Re: [PATCH] mmc: sdhci-xenon: add set_power callback

[Jisheng Zhang <jszhang@marvell.com>]

On Fri, 18 Aug 2017 13:48:04 -0700 Zhoujie Wu wrote:

> Xenon sdh controller requests proper SD bus voltage select
> bits programmed even with vmmc power supply. Any reserved
> value(100b-000b) programmed in this field will lead to controller
> ignore SD bus power bit and keep its value at zero.
> Add set_power callback to handle this.
> 
> Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
> ---
>  drivers/mmc/host/sdhci-xenon.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index edd4d915..e82dc01 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -210,8 +210,28 @@ static void xenon_set_uhs_signaling(struct sdhci_host *host,
>  	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
>  }
>  
> +

remove this extra blank line.

> +static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
> +		unsigned short vdd)
> +{
> +	struct mmc_host *mmc = host->mmc;
> +	u8 pwr = host->pwr;
> +
> +	sdhci_set_power_noreg(host, mode, vdd);
> +
> +	if (host->pwr == pwr)
> +		return;
> +
> +	if (host->pwr == 0)
> +		vdd = 0;
> +
> +	if (!IS_ERR(mmc->supply.vmmc))
> +		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> +}
> +
>  static const struct sdhci_ops sdhci_xenon_ops = {
>  	.set_clock		= sdhci_set_clock,
> +	.set_power		= xenon_set_power,
>  	.set_bus_width		= sdhci_set_bus_width,
>  	.reset			= xenon_reset,
>  	.set_uhs_signaling	= xenon_set_uhs_signaling,