* re: mmc: mediatek: add HS400 support
@ 2016-04-02 8:46 Dan Carpenter
0 siblings, 0 replies; 2+ messages in thread
From: Dan Carpenter @ 2016-04-02 8:46 UTC (permalink / raw)
Cc: Chaotian Jing, linux-mmc
Hello Chaotian Jing,
The patch 6397b7f5f405: "mmc: mediatek: add HS400 support" from Oct
27, 2015, leads to the following static checker warning:
drivers/mmc/host/mtk-sd.c:1320 msdc_tune_response()
error: uninitialized variable 'cmd_err'.
drivers/mmc/host/mtk-sd.c
1306 static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
1307 {
1308 struct msdc_host *host = mmc_priv(mmc);
1309 u32 rise_delay = 0, fall_delay = 0;
1310 struct msdc_delay_phase final_rise_delay, final_fall_delay;
1311 u8 final_delay, final_maxlen;
1312 int cmd_err;
^^^^^^^
1313 int i;
1314
1315 sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
1316 for (i = 0 ; i < PAD_DELAY_MAX; i++) {
1317 sdr_set_field(host->base + MSDC_PAD_TUNE,
1318 MSDC_PAD_TUNE_CMDRDLY, i);
1319 mmc_send_tuning(mmc, opcode, &cmd_err);
^^^^^^^
No error handling.
1320 if (!cmd_err)
^^^^^^^
1321 rise_delay |= (1 << i);
1322 }
regards,
dan carpenter
^ permalink raw reply [flat|nested] 2+ messages in thread* re: mmc: mediatek: add HS400 support
@ 2016-03-10 21:19 Dan Carpenter
0 siblings, 0 replies; 2+ messages in thread
From: Dan Carpenter @ 2016-03-10 21:19 UTC (permalink / raw)
To: chaotian.jing; +Cc: linux-mmc
Hello Chaotian Jing,
The patch 6397b7f5f405: "mmc: mediatek: add HS400 support" from Oct
27, 2015, leads to the following static checker warning:
drivers/mmc/host/mtk-sd.c:1320 msdc_tune_response()
error: XXX potentially using uninitialized 'cmd_err'.
drivers/mmc/host/mtk-sd.c
1306 static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
1307 {
1308 struct msdc_host *host = mmc_priv(mmc);
1309 u32 rise_delay = 0, fall_delay = 0;
1310 struct msdc_delay_phase final_rise_delay, final_fall_delay;
1311 u8 final_delay, final_maxlen;
1312 int cmd_err;
^^^^^^^
1313 int i;
1314
1315 sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
1316 for (i = 0 ; i < PAD_DELAY_MAX; i++) {
1317 sdr_set_field(host->base + MSDC_PAD_TUNE,
1318 MSDC_PAD_TUNE_CMDRDLY, i);
1319 mmc_send_tuning(mmc, opcode, &cmd_err);
^^^^^^^^
If kmalloc fails then it's not initialized.
1320 if (!cmd_err)
^^^^^^^
1321 rise_delay |= (1 << i);
1322 }
regards,
dan carpenter
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-04-02 8:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-02 8:46 mmc: mediatek: add HS400 support Dan Carpenter
-- strict thread matches above, loose matches on Subject: below --
2016-03-10 21:19 Dan Carpenter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox