From: Luca Porzio <porzio@gmail.com>
To: linux-mmc@vger.kernel.org
Cc: Zhan Liu <zliua@micron.com>, Luca Porzio <lporzio@micron.com>
Subject: [RFC PATCH 1/2] remove field use_cqe in mmc_queue
Date: Mon, 15 Feb 2021 01:32:18 +0100 [thread overview]
Message-ID: <20210215003217.GA12240@lupo-laptop> (raw)
Remove usage of use_cqe parameter in mmc_queue
and use more appropriate mmc_host->cqe_enabled
Signed-off-by: Luca Porzio <lporzio@micron.com>
Signed-off-by: Zhan Liu <zliua@micron.com>
---
drivers/mmc/core/block.c | 7 ++++---
drivers/mmc/core/queue.c | 11 +++++------
drivers/mmc/core/queue.h | 1 -
3 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index b877f62df366..08b3c4c4b9f6 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1933,8 +1933,9 @@ static void mmc_blk_hsq_req_done(struct mmc_request *mrq)
void mmc_blk_mq_complete(struct request *req)
{
struct mmc_queue *mq = req->q->queuedata;
+ struct mmc_host *host = mq->card->host;
- if (mq->use_cqe)
+ if (host->cqe_enabled)
mmc_blk_cqe_complete_rq(mq, req);
else if (likely(!blk_should_fake_timeout(req->q)))
mmc_blk_mq_complete_rq(mq, req);
@@ -2179,7 +2180,7 @@ static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq,
static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host)
{
- if (mq->use_cqe)
+ if (host->cqe_enabled)
return host->cqe_ops->cqe_wait_for_idle(host);
return mmc_blk_rw_wait(mq, NULL);
@@ -2228,7 +2229,7 @@ enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req)
break;
case REQ_OP_READ:
case REQ_OP_WRITE:
- if (mq->use_cqe)
+ if (host->cqe_enabled)
ret = mmc_blk_cqe_issue_rw_rq(mq, req);
else
ret = mmc_blk_mq_issue_rw_rq(mq, req);
diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index 27d2b8ed9484..d600e0a4a460 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -60,7 +60,7 @@ enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req)
{
struct mmc_host *host = mq->card->host;
- if (mq->use_cqe && !host->hsq_enabled)
+ if (host->cqe_enabled && !host->hsq_enabled)
return mmc_cqe_issue_type(host, req);
if (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_WRITE)
@@ -127,7 +127,7 @@ static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req,
bool ignore_tout;
spin_lock_irqsave(&mq->lock, flags);
- ignore_tout = mq->recovery_needed || !mq->use_cqe || host->hsq_enabled;
+ ignore_tout = mq->recovery_needed || !host->cqe_enabled || host->hsq_enabled;
spin_unlock_irqrestore(&mq->lock, flags);
return ignore_tout ? BLK_EH_RESET_TIMER : mmc_cqe_timed_out(req);
@@ -144,7 +144,7 @@ static void mmc_mq_recovery_handler(struct work_struct *work)
mq->in_recovery = true;
- if (mq->use_cqe && !host->hsq_enabled)
+ if (host->cqe_enabled && !host->hsq_enabled)
mmc_blk_cqe_recovery(mq);
else
mmc_blk_mq_recovery(mq);
@@ -315,7 +315,7 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
if (get_card)
mmc_get_card(card, &mq->ctx);
- if (mq->use_cqe) {
+ if (host->cqe_enabled) {
host->retune_now = host->need_retune && cqe_retune_ok &&
!host->hold_retune;
}
@@ -430,7 +430,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card)
int ret;
mq->card = card;
- mq->use_cqe = host->cqe_enabled;
spin_lock_init(&mq->lock);
@@ -440,7 +439,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card)
* The queue depth for CQE must match the hardware because the request
* tag is used to index the hardware queue.
*/
- if (mq->use_cqe && !host->hsq_enabled)
+ if (host->cqe_enabled && !host->hsq_enabled)
mq->tag_set.queue_depth =
min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth);
else
diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h
index 57c59b6cb1b9..3319d8ab57d0 100644
--- a/drivers/mmc/core/queue.h
+++ b/drivers/mmc/core/queue.h
@@ -82,7 +82,6 @@ struct mmc_queue {
unsigned int cqe_busy;
#define MMC_CQE_DCMD_BUSY BIT(0)
bool busy;
- bool use_cqe;
bool recovery_needed;
bool in_recovery;
bool rw_wait;
--
2.17.1
next reply other threads:[~2021-02-15 0:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-15 0:32 Luca Porzio [this message]
2021-03-09 9:01 ` [RFC PATCH 1/2] remove field use_cqe in mmc_queue Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210215003217.GA12240@lupo-laptop \
--to=porzio@gmail.com \
--cc=linux-mmc@vger.kernel.org \
--cc=lporzio@micron.com \
--cc=zliua@micron.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox