Information Designation: PCI Express-3 Type: x1 PCI Express Current Usage: Available Length: Other ID: 3 Characteristics: PME signal is supported Hot-plug devices are supported Handle 0x0009, DMI type 9, 13 bytes System Slot Information Designation: PCI Express-4 Type: x1 PCI Express Current Usage: Available Length: Other ID: 4 Characteristics: PME signal is supported Hot-plug devices are supported Handle 0x000A, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: Handle 0x000B, DMI type 11, 5 bytes OEM Strings String 1: $HP$ String 2: LOC#ABD String 3: ABS 70/71 79 7A 7B 7C String 4: CNB1 01110000140F20001 Handle 0x000C, DMI type 15, 29 bytes System Event Log Area Length: 32672 bytes Header Start Offset: 0x0000 Data Start Offset: 0x0000 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x12345678 Header Format: OEM-specific Supported Log Type Descriptors: 3 Descriptor 1: POST memory resize Data Format 1: None Descriptor 2: POST error Data Format 2: POST results bitmap Descriptor 3: Log area reset/cleared Data Format 3: None Handle 0x000D, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x000E, DMI type 4, 35 bytes Processor Information Socket Designation: CPU Type: Central Processor Family: Pentium M Manufacturer: Intel(R) Corporation ID: 7A 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 23, Stepping 10 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz Voltage: 1.6 V External Clock: 1066 MHz Max Speed: 2533 MHz Current Speed: 2533 MHz Status: Populated, Enabled Upgrade: <OUT OF SPEC> L1 Cache Handle: 0x0011 L2 Cache Handle: 0x000F L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: FFFF Part Number: Not Specified Handle 0x000F, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 3072 KB Maximum Size: 3072 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: <OUT OF SPEC> Handle 0x0010, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative Handle 0x0011, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0012, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0013, DMI type 17, 27 bytes Memory Device Array Handle: 0x0012 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: DIMM0 Bank Locator: BANK 0 Type: DDR2 Type Detail: Synchronous Speed: 800 MHz (1.2 ns) Manufacturer: 7F7FFE0000000000 Serial Number: 5A0749B5 Asset Tag: Unknown Part Number: EBE21UE8ACUA-8G-E Handle 0x0014, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0013 Memory Array Mapped Address Handle: 0x0017 Partition Row Position: 2 Interleave Position: 1 Interleaved Data Depth: 1 Handle 0x0015, DMI type 17, 27 bytes Memory Device Array Handle: 0x0012 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: DIMM2 Bank Locator: BANK 2 Type: DDR2 Type Detail: Synchronous Speed: 800 MHz (1.2 ns) Manufacturer: 7F7FFE0000000000 Serial Number: 5A0749B3 Asset Tag: Unknown Part Number: EBE21UE8ACUA-8G-E Handle 0x0016, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x0015 Memory Array Mapped Address Handle: 0x0017 Partition Row Position: 2 Interleave Position: 2 Interleaved Data Depth: 1 Handle 0x0017, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x0012 Partition Width: 0 Handle 0x0018, DMI type 127, 4 bytes End Of Table ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] 2010-04-27 10:59 ` Stephan Suerken @ 2010-04-28 22:41 ` Matt Fleming 0 siblings, 0 replies; 9+ messages in thread From: Matt Fleming @ 2010-04-28 22:41 UTC (permalink / raw) To: Stephan Suerken; +Cc: linux-mmc, bugzilla-daemon, Andi Kleen, Andrew Morton On Tue, 27 Apr 2010 12:59:17 +0200, Stephan Suerken <absurd@olurdix.de> wrote: > On Mon, 2010-04-26 at 13:58 -0700, Andrew Morton wrote: > (...) > > > https://bugzilla.kernel.org/show_bug.cgi?id=15836 > > > > > > > OK, I give up. > > Ok, I guess it would be very helpful, first of all, if someone could > affirm the buggy behavior on the same or similar hardware with kernels > >=2.6.32. > > The bug occurs on a "HP HDX 16" laptop; attaching some hardware > information... Stephan, this one definitely looks strange. Have you tried running other diagnostic tools on you SD card, e.g. fsck? How about on your hard disks or other mass storage devices? Is it always the same block that's reported as bad? Were you doing any suspend/hibernation during these tests? It might also be an idea to turn on CONFIG_DEBUG_PAGEALLOC and run badblocks again. If you turn off CONFIG_HOTPLUG and CONFIG_HIBERNATION on a recent kernel does it work then? I'm pretty stumped as to what is going on here... ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] 2010-04-26 20:58 ` [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] Andrew Morton 2010-04-27 10:59 ` Stephan Suerken @ 2010-04-30 17:06 ` Andi Kleen 2010-05-01 18:47 ` Stephan Sürken 1 sibling, 1 reply; 9+ messages in thread From: Andi Kleen @ 2010-04-30 17:06 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-mmc, bugzilla-daemon, Stephan Sürken > Can anyone suggest how 6ad696d2cf535772dff659298ec7e7260e344595 ("mm: > allow memory hotplug and hibernation in the same kernel") could have > caused the mmc failures which Stephan is reporting in the above > bugzilla record? The mission information is which CONFIG_* option changes the behaviour. (or maybe it's in the bugzilla, i just skimmed it very quickly) presumably it's either hibernation or memory hotadd that introduces the problem. My patch just allowed to have both together. Once it's determined which one it is one could do a second bisect with that option always on (and the other off)? Or maybe it's not a regression. -Andi ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] 2010-04-30 17:06 ` Andi Kleen @ 2010-05-01 18:47 ` Stephan Sürken 2010-05-01 23:04 ` Andi Kleen 0 siblings, 1 reply; 9+ messages in thread From: Stephan Sürken @ 2010-05-01 18:47 UTC (permalink / raw) To: Andi Kleen; +Cc: Andrew Morton, linux-mmc, bugzilla-daemon On Fri, 2010-04-30 at 19:06 +0200, Andi Kleen wrote: > The mission information is which CONFIG_* option changes the behaviour. > (or maybe it's in the bugzilla, i just