[PATCH V7 2/5] mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz

["ernest.zhang" <ernest.zhang@bayhubtech.com>]

O2 SD Host HS200 mode clock frequency current is 208MHz, should be changed
to 200MHz to meet specification.

Signed-off-by: ernest.zhang <ernest.zhang@bayhubtech.com>
---
Change in V7:
	Change HS200 mode clock frequency from 208MHz to 200MHz to meet
	Specification.

Change in V1~V6:
	N/A
---
 drivers/mmc/host/sdhci-pci-o2micro.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index ba59db6a126c..94cf3cd75dd3 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -311,7 +311,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 
 			/* Check Whether subId is 0x11 or 0x12 */
 			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
-				scratch_32 = 0x2c280000;
+				scratch_32 = 0x25100000;
 
 				/* Set Base Clock to 208MZ */
 				o2_pci_set_baseclk(chip, scratch_32);
@@ -406,7 +406,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 					       O2_SD_PLL_SETTING, scratch_32);
 		} else {
 			scratch_32 &= 0x0000FFFF;
-			scratch_32 |= 0x2c280000;
+			scratch_32 |= 0x25100000;
 
 			pci_write_config_dword(chip->pdev,
 					       O2_SD_PLL_SETTING, scratch_32);
-- 
2.17.1