From: Jungseung Lee <js07.lee@samsung.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
linux-mmc@vger.kernel.org, js07.lee@gmail.com
Cc: Jungseung Lee <js07.lee@samsung.com>
Subject: [PATCH] mmc: core: Export device lifetime information through sysfs
Date: Thu, 08 Dec 2016 19:40:28 +0900 [thread overview]
Message-ID: <20161208104028.11816-1-js07.lee@samsung.com> (raw)
In-Reply-To: CGME20161208104055eucas1p1dfc3b9f17f136aa8d099875938722707@eucas1p1.samsung.com
In the eMMC 5.0 version of the spec, several EXT_CSD fields
about device lifetime are added.
Two type of estimated indications reflected by averaged wear out of memory
An indication reflected by average reserved blocks
Export the information through sysfs.
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
---
drivers/mmc/core/mmc.c | 12 ++++++++++++
include/linux/mmc/card.h | 3 +++
include/linux/mmc/mmc.h | 3 +++
3 files changed, 18 insertions(+)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index df19777..37589eb 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -617,6 +617,12 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->ext_csd.ffu_capable =
(ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
!(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
+
+ card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
+ card->ext_csd.device_life_time_est_typ_a =
+ ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A];
+ card->ext_csd.device_life_time_est_typ_b =
+ ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B];
}
out:
return err;
@@ -746,6 +752,10 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
+MMC_DEV_ATTR(pre_eol_info, "%02x\n", card->ext_csd.pre_eol_info);
+MMC_DEV_ATTR(life_time, "0x%02x 0x%02x\n",
+ card->ext_csd.device_life_time_est_typ_a,
+ card->ext_csd.device_life_time_est_typ_b);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
card->ext_csd.enhanced_area_offset);
@@ -799,6 +809,8 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_name.attr,
&dev_attr_oemid.attr,
&dev_attr_prv.attr,
+ &dev_attr_pre_eol_info.attr,
+ &dev_attr_life_time.attr,
&dev_attr_serial.attr,
&dev_attr_enhanced_area_offset.attr,
&dev_attr_enhanced_area_size.attr,
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 73fad83..510a73a 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -119,6 +119,9 @@ struct mmc_ext_csd {
u8 raw_pwr_cl_ddr_200_360; /* 253 */
u8 raw_bkops_status; /* 246 */
u8 raw_sectors[4]; /* 212 - 4 bytes */
+ u8 pre_eol_info; /* 267 */
+ u8 device_life_time_est_typ_a; /* 268 */
+ u8 device_life_time_est_typ_b; /* 269 */
unsigned int feature_support;
#define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index c376209..a034d07 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -331,6 +331,9 @@ struct _mmc_csd {
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
+#define EXT_CSD_PRE_EOL_INFO 267 /* RO */
+#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A 268 /* RO */
+#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B 269 /* RO */
#define EXT_CSD_SUPPORTED_MODE 493 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
--
2.10.1
next parent reply other threads:[~2016-12-08 10:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20161208104055eucas1p1dfc3b9f17f136aa8d099875938722707@eucas1p1.samsung.com>
2016-12-08 10:40 ` Jungseung Lee [this message]
2016-12-09 0:23 ` [PATCH] mmc: core: Export device lifetime information through sysfs Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161208104028.11816-1-js07.lee@samsung.com \
--to=js07.lee@samsung.com \
--cc=adrian.hunter@intel.com \
--cc=js07.lee@gmail.com \
--cc=linux-mmc@vger.kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox