From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sascha Hauer Subject: Re: [PATCH 1/3] mmc: add support for power-on sequencing through DT Date: Tue, 21 Jan 2014 08:25:51 +0100 Message-ID: <20140121072550.GU16215@pengutronix.de> References: <1390190215-22700-1-git-send-email-olof@lixom.net> <1390190215-22700-2-git-send-email-olof@lixom.net> <20140121072447.GC19940@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from metis.ext.pengutronix.de ([92.198.50.35]:55241 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750809AbaAUHZw (ORCPT ); Tue, 21 Jan 2014 02:25:52 -0500 Content-Disposition: inline In-Reply-To: <20140121072447.GC19940@pengutronix.de> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Olof Johansson Cc: linux-mmc@vger.kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux@arm.linux.org.uk, pawel.moll@arm.com, chris@printf.net, robh+dt@kernel.org, ijc+devicetree@hellion.org.ok, galak@codeaurora.org, linux-arm-kernel@lists.infradead.org On Tue, Jan 21, 2014 at 08:24:47AM +0100, Sascha Hauer wrote: > On Sun, Jan 19, 2014 at 07:56:53PM -0800, Olof Johansson wrote: > > +Card power and reset control: > > +The following properties can be specified for cases where the MMC > > +peripheral needs additional reset, regulator and clock lines. It is for > > +example common for WiFi/BT adapters to have these separate from the main > > +MMC bus: > > + - card-reset-gpios: Specify GPIOs for card reset (reset active low) > > We have GPIO_ACTIVE_LOW/HIGH. No need to hardcode this. Fabio already spotted that. Sorry for the noise. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |