public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <cbouatmailru@gmail.com>
To: B42677@freescale.com
Cc: linux-mmc@vger.kernel.org,
	Haijun Zhang <Haijun.Zhang@freescale.com>,
	Jerry Huang <Chang-Ming.Huang@freescale.com>
Subject: Re: [PATCH V2] Powerpc eSDHC Recover from the ADMA error
Date: Tue, 18 Sep 2012 23:08:48 -0700	[thread overview]
Message-ID: <20120919060848.GA25261@lizard> (raw)
In-Reply-To: <1348031113-19583-1-git-send-email-B42677@freescale.com>

On Wed, Sep 19, 2012 at 01:05:13PM +0800, B42677@freescale.com wrote:
> From: Haijun Zhang <Haijun.Zhang@freescale.com>
> 
> A-003500: False ADMA Error might be reported when ADMA is used for
> multiple block read command with Stop at Block Gap. If PROCTL[SABGREQ]
> is set when the particular block's data is received by the System side
> logic before entire block(with CRC) data is received by the SD side logic,
> and also if ADMA descriptor line is fetched at the same time,
> then DMA engine might report false ADMA error. eSDHC might not be able
> to Continue(PROCTL[CREQ]=1)after Stop at Block Gap.
> This issue will impact the eSDHC IP VVN2.3.
> 
> 
> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> CC: Anton Vorontsov <cbouatmailru@gmail.com>
> ---
> changes for v2:
> 	- Invert the condition of the if statement in function workground

Hm.

[...]
> +static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
> +{
> +	u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
> +
> +	tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
> +	if ((intmask & SDHCI_INT_DATA_END) &&
> +		(intmask & SDHCI_INT_BLK_GAP) &&
> +		(tmp == VENDOR_V_23)) {

I really don't see it inverted. :-)

What I meant was this:

static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
{
	u32 vendor;
	bool applicable;
	dma_addr_t dmastart;
	dma_addr_t dmanow;

	vendor = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
	vendor = (vendor & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;

	applicable = intmask & SDHCI_INT_DATA_END &&
		     intmask & SDHCI_INT_BLK_GAP &&
		     vendor == VENDOR_V_23;
	if (!applicable)
		return;

	host->data->error = 0;
	dmastart = sg_dma_address(host->data->sg);
	dmanow = dmastart + host->data->bytes_xfered;
	...
	...
}

This is human-readable and there's no additional indentation.

Thanks,

Anton.

  reply	other threads:[~2012-09-19  6:11 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-19  5:05 [PATCH V2] Powerpc eSDHC Recover from the ADMA error B42677
2012-09-19  6:08 ` Anton Vorontsov [this message]
2012-09-19  9:52   ` Zhang Haijun-B42677

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120919060848.GA25261@lizard \
    --to=cbouatmailru@gmail.com \
    --cc=B42677@freescale.com \
    --cc=Chang-Ming.Huang@freescale.com \
    --cc=Haijun.Zhang@freescale.com \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox