From: Wolfram Sang <w.sang@pengutronix.de>
To: Olof Johansson <olof@lixom.net>
Cc: Chris Ball <cjb@laptop.org>,
linux-mmc@vger.kernel.org, linux-tegra@vger.kernel.org,
Yvonne Yip <y@palm.com>, Mike Rapoport <mike@compulab.co.il>
Subject: Re: [PATCH 3/3] mmc: add sdhci-tegra driver for Tegra SoCs
Date: Wed, 22 Dec 2010 17:22:31 +0100 [thread overview]
Message-ID: <20101222162231.GC30951@pengutronix.de> (raw)
In-Reply-To: <1293004871-1918-4-git-send-email-olof@lixom.net>
[-- Attachment #1: Type: text/plain, Size: 2538 bytes --]
Hi Olof,
looks good to me. Just some minor comments, but in general
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
On Wed, Dec 22, 2010 at 02:01:11AM -0600, Olof Johansson wrote:
> SDHCI driver for Tegra. Pretty straight forward, a few pieces of
> functionality left to fill in but nothing that stops it from going
> upstream. Board enablement submitted separately.
I'd think this can go below the "---" line?
...
> This driver plugs in as a new variant of sdhci-pltfm, using the platform
> data structure passed in to specify the GPIOs to use for card detect,
> write protect and card power enablement.
>
> Original driver (of which only the header file is left):
> Signed-off-by: Yvonne Yip <y@palm.com>
>
> The rest, which has been rewritten by now:
> Signed-off-by: Olof Johansson <olof@lixom.net>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Mike Rapoport <mike@compulab.co.il>
> +static unsigned int tegra_sdhci_get_ro(struct sdhci_host *sdhci)
> +{
> + struct platform_device *pdev = to_platform_device(mmc_dev(sdhci->mmc));
> + struct tegra_sdhci_platform_data *plat;
> +
> + plat = pdev->dev.platform_data;
> +
> + if (gpio_is_valid(plat->wp_gpio))
> + return gpio_get_value(plat->wp_gpio);
> +
> + return -1;
So, read_only is the default case? I would have gone for returning 0.
Well, safety vs. convenience...
...
> + if (rc) {
> + dev_err(mmc_dev(host->mmc),
Trailing white space
> + "failed to allocate power gpio\n");
> + goto out;
> + }
> + tegra_gpio_enable(plat->power_gpio);
> + gpio_direction_output(plat->power_gpio, 1);
> + }
> +
> + if (gpio_is_valid(plat->cd_gpio)) {
> + rc = gpio_request(plat->cd_gpio, "sdhci_cd");
> + if (rc) {
> + dev_err(mmc_dev(host->mmc),
ditto
> + "failed to allocate cd gpio\n");
> + goto out_power;
> + }
> + tegra_gpio_enable(plat->cd_gpio);
> +
> + rc = request_irq(gpio_to_irq(plat->cd_gpio), carddetect_irq,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + mmc_hostname(host->mmc), host);
> +
> + if (rc) {
> + dev_err(mmc_dev(host->mmc), "request irq error\n");
> + goto out_cd;
> + }
> +
> + }
> +
> + if (gpio_is_valid(plat->wp_gpio)) {
> + rc = gpio_request(plat->wp_gpio, "sdhci_wp");
> + if (rc) {
> + dev_err(mmc_dev(host->mmc),
ditto
Kind regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2010-12-22 16:22 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-22 8:01 [PATCH 0/3 v2] Add SDHCI driver for Tegra Olof Johansson
2010-12-22 8:01 ` [PATCH 1/3] sdhci: add quirk for max len ADMA descriptors Olof Johansson
2010-12-22 8:01 ` [PATCH 2/3] sdhci: don't finish commands in flight Olof Johansson
2010-12-22 8:08 ` Chris Ball
2010-12-22 9:38 ` Olof Johansson
2010-12-22 8:01 ` [PATCH 3/3] mmc: add sdhci-tegra driver for Tegra SoCs Olof Johansson
2010-12-22 16:22 ` Wolfram Sang [this message]
2010-12-22 19:22 ` Olof Johansson
2010-12-23 6:20 ` Mike Rapoport
2010-12-23 8:59 ` Olof Johansson
2010-12-22 8:06 ` [PATCH 0/3 v2] Add SDHCI driver for Tegra Chris Ball
2010-12-22 16:05 ` Wolfram Sang
2010-12-22 20:48 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101222162231.GC30951@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mike@compulab.co.il \
--cc=olof@lixom.net \
--cc=y@palm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox