From: "Du, Alek" <alek.du@intel.com>
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mmc@vger.kernel.org, ulf.hansson@linaro.org,
linux-kernel@vger.kernel.org
Subject: [PATCH V3] sdhci: fix the timeout check window for clock and reset
Date: Wed, 5 Dec 2018 11:14:50 +0800 [thread overview]
Message-ID: <20181205111450.300e0478@xdu1-mobl> (raw)
In-Reply-To: <229dc468-1155-b81f-9fda-b71402387e3f@intel.com>
>From bcb38577961823b4f8f2cc0aec7dd450a81b6ddc Mon Sep 17 00:00:00 2001
From: Alek Du <alek.du@intel.com>
Date: Fri, 30 Nov 2018 14:02:28 +0800
Subject: [PATCH] sdhci: fix the timeout check window for clock and reset
We observed some premature timeouts on a virtualization platform, the log
is like this:
case 1:
[159525.255629] mmc1: Internal clock never stabilised.
[159525.255818] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[159525.256049] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
...
[159525.257205] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03
>From the clock control register dump, we are pretty sure the clock was
stablized.
case 2:
[ 914.550127] mmc1: Reset 0x2 never completed.
[ 914.550321] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 914.550608] mmc1: sdhci: Sys addr: 0x00000010 | Version: 0x00001002
After checking the sdhci code, we found the timeout check actually has a
little window that the CPU can be scheduled out and when it comes back,
the original time set or check is not valid.
Fixes: 5a436cc0af62 ("mmc: sdhci: Optimize delay loops")
Signed-off-by: Alek Du <alek.du@intel.com>
Cc: stable@vger.kernel.org # v4.12+
---
drivers/mmc/host/sdhci.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 99bdae53fa2e..451b08a818a9 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -216,8 +216,12 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
timeout = ktime_add_ms(ktime_get(), 100);
/* hw clears the bit when it's done */
- while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
- if (ktime_after(ktime_get(), timeout)) {
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
+ break;
+ if (timedout) {
pr_err("%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
sdhci_dumpregs(host);
@@ -1608,9 +1612,13 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
- while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
- & SDHCI_CLOCK_INT_STABLE)) {
- if (ktime_after(ktime_get(), timeout)) {
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (clk & SDHCI_CLOCK_INT_STABLE)
+ break;
+ if (timedout) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
--
2.17.1
next prev parent reply other threads:[~2018-12-05 3:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-30 7:00 [PATCH] sdhci: fix the fake timeout bug Du, Alek
2018-11-30 9:19 ` Adrian Hunter
2018-11-30 14:13 ` Du, Alek
2018-11-30 14:40 ` Adrian Hunter
2018-12-01 5:42 ` Du, Alek
2018-12-04 1:01 ` [PATCH V2] sdhci: fix the timeout check window for clock and reset Du, Alek
2018-12-04 12:24 ` Adrian Hunter
2018-12-05 3:14 ` Du, Alek [this message]
2018-12-05 11:16 ` [PATCH V3] " Adrian Hunter
2018-12-05 14:20 ` Ulf Hansson
2018-12-05 23:33 ` [PATCH V3 rebase] mmc: " Du, Alek
2018-12-06 7:55 ` Ulf Hansson
2018-12-06 9:28 ` Du, Alek
2018-12-04 12:47 ` [PATCH] sdhci: fix the fake timeout bug Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181205111450.300e0478@xdu1-mobl \
--to=alek.du@intel.com \
--cc=adrian.hunter@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox