public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tony Lindgren <tony@atomide.com>,
	Rob Herring <robh+dt@kernel.org>,
	nsekhar@ti.com
Cc: Russell King <linux@armlinux.org.uk>,
	linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	kishon@ti.com, Ravikumar Kattekola <rk@ti.com>
Subject: [PATCH 1/7] ARM: dts: dra72-evm-common: Correct vmmc-supply for mmc2
Date: Thu, 1 Jun 2017 20:03:55 +0530	[thread overview]
Message-ID: <20170601143401.16852-2-kishon@ti.com> (raw)
In-Reply-To: <20170601143401.16852-1-kishon@ti.com>

On dra72/dra71 evms, mmc2 vdd/ios are connected to a common 1.8V supply
not 3.3V. Also the regulator that supplies 1.8V is different on dra71-evm
so move the supply property from common dtsi to evm specific dts files.

Fixes: a4240d3af677 ("ARM: dts: Add support for dra72-evm rev C (SR2.0)")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra71-evm.dts         | 14 ++++++++++++++
 arch/arm/boot/dts/dra72-evm-common.dtsi |  2 --
 arch/arm/boot/dts/dra72-evm-revc.dts    | 14 ++++++++++++++
 arch/arm/boot/dts/dra72-evm.dts         | 14 ++++++++++++++
 4 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 4d57a55473af..c7a56b6263a6 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -32,6 +32,16 @@
 			  3000000 0x1>;
 	};
 
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&lp8732_buck0_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	poweroff: gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -165,6 +175,10 @@
 	vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
 };
 
+&mmc2 {
+	vmmc-supply = <&evm_1v8_sw>;
+};
+
 &mac {
 	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
 		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index ad24544adf0f..d97370217eff 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -418,8 +418,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&evm_3v3_sw>;
 	bus-width = <8>;
 	ti,non-removable;
 	max-frequency = <192000000>;
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 3ecac56bf504..47dcd527ec58 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -15,6 +15,16 @@
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &i2c1 {
@@ -82,3 +92,7 @@
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
+
+&mmc2 {
+	vmmc-supply = <&evm_1v8_sw>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index cd9c4ff12654..adbcc570eba9 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -13,6 +13,16 @@
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &i2c1 {
@@ -43,3 +53,7 @@
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };
+
+&mmc2 {
+	vmmc-supply = <&evm_1v8_sw>;
+};
-- 
2.11.0


  reply	other threads:[~2017-06-01 14:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-01 14:33 [PATCH 0/7] dra7: Fixes for MMC devicetree node Kishon Vijay Abraham I
2017-06-01 14:33 ` Kishon Vijay Abraham I [this message]
2017-06-01 14:33 ` [PATCH 2/7] ARM: dts: dra72-evm: Add vmmc_aux supply to mmc1 Kishon Vijay Abraham I
2017-06-01 14:33 ` [PATCH 3/7] ARM: dts: dra72-evm-revc: " Kishon Vijay Abraham I
2017-06-01 14:33 ` [PATCH 4/7] ARM: dts: am57xx-beagle-x15-revb1: Fix supply name used for MMC1 IO lines Kishon Vijay Abraham I
2017-06-01 14:33 ` [PATCH 5/7] ARM: dts: dra7-evm: Correct the vmmc-supply for mmc2 Kishon Vijay Abraham I
     [not found] ` <20170601143401.16852-1-kishon-l0cyMroinI0@public.gmane.org>
2017-06-01 14:34   ` [PATCH 6/7] ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes Kishon Vijay Abraham I
2017-06-01 14:34 ` [PATCH 7/7] ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM Kishon Vijay Abraham I
2017-06-02 10:50 ` [PATCH 0/7] dra7: Fixes for MMC devicetree node Ulf Hansson
2017-06-06  4:17   ` Kishon Vijay Abraham I
2017-06-06 10:36     ` Kishon Vijay Abraham I
     [not found]       ` <1d15c9e9-f257-fd97-a9a2-055ee90d7e84-l0cyMroinI0@public.gmane.org>
2017-06-06 10:51         ` Tony Lindgren
2017-06-06 11:57           ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170601143401.16852-2-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=nsekhar@ti.com \
    --cc=rk@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox