From: "Ernest Zhang(WH)" <ernest.zhang@bayhubtech.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "Andy Dai (WH)" <andy.dai@bayhubtech.com>,
"Xiaoguang Yu (WH)" <xiaoguang.yu@bayhubtech.com>,
"Shirley Her (SC)" <shirley.her@bayhubtech.com>,
"Mike Li (WH)" <mike.li@bayhubtech.com>
Subject: [PATCH V2 2/2] mmc: sdhci: Moving sdhci_o2 into sdhci-pci-o2micro.c
Date: Tue, 18 Dec 2018 11:40:37 +0000 [thread overview]
Message-ID: <20181218114003.10002-2-ernest.zhang@bayhubtech.com> (raw)
In-Reply-To: <20181218114003.10002-1-ernest.zhang@bayhubtech.com>
Moving sdhci_o2 into sdhci-pci-o2micro.c
Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com>
---
Change in V2:
1. Moving sdhci_o2 into sdhci-pci-o2micro.c
Change in V1:
N/A
---
drivers/mmc/host/sdhci-pci-core.c | 19 -------------------
drivers/mmc/host/sdhci-pci-o2micro.c | 19 +++++++++++++++++++
drivers/mmc/host/sdhci-pci.h | 1 +
3 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index fc4f35653602..99b0fec2836b 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1257,25 +1257,6 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
}
#endif
-static const struct sdhci_ops sdhci_pci_o2_ops = {
- .set_clock = sdhci_pci_o2_set_clock,
- .enable_dma = sdhci_pci_enable_dma,
- .set_bus_width = sdhci_set_bus_width,
- .reset = sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
-};
-
-static const struct sdhci_pci_fixes sdhci_o2 = {
- .probe = sdhci_pci_o2_probe,
- .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
- .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
- .probe_slot = sdhci_pci_o2_probe_slot,
-#ifdef CONFIG_PM_SLEEP
- .resume = sdhci_pci_o2_resume,
-#endif
- .ops = &sdhci_pci_o2_ops,
-};
-
static const struct sdhci_pci_fixes sdhci_jmicron = {
.probe = jmicron_probe,
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 506b93e5dcd8..7f11cee71db1 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -665,3 +665,22 @@ int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
return sdhci_pci_resume_host(chip);
}
#endif
+
+static const struct sdhci_ops sdhci_pci_o2_ops = {
+ .set_clock = sdhci_pci_o2_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+const struct sdhci_pci_fixes sdhci_o2 = {
+ .probe = sdhci_pci_o2_probe,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
+ .probe_slot = sdhci_pci_o2_probe_slot,
+#ifdef CONFIG_PM_SLEEP
+ .resume = sdhci_pci_o2_resume,
+#endif
+ .ops = &sdhci_pci_o2_ops,
+};
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index e41a85f0b40a..0e08021179a8 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -188,5 +188,6 @@ void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock);
extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps;
+extern const struct sdhci_pci_fixes sdhci_o2;
#endif /* __SDHCI_PCI_H */
--
2.16.4
next prev parent reply other threads:[~2018-12-18 11:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-18 11:40 [PATCH V2 1/2] mmc: sdhci: Fix O2 Host PLL and card detect issue Ernest Zhang(WH)
2018-12-18 11:40 ` Ernest Zhang(WH) [this message]
2018-12-21 13:30 ` [PATCH V2 2/2] mmc: sdhci: Moving sdhci_o2 into sdhci-pci-o2micro.c Adrian Hunter
2018-12-21 13:42 ` [PATCH V2 1/2] mmc: sdhci: Fix O2 Host PLL and card detect issue Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181218114003.10002-2-ernest.zhang@bayhubtech.com \
--to=ernest.zhang@bayhubtech.com \
--cc=adrian.hunter@intel.com \
--cc=andy.dai@bayhubtech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mike.li@bayhubtech.com \
--cc=shirley.her@bayhubtech.com \
--cc=ulf.hansson@linaro.org \
--cc=xiaoguang.yu@bayhubtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox