From: Chris Ball <cjb@laptop.org>
To: Jaehoon Chung <jh80.chung@samsung.com>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
Kyungmin Park <kyungmin.park@samsung.com>,
Ben Dooks <ben-linux@fluff.org>
Subject: Re: [PATCH] sdhci-s3c: add platform_8bit_width()
Date: Wed, 12 Jan 2011 02:20:30 +0000 [thread overview]
Message-ID: <20110112022030.GA27414@void.printf.net> (raw)
In-Reply-To: <4D2CF631.4080402@samsung.com>
Hi Jaehoon,
Looks fine, just style corrections:
On Wed, Jan 12, 2011 at 09:30:41AM +0900, Jaehoon Chung wrote:
> This patch is added platform_8bit_width() function in sdhci-s3c.
^ adds
>
> We has 8-bit width support but is not a v3 controller.
^ have
> So we need platform_8bit_width() to support 8-bit buswidth.
>
> Also we need MMC_CAP_8_BIT_DATA, so we added them in platdata.
^ add it
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/mmc/host/sdhci-s3c.c | 32 ++++++++++++++++++++++++++++++++
> 1 files changed, 32 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 70cc3d7..4dc7d6d 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -276,10 +276,39 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
> host->clock = clock;
> }
>
> +/*
> + * sdhci_s3c_platform_8bit_width - support 8bit buswidth
> + *
> + * We has 8-bit width support but is not a v3 controller.
^ have
> + * So we add platform_8bit_width() and support 8bit width.
^ extra space here
> + **/
> +static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host,
> + int bus_width)
This will (just) fit on one line.
> +{
> + u8 ctrl;
> +
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> +
> + if (bus_width == MMC_BUS_WIDTH_8)
> + ctrl |= SDHCI_CTRL_8BITBUS;
> + else
> + ctrl &= ~SDHCI_CTRL_8BITBUS;
> +
> + if (bus_width == MMC_BUS_WIDTH_4)
> + ctrl |= SDHCI_CTRL_4BITBUS;
> + else
> + ctrl &= ~SDHCI_CTRL_4BITBUS;
You could use a switch statement here.
> +
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +
> + return 0;
> +}
> +
> static struct sdhci_ops sdhci_s3c_ops = {
> .get_max_clock = sdhci_s3c_get_max_clk,
> .set_clock = sdhci_s3c_set_clock,
> .get_min_clock = sdhci_s3c_get_min_clock,
> + .platform_8bit_width = sdhci_s3c_platform_8bit_width,
> };
>
> static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
> @@ -472,6 +501,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
> if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
> host->mmc->caps = MMC_CAP_NONREMOVABLE;
>
> + if (pdata->host_caps)
> + host->mmc->caps |= pdata->host_caps;
> +
> host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
> SDHCI_QUIRK_32BIT_DMA_SIZE);
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
next prev parent reply other threads:[~2011-01-12 2:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-12 0:30 [PATCH] sdhci-s3c: add platform_8bit_width() Jaehoon Chung
2011-01-12 2:20 ` Chris Ball [this message]
2011-01-12 2:59 ` Jaehoon Chung
2011-01-12 3:27 ` Chris Ball
2011-01-12 3:54 ` Kyungmin Park
2011-01-12 3:58 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110112022030.GA27414@void.printf.net \
--to=cjb@laptop.org \
--cc=ben-linux@fluff.org \
--cc=jh80.chung@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox