Re: [PATCH 0/4 v8] mmc: tmio, sdhi: provide multiple irq handlers

Simon Horman
2011-08-30T06:21:51Z

On Sun, Aug 28, 2011 at 01:58:54PM -0400, Chris Ball wrote:
> Hi Simon,
>
> On Wed, Aug 24 2011, Simon Horman wrote:
> > The SDHI driver already supports making use of up to three interrupt
> > sources.
> >
> > This series breaks up the existing interrupt handler into three handlers,
> > one for sdcard access, one for card detect and one for SDIO interrupts.
> > A cover-all handler, which makes use of these new broken-out handlers
> > is provided for for the case where there is a multiplexed interrupt source.
> >
> > This series also wires up the new IRQ handlers for the mackerel and ag4evm.
> >
> > This series contains the following patches:
> >
> > [PATCH v8 1/4] mmc: tmio: Cache interrupt masks
> > [PATCH v8 2/4] mmc: tmio: Provide separate interrupt handlers
> > [PATCH v8 3/4] mmc: sdhi: Allow name IRQs to use specific handlers
> > [PATCH v8 4/4] ARM: shmobile: ag5evm, ap4: Named SDHI IRQ sources
>
> Thanks, all applied to mmc-next for 3.2, using Guennadi's v9 for 3/4.

Thanks.

I (finally) have SDIO hardware available for testing
and I have verified that the current mmc-next tree
works with a b43-based SDIO wirless network card
(iwscan list shows the available access point).