[PATCH AUTOSEL 5.10 147/176] mmc: sdhci-of-arasan: Check return value of non-void funtions

[Sasha Levin <sashal@kernel.org>]

From: Manish Narani <manish.narani@xilinx.com>

[ Upstream commit 66bad6ed2204fdb78a0a8fb89d824397106a5471 ]

At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.

Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-5-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-of-arasan.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 0c5479a06e9e..fc38db64a6b4 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -273,7 +273,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 			 * through low speeds without power cycling.
 			 */
 			sdhci_set_clock(host, host->max_clk);
-			phy_power_on(sdhci_arasan->phy);
+			if (phy_power_on(sdhci_arasan->phy)) {
+				pr_err("%s: Cannot power on phy.\n",
+				       mmc_hostname(host->mmc));
+				return;
+			}
+
 			sdhci_arasan->is_phy_on = true;
 
 			/*
@@ -323,7 +328,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 		msleep(20);
 
 	if (ctrl_phy) {
-		phy_power_on(sdhci_arasan->phy);
+		if (phy_power_on(sdhci_arasan->phy)) {
+			pr_err("%s: Cannot power on phy.\n",
+			       mmc_hostname(host->mmc));
+			return;
+		}
+
 		sdhci_arasan->is_phy_on = true;
 	}
 }
@@ -479,7 +489,9 @@ static int sdhci_arasan_suspend(struct device *dev)
 		ret = phy_power_off(sdhci_arasan->phy);
 		if (ret) {
 			dev_err(dev, "Cannot power off phy.\n");
-			sdhci_resume_host(host);
+			if (sdhci_resume_host(host))
+				dev_err(dev, "Cannot resume host.\n");
+
 			return ret;
 		}
 		sdhci_arasan->is_phy_on = false;
-- 
2.30.2