[PATCH v2 5/7] ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list

[Hans de Goede <hdegoede@redhat.com>]

The Xiaomi Mi Pad 2 has backlit LEDs behind the capacitive menu, home
and back buttons below the screen which are controlled by the PWM2
controller of the CHT SoC. This PWM2 controller gets hidden by the
firmware, add it to the always_present_ids table so that we can use
the PWM controller to control the backlighting of the buttons.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Rebase on top of other patches in this series
- Add to this series since it now relies on other patches from this series
---
 drivers/acpi/x86/utils.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index b3fb428461c6..a2ae1ac41319 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -71,6 +71,12 @@ static const struct override_status_id override_status_ids[] = {
 	PRESENT_ENTRY_HID("80860F09", "1", ATOM_SILVERMONT, {}),
 	PRESENT_ENTRY_HID("80862288", "1", ATOM_AIRMONT, {}),
 
+	/* The Xiaomi Mi Pad 2 uses PWM2 for touchkeys backlight control */
+	PRESENT_ENTRY_HID("80862289", "2", ATOM_AIRMONT, {
+		DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
+	      }),
+
 	/*
 	 * The INT0002 device is necessary to clear wakeup interrupt sources
 	 * on Cherry Trail devices, without it we get nobody cared IRQ msgs.
-- 
2.33.1