skimmed it very quickly) > > presumably it's either hibernation or memory hotadd that introduces > the problem. > > My patch just allowed to have both together. > > Once it's determined which one it is one could do a second bisect > with that option always on (and the other off)? Or maybe it's not a > regression. Thx Andi. I now get the obvious: the way I built the kernels (using standard Debian configs as template, having both CONFIG_MEMORY_HOTPLUG and CONIG_HIBERNATION enabled), without your commit, CONFIG_MEMORY_HOTPLUG was implicitly turned off. Bummer. Enabling CONFIG_MEMORY_HOTPLUG actually enables the bug. I explicitly confirmed this on top of 2.6.33.2: config-2.6.33.2.git19f00f0-config-2.6.33-2-amd64.nohiber:CONFIG_MEMORY_HOTPLUG=y =>"bad" config-2.6.33.2.git19f00f0-config-2.6.33-2-amd64.nohotplug:# CONFIG_MEMORY_HOTPLUG is not set =>"good" So any code enabled by CONFIG_MEMORY_HOTPLUG is the winner, presumable somewhere in the mmc code (?). I am not sure how to proceed, now. To bisect I would need to guess/find a "good" kernel first, if there is one. Maybe some hints how to best debug the code in question would be more helpful... Thx, Stephan -- Stephan Sürken <absurd at olurdix.de> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] 2010-05-01 18:47 ` Stephan Sürken @ 2010-05-01 23:04 ` Andi Kleen [not found] ` <1272912441.7490.6.camel@weslok.olx.intra> 0 siblings, 1 reply; 9+ messages in thread From: Andi Kleen @ 2010-05-01 23:04 UTC (permalink / raw) To: Stephan Sürken; +Cc: Andrew Morton, linux-mmc, bugzilla-daemon > I explicitly confirmed this on top of 2.6.33.2: Thanks that makes a bit more sense. > > config-2.6.33.2.git19f00f0-config-2.6.33-2-amd64.nohiber:CONFIG_MEMORY_HOTPLUG=y > =>"bad" > config-2.6.33.2.git19f00f0-config-2.6.33-2-amd64.nohotplug:# CONFIG_MEMORY_HOTPLUG is not set > =>"good" > > So any code enabled by CONFIG_MEMORY_HOTPLUG is the winner, presumable > somewhere in the mmc code (?). I doubt the mmc code really knows anything about memory hotplug. Must be some subtle side effect. Can send the diff of two boot logs with memory hotplug on and off? I wonder if you have the same memory layout in both cases. -Andi ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <1272912441.7490.6.camel@weslok.olx.intra>]
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] [not found] ` <1272912441.7490.6.camel@weslok.olx.intra> @ 2010-05-04 20:13 ` Andi Kleen 2010-07-20 19:53 ` Stephan Sürken 0 siblings, 1 reply; 9+ messages in thread From: Andi Kleen @ 2010-05-04 20:13 UTC (permalink / raw) To: Stephan Sürken; +Cc: Andi Kleen, Andrew Morton, linux-mmc, bugzilla-daemon On Mon, May 03, 2010 at 08:47:21PM +0200, Stephan Sürken wrote: > On Sun, 2010-05-02 at 01:04 +0200, Andi Kleen wrote: > (..) > > > config-2.6.33.2.git19f00f0-config-2.6.33-2-amd64.nohiber:CONFIG_MEMORY_HOTPLUG=y > > > =>"bad" > > > config-2.6.33.2.git19f00f0-config-2.6.33-2-amd64.nohotplug:# CONFIG_MEMORY_HOTPLUG is not set > > > =>"good" > (..) > > Can send the diff of two boot logs with memory hotplug on and off? > > I wonder if you have the same memory layout in both cases. > > Attached, from the above two good/bad kernel builds; I stripped the > stamps to make it more readable. Thanks, I was hoping for a comparison between memory hotplug on and off with hibernation always off, this seems to be between memory hotplug and hibernation. Anyways looking at this log. The only significant difference I can see is that in the one case a lot of stuff including sdhci get initialized earlier. Presumably the timing is somewhat different related to the USB scanning and the memory hotadd kernel being a bit slower to boot (perhaps due to the increased printks) Perhaps this exposes some races that cause the problem. What these races are I don't know. I would suggest to check with the mmc maintainer. -Andi ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] 2010-05-04 20:13 ` Andi Kleen @ 2010-07-20 19:53 ` Stephan Sürken 0 siblings, 0 replies; 9+ messages in thread From: Stephan Sürken @ 2010-07-20 19:53 UTC (permalink / raw) To: Andi Kleen; +Cc: Andrew Morton, linux-mmc, bugzilla-daemon [-- Attachment #1: Type: text/plain, Size: 2238 bytes --] Hi, sorry for the delay, but I am still on it ;) On Tue, 2010-05-04 at 22:13 +0200, Andi Kleen wrote: > I would suggest to check with the mmc maintainer. linux-mmc is on CC, I hope that will suffice. Ok, I spent some more time trying to debug this, but the only really predictable thing seems to be that it's designed to drive me mad ;). 1st, it's definitely not just some code enabled by CONFIG_MEMORY_HOTPLUG. I did a new bisect as suggested by Andi earlier (using a configuration with CONFIG_HIBERNATION off and CONFIG_MEMORY_HOTPLUG on); the result however was unusable as I had to change some other config in-between. So, yes, disabling CONFIG_MEMORY_HOTPLUG seemingly consistent "fixes" the bug, at least for kernels 2.6.30-33 using a else unchanged Debian config. But just changing other config items (like just leaving out some "unrelated" modules) also does the trick... > get initialized earlier. Presumably the timing is somewhat > different related to the USB scanning and the memory hotadd > kernel being a bit slower to boot (perhaps due to the increased printks) Then (assuming a strange race condition) I checked that 2.6.34 (I couldn't until then build a "non-bad" 2.6.34 kernel) behaves the same; and yes, after removing some more unrelated modules, it suddenly works. So I did more testing with a stock 2.6.34 "Debian" kernel using a minimal initrd and blacklisting as many modules as possible (list of involved modules attached). With this setup, testing results became even more random ;(. The only maybe worthy observation: * Most (like 4 out of 5) bootups boot in a "good state" -- meaning I can run my test again and again without failure. * When in such a "good state", modprobing "ehci-hcd" (usb on pci pulling in quite some internal usb devices) always triggers the "bad state". * When in such a "good state", modprobing "r8169" (net on pci) often (but not always) triggers the "bad state". Ok, this all sounds a bit whacky -- but the race may be related to (other) data on the pci bus? This would at least explain the randomness. Anyway, I am still stumped, and lacking in-depth kernel knowledge to further debug this -- so I'd appreciate any hints to deliver better information. Thx, Stephan [-- Attachment #2: 1279465070_power_boot_dmesg.2.6.34-1-amd64 --] [-- Type: text/plain, Size: 42178 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.2~ab50+1) (absurd@olurdix.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sun Jun 20 19:38:23 UTC 2010 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.34-1-amd64 root=/dev/mapper/weslok-root ro single [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdea8000 (usable) [ 0.000000] BIOS-e820: 00000000bdea8000 - 00000000bdebf000 (reserved) [ 0.000000] BIOS-e820: 00000000bdebf000 - 00000000bdf81000 (usable) [ 0.000000] BIOS-e820: 00000000bdf81000 - 00000000bdfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdfbf000 - 00000000bdfe1000 (usable) [ 0.000000] BIOS-e820: 00000000bdfe1000 - 00000000bdff7000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdff7000 - 00000000be000000 (usable) [ 0.000000] BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0FFF00000 mask FFFF00000 write-protect [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000be000000 [ 0.000000] 0000000000 - 00be000000 page 2M [ 0.000000] kernel direct mapping tables up to be000000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000 [ 0.000000] RAMDISK: 37c85000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000bdff6120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 00000000bdff4000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 00000000bdfe4000 0B7CC (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS 00000000bdf8d000 00040 [ 0.000000] ACPI: DMAR 00000000bdff5000 000B0 (v01 ? 00000001 00000000) [ 0.000000] ACPI: HPET 00000000bdff3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 00000000bdff2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 00000000bdff1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: ASF! 00000000bdff0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 00000000bdfe3000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: BOOT 00000000bdfe2000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000bdfe1000 00655 (v01 PmRef CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] bootmap [0000000100005000 - 000000010002cfff] pages 28 [ 0.000000] (10/32 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0001000000 - 000189ae64] TEXT DATA BSS ==> [0001000000 - 000189ae64] [ 0.000000] #1 [0037c85000 - 0037ff0000] RAMDISK ==> [0037c85000 - 0037ff0000] [ 0.000000] #2 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #3 [000189b000 - 000189b1ec] BRK ==> [000189b000 - 000189b1ec] [ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] [ 0.000000] #5 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] #8 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000] [ 0.000000] #9 [0100005000 - 010002d000] BOOTMAP ==> [0100005000 - 010002d000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100600000-ffff880103dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bdea8 [ 0.000000] 0: 0x000bdebf -> 0x000bdf81 [ 0.000000] 0: 0x000bdfbf -> 0x000bdfe1 [ 0.000000] 0: 0x000bdff7 -> 0x000be000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1040178 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 759757 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bdea8000 - 00000000bdebf000 [ 0.000000] PM: Registered nosave memory: 00000000bdf81000 - 00000000bdfbf000 [ 0.000000] PM: Registered nosave memory: 00000000bdfe1000 - 00000000bdff7000 [ 0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s89192 r8192 d21400 u524288 [ 0.000000] pcpu-alloc: s89192 r8192 d21400 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1022151 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.34-1-amd64 root=/dev/mapper/weslok-root ro single [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4024212k/5242880k available (3073k kernel code, 1082168k absent, 136500k reserved, 3753k data, 588k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.874 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.74 BogoMIPS (lpj=10107496) [ 0.004383] Security Framework initialized [ 0.004561] SELinux: Disabled at boot. [ 0.005001] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009864] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011001] Mount-cache hash table entries: 256 [ 0.011312] Initializing cgroup subsys ns [ 0.011491] Initializing cgroup subsys cpuacct [ 0.011669] Initializing cgroup subsys devices [ 0.011845] Initializing cgroup subsys freezer [ 0.012011] Initializing cgroup subsys net_cls [ 0.012186] Initializing cgroup subsys blkio [ 0.012392] CPU: Physical Processor ID: 0 [ 0.012567] CPU: Processor Core ID: 0 [ 0.012743] mce: CPU supports 6 MCE banks [ 0.012924] CPU0: Thermal monitoring enabled (TM1) [ 0.013103] using mwait in idle threads. [ 0.013278] Performance Events: Core2 events, Intel PMU driver. [ 0.013779] ... version: 2 [ 0.013954] ... bit width: 40 [ 0.014128] ... generic registers: 2 [ 0.014303] ... value mask: 000000ffffffffff [ 0.014479] ... max period: 000000007fffffff [ 0.014656] ... fixed-purpose events: 3 [ 0.014830] ... event mask: 0000000700000003 [ 0.015847] ACPI: Core revision 20100121 [ 0.032074] DMAR: Host address width 36 [ 0.032250] DMAR: DRHD base: 0x000000feb03000 flags: 0x0 [ 0.032431] IOMMU feb03000: ver 1:0 cap c9008020e30260 ecap 1000 [ 0.032609] DMAR: DRHD base: 0x000000feb02000 flags: 0x1 [ 0.032789] IOMMU feb02000: ver 1:0 cap c9008020630260 ecap 1000 [ 0.032967] DMAR: RMRR base: 0xf00021a4f00021a4 end: 0xf000e987f000fea5 [ 0.036003] DMAR: No ATSR found [ 0.036183] Setting APIC routing to flat [ 0.036668] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076594] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.080000] Booting Node 0, Processors #1 [ 0.168013] Brought up 2 CPUs [ 0.172002] Total of 2 processors activated (10107.72 BogoMIPS). [ 0.172757] devtmpfs: initialized [ 0.176362] regulator: core version 0.5 [ 0.176567] NET: Registered protocol family 16 [ 0.176814] ACPI: bus type pci registered [ 0.177048] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.177244] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.185127] PCI: Using configuration type 1 for base access [ 0.185598] bio: create slab <bio-0> at 0 [ 0.185598] ACPI: EC: Look up EC in DSDT [ 0.190694] ACPI: BIOS _OSI(Linux) query ignored [ 0.321131] ACPI: SSDT 00000000bdeb4c18 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20060317) [ 0.322259] ACPI: SSDT 00000000bdeb2618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20060317) [ 0.323592] ACPI: SSDT 00000000bdeb3e18 001CF (v01 PmRef ApIst 00003000 INTL 20060317) [ 0.324520] ACPI: SSDT 00000000bdeb4f18 0008D (v01 PmRef ApCst 00003000 INTL 20060317) [ 0.326196] ACPI: Interpreter enabled [ 0.326196] ACPI: (supports S0 S3 S4 S5) [ 0.328509] ACPI: Using IOAPIC for interrupt routing [ 0.338289] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.338686] ACPI: No dock devices found. [ 0.338862] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.339623] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.340706] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.340885] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.341064] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.341258] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.341473] DMAR: Forcing write-buffer flush capability [ 0.341685] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.341688] pci 0000:00:01.0: PME# disabled [ 0.341761] pci 0000:00:1a.0: reg 20: [io 0x80e0-0x80ff] [ 0.341834] pci 0000:00:1a.1: reg 20: [io 0x80c0-0x80df] [ 0.341905] pci 0000:00:1a.7: reg 10: [mem 0xdd005c00-0xdd005fff] [ 0.341966] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.341970] pci 0000:00:1a.7: PME# disabled [ 0.342007] pci 0000:00:1b.0: reg 10: [mem 0xdd000000-0xdd003fff 64bit] [ 0.342054] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.342058] pci 0000:00:1b.0: PME# disabled [ 0.342131] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.342135] pci 0000:00:1c.0: PME# disabled [ 0.342211] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.342214] pci 0000:00:1c.1: PME# disabled [ 0.342293] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.342296] pci 0000:00:1c.3: PME# disabled [ 0.342372] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.342375] pci 0000:00:1c.4: PME# disabled [ 0.342451] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.342455] pci 0000:00:1c.5: PME# disabled [ 0.342511] pci 0000:00:1d.0: reg 20: [io 0x80a0-0x80bf] [ 0.342584] pci 0000:00:1d.1: reg 20: [io 0x8080-0x809f] [ 0.342656] pci 0000:00:1d.2: reg 20: [io 0x8060-0x807f] [ 0.342729] pci 0000:00:1d.3: reg 20: [io 0x8040-0x805f] [ 0.342799] pci 0000:00:1d.7: reg 10: [mem 0xdd005800-0xdd005bff] [ 0.342860] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.342864] pci 0000:00:1d.7: PME# disabled [ 0.343047] pci 0000:00:1f.2: reg 10: [io 0x8108-0x810f] [ 0.343053] pci 0000:00:1f.2: reg 14: [io 0x8114-0x8117] [ 0.343058] pci 0000:00:1f.2: reg 18: [io 0x8100-0x8107] [ 0.343064] pci 0000:00:1f.2: reg 1c: [io 0x8110-0x8113] [ 0.343070] pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f] [ 0.343076] pci 0000:00:1f.2: reg 24: [mem 0xdd005000-0xdd0057ff] [ 0.343111] pci 0000:00:1f.2: PME# supported from D3hot [ 0.343115] pci 0000:00:1f.2: PME# disabled [ 0.343145] pci 0000:00:1f.3: reg 10: [mem 0xdd006000-0xdd0060ff 64bit] [ 0.343159] pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f] [ 0.343210] pci 0000:00:1f.6: reg 10: [mem 0xdd004000-0xdd004fff 64bit] [ 0.343335] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] [ 0.343356] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.343375] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit] [ 0.343389] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f] [ 0.343403] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.348024] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.348202] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.348204] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff] [ 0.348208] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.348306] pci 0000:02:00.0: reg 10: [mem 0xdc000000-0xdc001fff 64bit] [ 0.348405] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.348412] pci 0000:02:00.0: PME# disabled [ 0.356018] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.356197] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.356200] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xdcffffff] [ 0.356207] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.356282] pci 0000:03:00.0: reg 10: [io 0x5000-0x50ff] [ 0.356303] pci 0000:03:00.0: reg 18: [mem 0xd4010000-0xd4010fff 64bit pref] [ 0.356318] pci 0000:03:00.0: reg 20: [mem 0xd4000000-0xd400ffff 64bit pref] [ 0.356327] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.356370] pci 0000:03:00.0: supports D1 D2 [ 0.356371] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.356376] pci 0000:03:00.0: PME# disabled [ 0.364014] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.364193] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.364197] pci 0000:00:1c.1: bridge window [mem 0xdb000000-0xdbffffff] [ 0.364203] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref] [ 0.364249] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.364428] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.364432] pci 0000:00:1c.3: bridge window [mem 0xda000000-0xdaffffff] [ 0.364438] pci 0000:00:1c.3: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref] [ 0.364520] pci 0000:06:00.0: reg 10: [mem 0xd9000000-0xd90007ff] [ 0.364531] pci 0000:06:00.0: reg 14: [mem 0xd9000d00-0xd9000d7f] [ 0.364559] pci 0000:06:00.0: reg 20: [mem 0xd9000c80-0xd9000cff] [ 0.364570] pci 0000:06:00.0: reg 24: [mem 0xd9000c00-0xd9000c7f] [ 0.364674] pci 0000:06:00.1: reg 10: [mem 0xd9000b00-0xd9000bff] [ 0.364805] pci 0000:06:00.2: reg 10: [mem 0xd9000a00-0xd9000aff] [ 0.364936] pci 0000:06:00.3: reg 10: [mem 0xd9000900-0xd90009ff] [ 0.365067] pci 0000:06:00.4: reg 10: [mem 0xd9000800-0xd90008ff] [ 0.372021] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.372200] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.372204] pci 0000:00:1c.4: bridge window [mem 0xd9000000-0xd9ffffff] [ 0.372210] pci 0000:00:1c.4: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref] [ 0.372256] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 0.372435] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.372439] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff] [ 0.372445] pci 0000:00:1c.5: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref] [ 0.372514] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) [ 0.372695] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.372699] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.372705] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.372708] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.372710] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.372712] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.372714] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.372750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.372987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.373071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.373214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.373299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.373396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.373481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.373617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] [ 0.379814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.381588] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.383500] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.385424] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.387335] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.389260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.391171] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.393092] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.395328] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.395525] vgaarb: loaded [ 0.395742] PCI: Using ACPI for IRQ routing [ 0.396002] PCI: pci_cache_line_size set to 64 bytes [ 0.396129] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.396131] reserve RAM buffer: 00000000bdea8000 - 00000000bfffffff [ 0.396134] reserve RAM buffer: 00000000bdf81000 - 00000000bfffffff [ 0.396136] reserve RAM buffer: 00000000bdfe1000 - 00000000bfffffff [ 0.396138] reserve RAM buffer: 00000000be000000 - 00000000bfffffff [ 0.396202] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.396385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.397367] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.400016] Switching to clocksource tsc [ 0.401053] pnp: PnP ACPI init [ 0.401232] ACPI: bus type pnp registered [ 0.403689] alloc irq_desc for 23 on node 0 [ 0.403691] alloc kstat_irqs on node 0 [ 0.403938] pnp: PnP ACPI: found 12 devices [ 0.404114] ACPI: ACPI bus type pnp unregistered [ 0.404295] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.404476] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.404655] system 00:02: [io 0x0600-0x060f] has been reserved [ 0.404832] system 00:02: [io 0x0610] has been reserved [ 0.405010] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.405188] system 00:02: [io 0x0810-0x0817] has been reserved [ 0.405366] system 00:02: [io 0x0820-0x0823] has been reserved [ 0.405544] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.405722] system 00:02: [io 0x0500-0x053f] has been reserved [ 0.405900] system 00:02: [io 0x0380-0x038e] has been reserved [ 0.406078] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.406257] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.406436] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.406615] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.406795] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.406974] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.407154] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.407333] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.407512] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.407697] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.412517] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.412712] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.412957] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000) [ 0.413136] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.413313] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.413493] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff] [ 0.413673] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.413868] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.414046] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.414227] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xdcffffff] [ 0.414407] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.414605] pci 0000:03:00.0: BAR 6: assigned [mem 0xd4020000-0xd402ffff pref] [ 0.414798] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.414975] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.415157] pci 0000:00:1c.1: bridge window [mem 0xdb000000-0xdbffffff] [ 0.415338] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref] [ 0.415535] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.415717] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.415897] pci 0000:00:1c.3: bridge window [mem 0xda000000-0xdaffffff] [ 0.416078] pci 0000:00:1c.3: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref] [ 0.416276] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.416453] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.416635] pci 0000:00:1c.4: bridge window [mem 0xd9000000-0xd9ffffff] [ 0.416815] pci 0000:00:1c.4: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref] [ 0.417012] pci 0000:00:1c.5: PCI bridge to [bus 07-09] [ 0.417190] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.417372] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff] [ 0.417553] pci 0000:00:1c.5: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref] [ 0.417750] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] [ 0.417926] pci 0000:00:1e.0: bridge window [io disabled] [ 0.418106] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.418285] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.418470] alloc irq_desc for 16 on node -1 [ 0.418472] alloc kstat_irqs on node -1 [ 0.418478] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.418658] pci 0000:00:01.0: setting latency timer to 64 [ 0.418665] alloc irq_desc for 17 on node -1 [ 0.418666] alloc kstat_irqs on node -1 [ 0.418669] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.418850] pci 0000:00:1c.0: setting latency timer to 64 [ 0.418858] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.419039] pci 0000:00:1c.1: setting latency timer to 64 [ 0.419046] alloc irq_desc for 19 on node -1 [ 0.419048] alloc kstat_irqs on node -1 [ 0.419050] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.419231] pci 0000:00:1c.3: setting latency timer to 64 [ 0.419239] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.419419] pci 0000:00:1c.4: setting latency timer to 64 [ 0.419427] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.419607] pci 0000:00:1c.5: setting latency timer to 64 [ 0.419613] pci 0000:00:1e.0: setting latency timer to 64 [ 0.419617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.419618] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.419620] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.419622] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff] [ 0.419624] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 0.419625] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff] [ 0.419627] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.419629] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.419631] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdcffffff] [ 0.419633] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref] [ 0.419634] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.419636] pci_bus 0000:03: resource 1 [mem 0xdb000000-0xdbffffff] [ 0.419638] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref] [ 0.419640] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.419641] pci_bus 0000:05: resource 1 [mem 0xda000000-0xdaffffff] [ 0.419643] pci_bus 0000:05: resource 2 [mem 0xd5000000-0xd5ffffff 64bit pref] [ 0.419645] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] [ 0.419647] pci_bus 0000:06: resource 1 [mem 0xd9000000-0xd9ffffff] [ 0.419653] pci_bus 0000:06: resource 2 [mem 0xd6000000-0xd6ffffff 64bit pref] [ 0.419655] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.419656] pci_bus 0000:07: resource 1 [mem 0xd8000000-0xd8ffffff] [ 0.419658] pci_bus 0000:07: resource 2 [mem 0xd7000000-0xd7ffffff 64bit pref] [ 0.419660] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] [ 0.419662] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] [ 0.419663] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] [ 0.419665] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff] [ 0.419684] NET: Registered protocol family 2 [ 0.419962] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.421031] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.424792] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.425425] TCP: Hash tables configured (established 524288 bind 65536) [ 0.425605] TCP reno registered [ 0.425784] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.425997] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.426314] NET: Registered protocol family 1 [ 0.426903] pci 0000:01:00.0: Boot video device [ 0.426933] PCI: CLS 64 bytes, default 64 [ 0.426990] Unpacking initramfs... [ 0.489836] Freeing initrd memory: 3500k freed [ 0.491154] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.491336] Placing 64MB software IO TLB between ffff880001b9d000 - ffff880005b9d000 [ 0.491530] software IO TLB at phys 0x1b9d000 - 0x5b9d000 [ 0.491811] Simple Boot Flag at 0x44 set to 0x1 [ 0.492260] audit: initializing netlink socket (disabled) [ 0.492447] type=2000 audit(1279464989.491:1): initialized [ 0.492960] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.494214] VFS: Disk quotas dquot_6.5.2 [ 0.494424] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.494672] msgmni has been set to 7866 [ 0.494993] alg: No test for stdrng (krng) [ 0.495207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.495401] io scheduler noop registered [ 0.495576] io scheduler deadline registered [ 0.495799] io scheduler cfq registered (default) [ 0.496058] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.496078] alloc irq_desc for 24 on node -1 [ 0.496079] alloc kstat_irqs on node -1 [ 0.496088] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.496143] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.496178] alloc irq_desc for 25 on node -1 [ 0.496179] alloc kstat_irqs on node -1 [ 0.496186] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.496259] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.496293] alloc irq_desc for 26 on node -1 [ 0.496294] alloc kstat_irqs on node -1 [ 0.496301] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.496375] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.496409] alloc irq_desc for 27 on node -1 [ 0.496410] alloc kstat_irqs on node -1 [ 0.496417] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.496491] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.496525] alloc irq_desc for 28 on node -1 [ 0.496526] alloc kstat_irqs on node -1 [ 0.496533] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.496608] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.496643] alloc irq_desc for 29 on node -1 [ 0.496644] alloc kstat_irqs on node -1 [ 0.496651] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X [ 0.496731] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS [ 0.497095] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.497275] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.497453] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.497457] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS [ 0.497665] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.497844] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.498025] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.498028] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS [ 0.498237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.498416] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.498596] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.498600] pcieport 0000:00:1c.3: Requesting control of PCIe PME from ACPI BIOS [ 0.498806] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.498987] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.498991] pcieport 0000:00:1c.4: Requesting control of PCIe PME from ACPI BIOS [ 0.499200] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.499379] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 0.499557] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt [ 0.499741] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt [ 0.512760] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt [ 0.512939] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt [ 0.513119] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.513123] pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS [ 0.513330] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.513512] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.514700] Linux agpgart interface v0.103 [ 0.514934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.515418] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 0.537642] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.537822] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.538038] mice: PS/2 mouse device common for all mice [ 0.538245] rtc_cmos 00:04: RTC can wake from S4 [ 0.538453] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.538668] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.538861] cpuidle: using governor ladder [ 0.539049] cpuidle: using governor menu [ 0.539236] No iBFT detected. [ 0.539588] TCP cubic registered [ 0.539847] NET: Registered protocol family 10 [ 0.540287] lo: Disabled Privacy Extensions [ 0.540615] Mobile IPv6 [ 0.540788] NET: Registered protocol family 17 [ 0.541025] PM: Resume from disk failed. [ 0.541029] registered taskstats version 1 [ 0.541645] rtc_cmos 00:04: setting system clock to 2010-07-18 14:56:29 UTC (1279464989) [ 0.541875] Initalizing network drop monitor service [ 0.542091] Freeing unused kernel memory: 588k freed [ 0.542446] Write protecting the kernel read-only data: 6144k [ 0.542731] Freeing unused kernel memory: 1004k freed [ 0.543276] Freeing unused kernel memory: 848k freed [ 0.559986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.578963] SCSI subsystem initialized [ 0.589453] libata version 3.00 loaded. [ 0.592018] ahci 0000:00:1f.2: version 3.0 [ 0.592034] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.592255] alloc irq_desc for 30 on node -1 [ 0.592257] alloc kstat_irqs on node -1 [ 0.592267] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 0.592304] ahci: SSS flag set, parallel bus scan disabled [ 0.592504] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.592699] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 0.592896] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.615821] scsi0 : ahci [ 0.616052] scsi1 : ahci [ 0.616261] scsi2 : ahci [ 0.616468] scsi3 : ahci [ 0.616677] scsi4 : ahci [ 0.616885] scsi5 : ahci [ 0.617221] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 30 [ 0.617416] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 30 [ 0.617608] ata3: DUMMY [ 0.617780] ata4: DUMMY [ 0.617953] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 30 [ 0.618147] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 30 [ 1.092010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.092999] ata1.00: ATA-8: ST9500325AS, 0002SPM1, max UDMA/133 [ 1.093177] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.094381] ata1.00: configured for UDMA/133 [ 1.108080] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5 [ 1.996010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.004115] ata2.00: ATAPI: HL-DT-ST BDDVDRW CT10L, YC07, max UDMA/100 [ 2.013920] ata2.00: configured for UDMA/100 [ 2.143196] scsi 1:0:0:0: CD-ROM HL-DT-ST BDDVDRW CT10L YC07 PQ: 0 ANSI: 5 [ 2.460011] ata5: SATA link down (SStatus 0 SControl 300) [ 2.796010] ata6: SATA link down (SStatus 0 SControl 300) [ 2.828912] [Firmware Bug]: Invalid critical threshold (0) [ 2.830666] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.830848] ACPI: Thermal Zone [TZ01] (57 C) [ 3.119552] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.119790] sd 0:0:0:0: [sda] Write Protect is off [ 3.119969] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.119987] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.120296] sda: sda1 sda2 sda3 [ 3.493872] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.730679] device-mapper: uevent: version 1.0.3 [ 3.731858] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 11.022370] PM: Starting manual resume from disk [ 11.022547] PM: Resume from partition 254:2 [ 11.022548] PM: Checking hibernation image. [ 11.022899] PM: Error -22 checking image file [ 11.022900] PM: Resume from disk failed. [ 11.040990] EXT3-fs (dm-1): recovery required on readonly filesystem [ 11.041491] EXT3-fs (dm-1): write access will be enabled during recovery [ 11.335518] kjournald starting. Commit interval 5 seconds [ 11.335710] EXT3-fs (dm-1): recovery complete [ 11.349907] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 14.304288] udevd version 125 started [ 15.223096] sdhci: Secure Digital Host Controller Interface driver [ 15.223291] sdhci: Copyright(c) Pierre Ossman [ 15.227518] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0) [ 15.227732] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.228006] sdhci-pci 0000:06:00.1: setting latency timer to 64 [ 15.228048] Registered led device: mmc0:: [ 15.228076] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA [ 15.228265] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0) [ 15.228476] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.228692] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface. [ 15.228878] sdhci-pci 0000:06:00.2: PCI INT A disabled [ 15.324513] mmc0: new SD card at address b368 [ 15.470757] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 15.470957] Uniform CD-ROM driver Revision: 3.20 [ 15.471213] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 17.180232] mmcblk0: mmc0:b368 TWTTI 489 MiB [ 17.180452] mmcblk0: p1 p2 [ 20.750309] EXT3-fs (dm-1): using internal journal [ 21.145135] loop: module loaded [ 22.376210] Adding 24653820k swap on /dev/mapper/weslok-swap. Priority:-1 extents:1 across:24653820k [ 23.166504] fuse init (API version 7.13) [ 32.240867] RPC: Registered udp transport module. [ 32.241062] RPC: Registered tcp transport module. [ 32.241239] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 32.372268] Slow work thread pool: Starting up [ 32.372479] Slow work thread pool: Ready [ 32.372704] FS-Cache: Loaded [ 32.502481] FS-Cache: Netfs 'nfs' registered for caching [ 32.736177] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [-- Attachment #3: 1279465070_power_boot_dmesg.2.6.34-1-amd64.lsmod --] [-- Type: text/plain, Size: 1669 bytes --] Module Size Used by nfsd 256006 2 exportfs 3242 1 nfsd nfs 242626 0 lockd 58867 2 nfsd,nfs fscache 30322 1 nfs nfs_acl 2039 2 nfsd,nfs auth_rpcgss 33652 2 nfsd,nfs sunrpc 162440 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss fuse 50718 1 ext2 53750 1 loop 11910 2 mmc_block 7836 0 tpm_tis 7344 0 tpm 9901 1 tpm_tis tpm_bios 4529 1 tpm sr_mod 12618 0 cdrom 29406 1 sr_mod sdhci_pci 6338 0 sdhci 14102 1 sdhci_pci mmc_core 47651 2 mmc_block,sdhci led_class 2187 1 sdhci ext3 107158 1 jbd 38117 1 ext3 mbcache 5058 2 ext2,ext3 sha256_generic 8700 2 aes_x86_64 7348 2 aes_generic 25706 1 aes_x86_64 cbc 2547 1 dm_crypt 10816 1 dm_mirror 11881 0 dm_region_hash 6864 1 dm_mirror dm_log 7677 2 dm_mirror,dm_region_hash dm_snapshot 25072 0 dm_mod 55622 20 dm_crypt,dm_mirror,dm_log,dm_snapshot sd_mod 30877 3 crc_t10dif 1284 1 sd_mod thermal 12009 0 fan 3274 0 thermal_sys 12006 2 thermal,fan ahci 34368 2 libata 135105 1 ahci scsi_mod 124629 3 sr_mod,sd_mod,libata ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <bug-15836-2531@https.bugzilla.kernel.org/>]
[parent not found: <201004282338.o3SNcfHW007926@demeter.kernel.org>]
* Re: [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] [not found] ` <201004282338.o3SNcfHW007926@demeter.kernel.org> @ 2010-04-30 16:53 ` Stephan Sürken 0 siblings, 0 replies; 9+ messages in thread From: Stephan Sürken @ 2010-04-30 16:53 UTC (permalink / raw) To: bugzilla-daemon, matt; +Cc: Andi Kleen, linux-mmc, Andrew Morton Matt, On Wed, 2010-04-28 at 23:38 +0000, bugzilla-daemon@bugzilla.kernel.org wrote: > https://bugzilla.kernel.org/show_bug.cgi?id=15836 (...) > this one definitely looks strange. ok, I am desperate. Maybe its time to just throw out any information I can think of right now, hoping for some educated guess ;). > Have you tried running other diagnostic tools on you SD card, e.g. fsck? Actually, s.th. like "mkfs;fsck --force" was my initial test before I switched to badblocks. As for bad media, the laptop is my working horse. I work on it every day; when I work on it, the sd card is in use. I had no issues with it whatsoever until I switched to 2.6.32, and I continue to have no issues (sticking to a 2.6.30 kernel) with the very same card. And yes, after I found the kernel upgrade broke it, I tested with a different sd card with the same results. So it's definitely not a media problem. > How about on your hard disks or other mass storage devices? Ok, good point (although I booted from the hard disk for the tests). I run the same badblocks test (with a "bad" kernel) on a hard disk partition and on an usb stick without issues. So it's not a general mass storage problem. > Is it always the same block that's reported as bad? Ok, good point. I noted that they seem to be different, but I did not care much yet. Now I have retested on a bad kernel (actually stock 2.6.33.2), running the test 5 times (0-4) in a row, and this three times on three bootups; the number is the first found bad blocks: Boot 0: 0 14144 1-4 64 Boot 1 (warm boot): 0 64 1-4 64 Boot 2 (cold boot): 0 140 1-4 76 Fwiw, read-only badblock tests always work fine. > Were you doing any suspend/hibernation during these tests? No, all tests after fresh reboot. > It might also be an idea to turn on > CONFIG_DEBUG_PAGEALLOC and run badblocks again. > > If you turn off CONFIG_HOTPLUG and CONFIG_HIBERNATION on a recent kernel > does it work then? Ok, later ;). Thx, Stephan -- Stephan Sürken <absurd at olurdix.de> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-07-20 19:55 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-15836-27@https.bugzilla.kernel.org/>
[not found] ` <201004262048.o3QKml95025961@demeter.kernel.org>
2010-04-26 20:58 ` [Bug 15836] Commit 6ad696d2cf535772dff659298ec7e7260e344595 breaks my SD card reader [197b:2381] Andrew Morton
2010-04-27 10:59 ` Stephan Suerken
2010-04-28 22:41 ` Matt Fleming
2010-04-30 17:06 ` Andi Kleen
2010-05-01 18:47 ` Stephan Sürken
2010-05-01 23:04 ` Andi Kleen
[not found] ` <1272912441.7490.6.camel@weslok.olx.intra>
2010-05-04 20:13 ` Andi Kleen
2010-07-20 19:53 ` Stephan Sürken
[not found] <bug-15836-2531@https.bugzilla.kernel.org/>
[not found] ` <201004282338.o3SNcfHW007926@demeter.kernel.org>
2010-04-30 16:53 ` Stephan Sürken
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).