linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Philip Langdale <philipl@overt.org>
To: maximlevitsky@gmail.com
Cc: linux-mmc@vger.kernel.org,
	linux-kernel <linux-kernel@vger.kernel.org>,
	Andrew de Quincey <adq_dvb@lidskialf.net>
Subject: Re: [PATCH v4] mmc: make sdhci work with ricoh mmc controller
Date: Sun, 13 Jun 2010 09:06:11 -0700	[thread overview]
Message-ID: <20100613090611.18bcfe08@fido5> (raw)
In-Reply-To: <4c128b3a.51a3cc0a.3161.30ab@mx.google.com>

On Fri, 11 Jun 2010 22:15:02 +0300
maximlevitsky@gmail.com wrote:

> From: Maxim Levitsky <maximlevitsky@gmail.com>
> 
> The current way of disabling it is not well tested by vendor
> and has all kinds of bugs that show up on resume from ram/disk.
> 
> Old way of disabling is still supported by
> continuing to use CONFIG_MMC_RICOH_MMC.
> 
> Based on
> 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html'
> Most of the credit for this goes to Andrew de Quincey
> 
> 
> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
> CC: Andrew de Quincey <adq_dvb@lidskialf.net>
> CC: linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>

Acked-by: Philip Langdale <philipl@overt.org>

> ---
>  drivers/mmc/host/sdhci-pci.c |   41
> +++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci.c     |    3 ++- drivers/mmc/host/sdhci.h
> |    4 ++++ 3 files changed, 47 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pci.c
> b/drivers/mmc/host/sdhci-pci.c index 65483fd..e021431 100644
> --- a/drivers/mmc/host/sdhci-pci.c
> +++ b/drivers/mmc/host/sdhci-pci.c
> @@ -17,6 +17,7 @@
>  #include <linux/pci.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/slab.h>
> +#include <linux/device.h>
>  
>  #include <linux/mmc/host.h>
>  
> @@ -84,7 +85,30 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
>  	if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG ||
>  	    chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
>  		chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
> +	return 0;
> +}
> +
> +static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
> +{
> +	slot->host->caps =
> +		((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
> +			& SDHCI_TIMEOUT_CLK_MASK) |
> +
> +		((0x21 << SDHCI_CLOCK_BASE_SHIFT)
> +			& SDHCI_CLOCK_BASE_MASK) |
>  
> +		SDHCI_TIMEOUT_CLK_UNIT |
> +		SDHCI_CAN_VDD_330 |
> +		SDHCI_CAN_DO_SDMA;
> +	return 0;
> +}
> +
> +static int ricoh_mmc_resume(struct sdhci_pci_chip *chip)
> +{
> +	/* Apply a delay to allow controller to settle */
> +	/* Otherwise it becomes confused if card state changed
> +		during suspend */
> +	msleep(500);
>  	return 0;
>  }
>  
> @@ -95,6 +119,15 @@ static const struct sdhci_pci_fixes sdhci_ricoh =
> { SDHCI_QUIRK_CLOCK_BEFORE_RESET,
>  };
>  
> +static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
> +	.probe_slot	= ricoh_mmc_probe_slot,
> +	.resume		= ricoh_mmc_resume,
> +	.quirks		= SDHCI_QUIRK_32BIT_DMA_ADDR |
> +			  SDHCI_QUIRK_CLOCK_BEFORE_RESET |
> +			  SDHCI_QUIRK_NO_CARD_NO_RESET |
> +			  SDHCI_QUIRK_MISSING_CAPS
> +};
> +
>  static const struct sdhci_pci_fixes sdhci_ene_712 = {
>  	.quirks		= SDHCI_QUIRK_SINGLE_POWER_WRITE |
>  			  SDHCI_QUIRK_BROKEN_DMA,
> @@ -374,6 +407,14 @@ static const struct pci_device_id pci_ids[]
> __devinitdata = { },
>  
>  	{
> +		.vendor         = PCI_VENDOR_ID_RICOH,
> +		.device         = 0x843,
> +		.subvendor      = PCI_ANY_ID,
> +		.subdevice      = PCI_ANY_ID,
> +		.driver_data    = (kernel_ulong_t)&sdhci_ricoh_mmc,
> +	},
> +
> +	{
>  		.vendor		= PCI_VENDOR_ID_ENE,
>  		.device		= PCI_DEVICE_ID_ENE_CB712_SD,
>  		.subvendor	= PCI_ANY_ID,
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index c6d1bd8..483b78e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1687,7 +1687,8 @@ int sdhci_add_host(struct sdhci_host *host)
>  			host->version);
>  	}
>  
> -	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> +	caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
> host->caps :
> +		sdhci_readl(host, SDHCI_CAPABILITIES);
>  
>  	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
>  		host->flags |= SDHCI_USE_SDMA;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index c846813..b1839a3 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -240,6 +240,8 @@ struct sdhci_host {
>  #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
>  /* Controller cannot support End Attribute in NOP ADMA descriptor */
>  #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
> +/* Controller is missing device caps. Use caps provided by host */
> +#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
>  
>  	int			irq;		/* Device IRQ
> */ void __iomem *		ioaddr;		/* Mapped
> address */ @@ -292,6 +294,8 @@ struct sdhci_host {
>  
>  	struct timer_list	timer;		/* Timer for
> timeouts */ 
> +	unsigned int		caps;		/*
> Alternative capabilities */ +
>  	unsigned long		private[0]
> ____cacheline_aligned; };
>  

--phil

  parent reply	other threads:[~2010-06-13 16:06 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1275516180.30272.4.camel@maxim-laptop>
2010-06-03  1:16 ` [PATCH] mmc: make sdhci work with ricoh mmc controller Maxim Levitsky
2010-06-03 16:11   ` Philip Langdale
2010-06-03 16:31     ` Maxim Levitsky
2010-06-03 16:39       ` Philip Langdale
2010-06-03 17:05         ` Philip Langdale
2010-06-03 17:35           ` Maxim Levitsky
2010-06-04  4:42             ` Philip Langdale
2010-06-04 10:07               ` Maxim Levitsky
2010-06-04 15:05                 ` Philip Langdale
2010-06-04 15:33                   ` Maxim Levitsky
2010-06-06 21:24                     ` Maxim Levitsky
2010-06-06 21:28                       ` [PATCH 1/2] " Maxim Levitsky
2010-06-06 23:11                         ` Philip Langdale
2010-06-07  0:37                           ` Maxim Levitsky
2010-06-07  1:41                             ` Philip Langdale
2010-06-11 19:08                               ` [PATCH v3] " Maxim Levitsky
2010-06-11 19:15                                 ` [PATCH v4] " maximlevitsky
2010-06-13 11:29                                   ` Maxim Levitsky
2010-06-13 16:06                                   ` Philip Langdale [this message]
2010-06-06 21:28                       ` [PATCH 2/2] mmc: fix mmc card disappearence on resume on ricoh mmc controllers Maxim Levitsky
2010-06-06 23:22                         ` Philip Langdale
2010-06-08  8:57                           ` Maxim Levitsky
2010-06-06 23:23                         ` Chris Ball
2010-06-07  0:33                           ` Maxim Levitsky
2010-06-07  5:47                             ` Chris Ball
2010-06-08  8:52                               ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100613090611.18bcfe08@fido5 \
    --to=philipl@overt.org \
    --cc=adq_dvb@lidskialf.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=maximlevitsky@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).