[PATCH 2/2] mmc: core: reset sdio card properly on resume.

[NeilBrown <neilb@suse.de>]

mmc_sdio_power_restore() calls
	mmc_send_if_cond(host, host->card->ocr);

	ret = mmc_send_io_op_cond(host, 0, NULL);

between mmc_go_idle() and mmc_sdio_init_card().
mmc_sdio_resume() needs to as well, else my libertas sdio wifi
device doesn't resume properly from suspend.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/mmc/core/sdio.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 3c0f07961fab..da927c61bf47 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -981,8 +981,12 @@ static int mmc_sdio_resume(struct mmc_host *host)
 	if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
 		sdio_reset(host);
 		mmc_go_idle(host);
-		err = mmc_sdio_init_card(host, host->card->ocr, host->card,
-					mmc_card_keep_power(host));
+		mmc_send_if_cond(host, host->card->ocr);
+		err = mmc_send_io_op_cond(host, 0, NULL);
+		if (!err)
+			err = mmc_sdio_init_card(host, host->card->ocr,
+						 host->card,
+						 mmc_card_keep_power(host));
 	} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		/* We may have switched to 1-bit mode during suspend */
 		err = sdio_enable_4bit_bus(host->card);