From: Hans de Goede <hdegoede@redhat.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
linux-mmc@vger.kernel.org, Dong Aisheng <b29396@freescale.com>
Subject: [PATCH v2 2/2] mmc: sdhci: intel: Disable runtime pm when the sdio_irq is enabled.
Date: Wed, 15 Mar 2017 17:31:45 +0100 [thread overview]
Message-ID: <20170315163145.15475-2-hdegoede@redhat.com> (raw)
In-Reply-To: <20170315163145.15475-1-hdegoede@redhat.com>
SDIO cards may need clock to send the card interrupt to the host.
On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch
pinging the tablet results in:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms
Where as with this patch I get:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms
Cc: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-New patch replacing "mmc: sdhci: sdio-intel: Set
SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk"
---
drivers/mmc/host/sdhci-acpi.c | 1 +
drivers/mmc/host/sdhci-pci-core.c | 1 +
drivers/mmc/host/sdhci.c | 6 ++++++
drivers/mmc/host/sdhci.h | 2 ++
4 files changed, 10 insertions(+)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 237f318..53b431a 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -288,6 +288,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
+ SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
MMC_CAP_WAIT_WHILE_BUSY,
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 982b3e3..a3b242e 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -498,6 +498,7 @@ static const struct sdhci_pci_fixes sdhci_ni_byt_sdio = {
static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
+ SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
.probe_slot = byt_sdio_probe_slot,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6fdd7a7..59c5cad 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1828,6 +1828,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
+ if ((host->quirks2 & SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM) && enable)
+ pm_runtime_get(host->mmc->parent);
+
spin_lock_irqsave(&host->lock, flags);
if (enable)
host->flags |= SDHCI_SDIO_IRQ_ENABLED;
@@ -1836,6 +1839,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
sdhci_enable_sdio_irq_nolock(host, enable);
spin_unlock_irqrestore(&host->lock, flags);
+
+ if ((host->quirks2 & SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM) && !enable)
+ pm_runtime_put(host->mmc->parent);
}
static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index edf3adf..b72c38d 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -427,6 +427,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
/* Broken Clock divider zero in controller */
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
+/* Must not runtime suspend when sdio_irq is enabled */
+#define SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM (1<<16)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.9.3
next prev parent reply other threads:[~2017-03-15 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-15 16:31 [PATCH v2 1/2] mmc: sdhci-acpi: Sync quirks with sdhci_intel_byt_* from sdhci-pci-core.c Hans de Goede
2017-03-15 16:31 ` Hans de Goede [this message]
2017-03-21 10:00 ` [PATCH v2 2/2] mmc: sdhci: intel: Disable runtime pm when the sdio_irq is enabled Ulf Hansson
2017-03-21 12:34 ` Adrian Hunter
2017-03-21 13:30 ` Hans de Goede
2017-03-21 14:54 ` Ulf Hansson
2017-03-22 12:06 ` Adrian Hunter
2017-03-22 14:00 ` Ulf Hansson
2017-03-22 14:29 ` Adrian Hunter
2017-03-30 6:13 ` Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170315163145.15475-2-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=adrian.hunter@intel.com \
--cc=b29396@freescale.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox