public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: g.liakhovetski@gmx.de, ian@mnementh.co.uk, lethal@linux-sh.org,
	linux-mmc@vger.kernel.org, magnus.damm@gmail.com,
	sameo@linux.intel.com
Subject: + tmio-add-a-platform-flag-to-disable-card-write-protection-detection.patch added to -mm tree
Date: Fri, 21 May 2010 12:39:11 -0700	[thread overview]
Message-ID: <201005211939.o4LJdCIe030293@imap1.linux-foundation.org> (raw)


The patch titled
     tmio: add a platform flag to disable card write-protection detection
has been added to the -mm tree.  Its filename is
     tmio-add-a-platform-flag-to-disable-card-write-protection-detection.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: tmio: add a platform flag to disable card write-protection detection
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Write-protection status is not always available, e.g., micro-SD cards do
not have a write-protection switch at all.  This patch adds a flag to let
platforms force tmio_mmc to consider the card writable.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/mmc/host/tmio_mmc.c |    5 ++++-
 include/linux/mfd/tmio.h    |    4 ++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff -puN drivers/mmc/host/tmio_mmc.c~tmio-add-a-platform-flag-to-disable-card-write-protection-detection drivers/mmc/host/tmio_mmc.c
--- a/drivers/mmc/host/tmio_mmc.c~tmio-add-a-platform-flag-to-disable-card-write-protection-detection
+++ a/drivers/mmc/host/tmio_mmc.c
@@ -746,8 +746,11 @@ static void tmio_mmc_set_ios(struct mmc_
 static int tmio_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
+	struct mfd_cell	*cell = host->pdev->dev.platform_data;
+	struct tmio_mmc_data *pdata = cell->driver_data;
 
-	return (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+	return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+		(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1;
 }
 
 static const struct mmc_host_ops tmio_mmc_ops = {
diff -puN include/linux/mfd/tmio.h~tmio-add-a-platform-flag-to-disable-card-write-protection-detection include/linux/mfd/tmio.h
--- a/include/linux/mfd/tmio.h~tmio-add-a-platform-flag-to-disable-card-write-protection-detection
+++ a/include/linux/mfd/tmio.h
@@ -50,6 +50,9 @@
 		tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
 	} while (0)
 
+/* tmio MMC platform flags */
+#define TMIO_MMC_WRPROTECT_DISABLE	(1 << 0)
+
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
@@ -66,6 +69,7 @@ struct tmio_mmc_dma {
 struct tmio_mmc_data {
 	unsigned int			hclk;
 	unsigned long			capabilities;
+	unsigned long			flags;
 	struct tmio_mmc_dma		*dma;
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
_

Patches currently in -mm which might be from g.liakhovetski@gmx.de are

origin.patch
linux-next.patch
media-ak881x-needs-slabh.patch
sh-define-dma-slaves-per-cpu-type-remove-now-redundant-header.patch
sh-add-dma-slaves-for-two-sdhi-controllers-to-sh7722.patch
sh-add-dma-slave-definitions-to-sh7724.patch
mmc-prepare-tmio_mmc-for-passing-of-dma-configuration-from-the-mfd-cell.patch
sh-prepare-the-sdhi-mfd-driver-to-pass-dma-configuration-to-tmio_mmcc.patch
mmc-add-dma-support-to-tmio_mmc-driver-when-used-on-superh.patch
sh-add-sdhi-dma-support-to-ecovec.patch
sh-add-sdhi-dma-support-to-ms7724se.patch
sh-add-sdhi-dma-support-to-kfr2r09.patch
sh-add-sdhi-dma-support-to-migor.patch
arm-add-dma-support-to-sh7372-enable-dma-for-sdhi.patch
tmio-add-a-platform-flag-to-disable-card-write-protection-detection.patch
mfd-pass-platform-flags-down-to-the-tmio_mmc-driver.patch
sh-disable-sd-card-write-protection-detection-on-kfr2r09.patch
mmc-let-mfds-provide-supported-vdd-card-voltages-to-tmio_mmc.patch
sh-allow-platforms-to-specify-sd-card-supported-voltages.patch


                 reply	other threads:[~2010-05-21 19:39 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201005211939.o4LJdCIe030293@imap1.linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=g.liakhovetski@gmx.de \
    --cc=ian@mnementh.co.uk \
    --cc=lethal@linux-sh.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mm-commits@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox