* [PATCH] mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback
@ 2014-07-15 9:28 Chuanxiao Dong
2014-07-26 9:24 ` Ulf Hansson
0 siblings, 1 reply; 2+ messages in thread
From: Chuanxiao Dong @ 2014-07-15 9:28 UTC (permalink / raw)
To: linux-mmc
It is not required (in fact it even is not recommended) that a PCI
driver's suspend() callback save the standard configuration registers
of the device, prepare it for waking up the system, or put it into a
low-power state. All of these operations can very well be taken
care of by the PCI subsystem, without the driver's participation. Thus
remove these PCI functions.
For the device which has wake up capability, use device_init_wakeup to
init the wake up capability so that PCI core will help to enable the wakeup
for it.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 52c42fc..e536526 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -1130,18 +1130,13 @@ static int sdhci_pci_suspend(struct device *dev)
goto err_pci_suspend;
}
- pci_save_state(pdev);
if (pm_flags & MMC_PM_KEEP_POWER) {
- if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
- pci_pme_active(pdev, true);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- }
- pci_set_power_state(pdev, PCI_D3hot);
- } else {
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
- }
+ if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+ device_init_wakeup(dev, true);
+ else
+ device_init_wakeup(dev, false);
+ } else
+ device_init_wakeup(dev, false);
return 0;
@@ -1162,12 +1157,6 @@ static int sdhci_pci_resume(struct device *dev)
if (!chip)
return 0;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- ret = pci_enable_device(pdev);
- if (ret)
- return ret;
-
if (chip->fixes && chip->fixes->resume) {
ret = chip->fixes->resume(chip);
if (ret)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback
2014-07-15 9:28 [PATCH] mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback Chuanxiao Dong
@ 2014-07-26 9:24 ` Ulf Hansson
0 siblings, 0 replies; 2+ messages in thread
From: Ulf Hansson @ 2014-07-26 9:24 UTC (permalink / raw)
To: Chuanxiao Dong; +Cc: linux-mmc
On 15 July 2014 11:28, Chuanxiao Dong <chuanxiao.dong@intel.com> wrote:
> It is not required (in fact it even is not recommended) that a PCI
> driver's suspend() callback save the standard configuration registers
> of the device, prepare it for waking up the system, or put it into a
> low-power state. All of these operations can very well be taken
> care of by the PCI subsystem, without the driver's participation. Thus
> remove these PCI functions.
>
> For the device which has wake up capability, use device_init_wakeup to
> init the wake up capability so that PCI core will help to enable the wakeup
> for it.
>
> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Thanks! Applied for next.
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-pci.c | 23 ++++++-----------------
> 1 file changed, 6 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
> index 52c42fc..e536526 100644
> --- a/drivers/mmc/host/sdhci-pci.c
> +++ b/drivers/mmc/host/sdhci-pci.c
> @@ -1130,18 +1130,13 @@ static int sdhci_pci_suspend(struct device *dev)
> goto err_pci_suspend;
> }
>
> - pci_save_state(pdev);
> if (pm_flags & MMC_PM_KEEP_POWER) {
> - if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
> - pci_pme_active(pdev, true);
> - pci_enable_wake(pdev, PCI_D3hot, 1);
> - }
> - pci_set_power_state(pdev, PCI_D3hot);
> - } else {
> - pci_enable_wake(pdev, PCI_D3hot, 0);
> - pci_disable_device(pdev);
> - pci_set_power_state(pdev, PCI_D3hot);
> - }
> + if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
> + device_init_wakeup(dev, true);
> + else
> + device_init_wakeup(dev, false);
> + } else
> + device_init_wakeup(dev, false);
>
> return 0;
>
> @@ -1162,12 +1157,6 @@ static int sdhci_pci_resume(struct device *dev)
> if (!chip)
> return 0;
>
> - pci_set_power_state(pdev, PCI_D0);
> - pci_restore_state(pdev);
> - ret = pci_enable_device(pdev);
> - if (ret)
> - return ret;
> -
> if (chip->fixes && chip->fixes->resume) {
> ret = chip->fixes->resume(chip);
> if (ret)
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-07-26 9:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-15 9:28 [PATCH] mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback Chuanxiao Dong
2014-07-26 9:24 ` Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).