From: Ben Dooks <ben-linux@fluff.org>
To: akpm@linux-foundation.org
Cc: mm-commits@vger.kernel.org, mcuelenaere@gmail.com,
ben-linux@fluff.org, linux-mmc@vger.kernel.org,
thomas.ab@samsung.com
Subject: Re: + s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-bui ld.patch added to -mm tree
Date: Thu, 6 May 2010 02:21:03 +0100 [thread overview]
Message-ID: <20100506012103.GR2589@trinity.fluff.org> (raw)
In-Reply-To: <201005042346.o44Nk6Oi025952@imap1.linux-foundation.org>
On Tue, May 04, 2010 at 04:46:06PM -0700, akpm@linux-foundation.org wrote:
>
> The patch titled
> mmc: s3c6410: add new quirk in sdhci driver and update ADMA descriptor build.
> has been added to the -mm tree. Its filename is
> s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build.patch
>
> Before you just go and hit "reply", please:
> a) Consider who else should be cc'ed
> b) Prefer to cc a suitable mailing list as well
> c) Ideally: find the original patch on the mailing list and do a
> reply-to-all to that, adding suitable additional cc's
>
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
> See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
> out what to do about this
>
> The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
>
> ------------------------------------------------------
> Subject: mmc: s3c6410: add new quirk in sdhci driver and update ADMA descriptor build.
> From: Maurus Cuelenaere <mcuelenaere@gmail.com>
originally from Thomas Abraham <thomas.ab@samsung.com>
and resent by Maurus Cuelenaere <mcuelenaere@gmail.com>
see also same with second patch.
> The s3c6410 sdhci controller does not support the 'End' attribute and NOP
> attribute in the same 8-Byte ADMA descriptor. This patch adds a new quirk
> to identify sdhci host contollers with such behaviour. In addition to
> this, for controllers using the new quirk, the last entry in the ADMA
> descritor table is marked with the 'End' attribute (instead of using a NOP
> descriptor with 'End' attribute).
>
> Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Acked-by: Ben Dooks <ben-linux@fluff.org>
> Cc: <linux-mmc@vger.kernel.org>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
> drivers/mmc/host/sdhci.c | 20 +++++++++++++++-----
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 17 insertions(+), 5 deletions(-)
>
> diff -puN drivers/mmc/host/sdhci.c~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build drivers/mmc/host/sdhci.c
> --- a/drivers/mmc/host/sdhci.c~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build
> +++ a/drivers/mmc/host/sdhci.c
> @@ -496,12 +496,22 @@ static int sdhci_adma_table_pre(struct s
> WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
> }
>
> - /*
> - * Add a terminating entry.
> - */
> + if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
> + /*
> + * Mark the last descriptor as the terminating descriptor
> + */
> + if (desc != host->adma_desc) {
> + desc -= 8;
> + desc[0] |= 0x2; /* end */
> + }
> + } else {
> + /*
> + * Add a terminating entry.
> + */
>
> - /* nop, end, valid */
> - sdhci_set_adma_desc(desc, 0, 0, 0x3);
> + /* nop, end, valid */
> + sdhci_set_adma_desc(desc, 0, 0, 0x3);
> + }
>
> /*
> * Resync align buffer as we might have changed it.
> diff -puN drivers/mmc/host/sdhci.h~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build drivers/mmc/host/sdhci.h
> --- a/drivers/mmc/host/sdhci.h~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build
> +++ a/drivers/mmc/host/sdhci.h
> @@ -238,6 +238,8 @@ struct sdhci_host {
> #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
> /* Controller reports wrong base clock capability */
> #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
> +/* Controller cannot support End Attribute in NOP ADMA descriptor */
> +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
>
> int irq; /* Device IRQ */
> void __iomem * ioaddr; /* Mapped address */
> _
>
> Patches currently in -mm which might be from mcuelenaere@gmail.com are
>
> s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build.patch
> s3c6410-enable-adma-feature-in-6410-sdhci-controller.patch
> sdhci-enable-multiblock-transfers-in-sdhci-s3c.patch
> s3c-rtc-driver-add-support-for-s3c64xx.patch
>
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
prev parent reply other threads:[~2010-05-06 1:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-04 23:46 + s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build.patch added to -mm tree akpm
2010-05-06 1:21 ` Ben Dooks [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100506012103.GR2589@trinity.fluff.org \
--to=ben-linux@fluff.org \
--cc=akpm@linux-foundation.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mcuelenaere@gmail.com \
--cc=mm-commits@vger.kernel.org \
--cc=thomas.ab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).