Re: [PATCH 3/3] eSDHC: fix incorrect default value of the capabilities register on P4080

[Anton Vorontsov <avorontsov@mvista.com>]

On Tue, Jul 05, 2011 at 12:19:03PM +0800, Roy Zang wrote:
> P4080 eSDHC errata 12 describes incorrect default value of the
> the host controller capabilities register.
> 
> The default value of the VS18 and VS30 fields in the host controller
> capabilities register (HOSTCAPBLT) are incorrect. The default of these bits
> should be zero instead of one in the eSDHC logic.
> 
> This patch adds the workaround for these errata.
> 
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> ---
>  drivers/mmc/host/sdhci-of-core.c |    3 +++
>  drivers/mmc/host/sdhci.c         |    6 ++++++
>  include/linux/mmc/sdhci.h        |    4 ++++
>  3 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c
> index fede43d..9bdd30d 100644
> --- a/drivers/mmc/host/sdhci-of-core.c
> +++ b/drivers/mmc/host/sdhci-of-core.c
> @@ -182,6 +182,9 @@ static int __devinit sdhci_of_probe(struct platform_device *ofdev)
>  	if (of_device_is_compatible(np, "fsl,esdhc"))
>  		host->quirks |= SDHCI_QUIRK_QORIQ_PROCTL_WEIRD;
>  
> +	if (of_device_is_compatible(np, "fsl,p4080-esdhc"))
> +		host->quirks |= SDHCI_QUIRK_QORIQ_HOSTCAPBLT_ONLY_VS33;

Should really use voltage-ranges, not quirks.

http://www.spinics.net/lists/linux-mmc/msg02785.html

Thanks,

-- 
Anton Vorontsov
Email: cbouatmailru@gmail.com