From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philip Langdale Subject: Re: [PATCH] mmc: make sdhci work with ricoh mmc controller Date: Thu, 3 Jun 2010 10:05:10 -0700 Message-ID: <20100603100510.37d02c2b@fido5> References: <1275516180.30272.4.camel@maxim-laptop> <1275527787-3783-1-git-send-email-maximlevitsky@gmail.com> <20100603091113.7b1d6fc0@fido5> <1275582709.2563.19.camel@maxim-laptop> <20100603093914.3397ac42@fido5> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from usul.saidi.cx ([204.11.33.34]:60072 "EHLO usul.overt.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752155Ab0FCRFQ (ORCPT ); Thu, 3 Jun 2010 13:05:16 -0400 In-Reply-To: <20100603093914.3397ac42@fido5> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Maxim Levitsky Cc: linux-kernel , adq_dvb@lidskialf.net, "linux-mmc@vger.kernel.org" On Thu, 3 Jun 2010 09:39:14 -0700 Philip Langdale wrote: > > > > > > Have you been able to establish if 4bit and high-speed operations > > > work correctly through the MMC controller? I note that you didn't > > > set SDHCI_CAN_DO_HISPD. > > Didn't test that yet, will do. > > I hope my MMCPlus card can do high-speed. > > I should get a chance today to test this as well; I'll let you know > what I see. > Ok, I was able to try it out and setting HISPD works and 4bit seems to work too. My MMCplus cards run at the same speed with either controller. --phil