public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@marvell.com>
To: Zhoujie Wu <zjwu@marvell.com>
Cc: ulf.hansson@linaro.org, adrian.hunter@intel.com,
	linux-mmc@vger.kernel.org, zmxu@marvell.com, nadavh@marvell.com,
	xigu@marvell.com, dingwei@marvell.com, kostap@marvell.com,
	hannah@marvell.com, hongd@marvell.com, dougj@marvell.com,
	ygao@marvell.com, liuw@marvell.com
Subject: Re: [PATCH] mmc: sdhci-xenon: Add Xenon SDHCI specific system-level PM support
Date: Tue, 11 Jul 2017 10:15:31 +0800	[thread overview]
Message-ID: <20170711101531.0212baef@xhacker> (raw)
In-Reply-To: <1499451072-16513-1-git-send-email-zjwu@marvell.com>

Hi Zhoujie,

On Fri, 7 Jul 2017 11:11:12 -0700 Zhoujie Wu wrote:

> Add Xenon specific system-level suspend and resume support.
> Especially during resume, re-configure Xenon specific registers
> since registers setting will be lost in suspend if Xenon is power off.

This email shows you are the author of this patch. However,
IIRC, "Hu Ziji <huziji@marvell.com>" is the author of this patch, you are
just the committer. We'd better be honest.

> 

Hu Ziji has given his Signed off, why do you remove it?

PS: We'd better send patch after 4.13-rc1 is released.

Thanks

> Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
> Tested-by: Jisheng Zhang <jszhang@marvell.com>
> ---
>  drivers/mmc/host/sdhci-xenon.c | 42 +++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index bc1781b..9f399c4 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -519,6 +519,46 @@ static int xenon_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_PM_SLEEP
> +static int xenon_suspend(struct device *dev)
> +{
> +	struct sdhci_host *host = dev_get_drvdata(dev);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	int ret;
> +
> +	ret = sdhci_suspend_host(host);
> +	if (ret)
> +		return ret;
> +
> +	clk_disable_unprepare(pltfm_host->clk);
> +	return ret;
> +}
> +
> +static int xenon_resume(struct device *dev)
> +{
> +	struct sdhci_host *host = dev_get_drvdata(dev);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	int ret;
> +
> +	ret = clk_prepare_enable(pltfm_host->clk);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * If SoCs power off the entire Xenon, registers setting will
> +	 * be lost.
> +	 * Re-configure Xenon specific register to enable current SDHC
> +	 */
> +	ret = xenon_sdhc_prepare(host);
> +	if (ret)
> +		return ret;
> +
> +	return sdhci_resume_host(host);
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(xenon_pmops, xenon_suspend, xenon_resume);
> +
>  static const struct of_device_id sdhci_xenon_dt_ids[] = {
>  	{ .compatible = "marvell,armada-ap806-sdhci",},
>  	{ .compatible = "marvell,armada-cp110-sdhci",},
> @@ -531,7 +571,7 @@ static int xenon_remove(struct platform_device *pdev)
>  	.driver	= {
>  		.name	= "xenon-sdhci",
>  		.of_match_table = sdhci_xenon_dt_ids,
> -		.pm = &sdhci_pltfm_pmops,
> +		.pm = &xenon_pmops,
>  	},
>  	.probe	= xenon_probe,
>  	.remove	= xenon_remove,


      reply	other threads:[~2017-07-11  2:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-07 18:11 [PATCH] mmc: sdhci-xenon: Add Xenon SDHCI specific system-level PM support Zhoujie Wu
2017-07-11  2:15 ` Jisheng Zhang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170711101531.0212baef@xhacker \
    --to=jszhang@marvell.com \
    --cc=adrian.hunter@intel.com \
    --cc=dingwei@marvell.com \
    --cc=dougj@marvell.com \
    --cc=hannah@marvell.com \
    --cc=hongd@marvell.com \
    --cc=kostap@marvell.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=liuw@marvell.com \
    --cc=nadavh@marvell.com \
    --cc=ulf.hansson@linaro.org \
    --cc=xigu@marvell.com \
    --cc=ygao@marvell.com \
    --cc=zjwu@marvell.com \
    --cc=zmxu@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox