[PATCH V3 5/7] mmc: add UHS-II related definitions in headers

[Jason Lai <jasonlai.genesyslogic@gmail.com>]

From: Jason Lai <jason.lai@genesyslogic.com.tw>

1. Define UHS2 members in some data structures.
2. Define UHS2 registers and messages.

Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
---
 drivers/mmc/core/sd_uhs2.h  |  16 +++
 include/linux/mmc/card.h    |  30 +++++-
 include/linux/mmc/core.h    |   6 ++
 include/linux/mmc/host.h    |  41 +++++++-
 include/linux/mmc/sd_uhs2.h | 198 ++++++++++++++++++++++++++++++++++++
 5 files changed, 289 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mmc/core/sd_uhs2.h
 create mode 100644 include/linux/mmc/sd_uhs2.h

diff --git a/drivers/mmc/core/sd_uhs2.h b/drivers/mmc/core/sd_uhs2.h
new file mode 100644
index 000000000000..91e895b331e0
--- /dev/null
+++ b/drivers/mmc/core/sd_uhs2.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Header file for UHS-II packets, Host Controller registers and I/O
+ * accessors.
+ *
+ *  Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ */
+#ifndef MMC_UHS2_H
+#define MMC_UHS2_H
+
+struct mmc_host;
+struct mmc_request;
+
+int sd_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
+
+#endif /* MMC_UHS2_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 610577d531c3..48c72bb75d74 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -213,7 +213,35 @@ struct sd_ext_reg {
 
 struct sd_uhs2_config {
 	u32			node_id;
-	/* TODO: Extend with more register configs. */
+
+	u32			dap;
+	u32			gap;
+	u32			n_fcu;
+	u32			maxblk_len;
+	u8			n_lanes;
+	u8			dadr_len;
+	u8			app_type;
+	u8			phy_minor_rev;
+	u8			phy_major_rev;
+	u8			can_hibernate;
+	u8			n_lss_sync;
+	u8			n_lss_dir;
+	u8			link_minor_rev;
+	u8			link_major_rev;
+	u8			dev_type;
+	u8			n_data_gap;
+
+	u32			n_fcu_set;
+	u32			maxblk_len_set;
+	u8			n_lanes_set;
+	u8			speed_range_set;
+	u8			n_lss_sync_set;
+	u8			n_lss_dir_set;
+	u8			n_data_gap_set;
+	u8			pwrctrl_mode_set;
+	u8			max_retry_set;
+
+	u8			cfg_complete;
 };
 
 struct sdio_cccr {
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 71101d1ec825..cfc87be6700a 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -2,6 +2,7 @@
 /*
  *  linux/include/linux/mmc/core.h
  */
+
 #ifndef LINUX_MMC_CORE_H
 #define LINUX_MMC_CORE_H
 
@@ -109,6 +110,11 @@ struct mmc_command {
 	unsigned int		busy_timeout;	/* busy detect timeout in ms */
 	struct mmc_data		*data;		/* data segment associated with cmd */
 	struct mmc_request	*mrq;		/* associated request */
+
+	struct uhs2_command	*uhs2_cmd;	/* UHS2 command */
+	u8			*uhs2_resp;	/* UHS2 native cmd resp */
+	u8			uhs2_resp_len;	/* UHS2 native cmd resp len */
+	u8			uhs2_tmode0_flag; /* UHS2 transfer mode flag */
 };
 
 struct mmc_data {
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index d770941f05c7..39b39e0cdb2f 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -13,6 +13,7 @@
 
 #include <linux/mmc/core.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/sd_uhs2.h>
 #include <linux/mmc/pm.h>
 #include <linux/dma-direction.h>
 #include <linux/blk-crypto-profile.h>
@@ -96,7 +97,38 @@ struct mmc_clk_phase_map {
 };
 
 struct sd_uhs2_caps {
-	/* TODO: Add UHS-II capabilities for the host. */
+	int			flags;
+#define MMC_UHS2_SUPPORT	BIT(0)
+#define MMC_UHS2_INITIALIZED	BIT(1)
+#define MMC_UHS2_2L_HD		BIT(2)
+#define MMC_UHS2_APP_CMD	BIT(3)
+#define MMC_UHS2_SPEED_B	BIT(4)
+#define MMC_SUPPORT_ADMA3	BIT(5)
+
+	u32	dap;
+	u32	gap;
+	u32	group_desc;
+	u32	maxblk_len;
+	u32	n_fcu;
+	u8	n_lanes;
+	u8	addr64;
+	u8	card_type;
+	u8	phy_rev;
+	u8	speed_range;
+	u8	can_hibernate;
+	u8	n_lss_sync;
+	u8	n_lss_dir;
+	u8	link_rev;
+	u8	host_type;
+	u8	n_data_gap;
+
+	u32	maxblk_len_set;
+	u32	n_fcu_set;
+	u8	n_lanes_set;
+	u8	n_lss_sync_set;
+	u8	n_lss_dir_set;
+	u8	n_data_gap_set;
+	u8	max_retry_set;
 };
 
 struct mmc_host;
@@ -212,6 +244,13 @@ struct mmc_host_ops {
 
 	/* Initialize an SD express card, mandatory for MMC_CAP2_SD_EXP. */
 	int	(*init_sd_express)(struct mmc_host *host, struct mmc_ios *ios);
+
+	/* UHS2 interfaces */
+	/*
+	 * Every host controller can assign its own actions to set up their
+	 * controller.
+	 */
+	int	(*uhs2_host_operation)(struct mmc_host *host, enum uhs2_action act);
 };
 
 struct mmc_cqe_ops {
diff --git a/include/linux/mmc/sd_uhs2.h b/include/linux/mmc/sd_uhs2.h
new file mode 100644
index 000000000000..e134e194d581
--- /dev/null
+++ b/include/linux/mmc/sd_uhs2.h
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Header file for UHS-II packets, Host Controller registers and I/O
+ * accessors.
+ *
+ *  Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ */
+#ifndef LINUX_MMC_UHS2_H
+#define LINUX_MMC_UHS2_H
+
+/* LINK Layer definition */
+/* UHS2 Header */
+#define UHS2_NATIVE_PACKET_POS	7
+#define UHS2_NATIVE_PACKET	(1 << UHS2_NATIVE_PACKET_POS)
+
+#define UHS2_PACKET_TYPE_POS	4
+#define UHS2_PACKET_TYPE_CCMD	(0 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_DCMD	(1 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_RES	(2 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_DATA	(3 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_MSG	(7 << UHS2_PACKET_TYPE_POS)
+
+#define UHS2_DEST_ID_MASK	0x0F
+#define UHS2_DEST_ID		0x1
+
+#define UHS2_SRC_ID_POS		12
+#define UHS2_SRC_ID_MASK	0xF000
+
+#define UHS2_TRANS_ID_POS	8
+#define UHS2_TRANS_ID_MASK	0x0700
+
+/* UHS2 MSG */
+#define UHS2_MSG_CTG_POS	5
+#define UHS2_MSG_CTG_LMSG	0x00
+#define UHS2_MSG_CTG_INT	0x60
+#define UHS2_MSG_CTG_AMSG	0x80
+
+#define UHS2_MSG_CTG_FCREQ	0x00
+#define UHS2_MSG_CTG_FCRDY	0x01
+#define UHS2_MSG_CTG_STAT	0x02
+
+#define UHS2_MSG_CODE_POS			8
+#define UHS2_MSG_CODE_FC_UNRECOVER_ERR		0x8
+#define UHS2_MSG_CODE_STAT_UNRECOVER_ERR	0x8
+#define UHS2_MSG_CODE_STAT_RECOVER_ERR		0x1
+
+/* TRANS Layer definition */
+
+/* Native packets*/
+#define UHS2_NATIVE_CMD_RW_POS	7
+#define UHS2_NATIVE_CMD_WRITE	(1 << UHS2_NATIVE_CMD_RW_POS)
+#define UHS2_NATIVE_CMD_READ	(0 << UHS2_NATIVE_CMD_RW_POS)
+
+#define UHS2_NATIVE_CMD_PLEN_POS	4
+#define UHS2_NATIVE_CMD_PLEN_4B		(1 << UHS2_NATIVE_CMD_PLEN_POS)
+#define UHS2_NATIVE_CMD_PLEN_8B		(2 << UHS2_NATIVE_CMD_PLEN_POS)
+#define UHS2_NATIVE_CMD_PLEN_16B	(3 << UHS2_NATIVE_CMD_PLEN_POS)
+
+#define UHS2_NATIVE_CCMD_GET_MIOADR_MASK	0xF00
+#define UHS2_NATIVE_CCMD_MIOADR_MASK		0x0F
+
+#define UHS2_NATIVE_CCMD_LIOADR_POS		8
+#define UHS2_NATIVE_CCMD_GET_LIOADR_MASK	0x0FF
+
+#define UHS2_DCMD_DM_POS	6
+#define UHS2_DCMD_2L_HD_MODE	(1 << UHS2_DCMD_DM_POS)
+#define UHS2_DCMD_LM_POS	5
+#define UHS2_DCMD_LM_TLEN_EXIST	(1 << UHS2_DCMD_LM_POS)
+#define UHS2_DCMD_TLUM_POS	4
+#define UHS2_DCMD_TLUM_BYTE_MODE	(1 << UHS2_DCMD_TLUM_POS)
+#define UHS2_NATIVE_DCMD_DAM_POS	3
+#define UHS2_NATIVE_DCMD_DAM_IO		(1 << UHS2_NATIVE_DCMD_DAM_POS)
+
+#define UHS2_RES_NACK_POS	7
+#define UHS2_RES_NACK_MASK	(0x1 << UHS2_RES_NACK_POS)
+
+#define UHS2_RES_ECODE_POS	4
+#define UHS2_RES_ECODE_MASK	0x7
+#define UHS2_RES_ECODE_COND	1
+#define UHS2_RES_ECODE_ARG	2
+#define UHS2_RES_ECODE_GEN	3
+
+/* IOADR of device registers */
+#define UHS2_IOADR_GENERIC_CAPS		0x00
+#define UHS2_IOADR_PHY_CAPS		0x02
+#define UHS2_IOADR_LINK_CAPS		0x04
+#define UHS2_IOADR_RSV_CAPS		0x06
+#define UHS2_IOADR_GENERIC_SETTINGS	0x08
+#define UHS2_IOADR_PHY_SETTINGS		0x0A
+#define UHS2_IOADR_LINK_SETTINGS	0x0C
+#define UHS2_IOADR_PRESET		0x40
+
+/* SD application packets */
+#define UHS2_SD_CMD_INDEX_POS		8
+
+#define UHS2_SD_CMD_APP_POS		14
+#define UHS2_SD_CMD_APP			(1 << UHS2_SD_CMD_APP_POS)
+
+struct uhs2_command {
+	u16	header;
+	u16	arg;
+	u32	*payload;
+	u32	payload_len;
+	u32	packet_len;
+};
+
+enum uhs2_action {
+	UHS2_SET_CONFIG,
+	UHS2_ENABLE_INT,
+	UHS2_DISABLE_INT,
+	UHS2_SET_SPEED_B,
+	UHS2_CHECK_DORMANT,
+	UHS2_SW_RESET,
+	UHS2_DETECT_INIT,
+	UHS2_DISABLE_CLK,
+	UHS2_ENABLE_CLK,
+	UHS2_POST_ATTACH_SD
+};
+
+/* UHS-II Device Registers */
+#define UHS2_DEV_CONFIG_REG	0x000
+
+/* General Caps and Settings registers */
+#define  UHS2_DEV_CONFIG_GEN_CAPS	(UHS2_DEV_CONFIG_REG + 0x000)
+#define   UHS2_DEV_CONFIG_N_LANES_POS	8
+#define   UHS2_DEV_CONFIG_N_LANES_MASK	0x3F
+#define   UHS2_DEV_CONFIG_2L_HD_FD	0x1
+#define   UHS2_DEV_CONFIG_2D1U_FD	0x2
+#define   UHS2_DEV_CONFIG_1D2U_FD	0x4
+#define   UHS2_DEV_CONFIG_2D2U_FD	0x8
+#define   UHS2_DEV_CONFIG_DADR_POS	14
+#define   UHS2_DEV_CONFIG_DADR_MASK	0x1
+#define   UHS2_DEV_CONFIG_APP_POS	16
+#define   UHS2_DEV_CONFIG_APP_MASK	0xFF
+#define   UHS2_DEV_CONFIG_APP_SD_MEM	0x1
+
+#define  UHS2_DEV_CONFIG_GEN_SET	(UHS2_DEV_CONFIG_REG + 0x008)
+#define   UHS2_DEV_CONFIG_GEN_SET_N_LANES_POS	8
+#define   UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD	0x0
+#define   UHS2_DEV_CONFIG_GEN_SET_2D1U_FD	0x2
+#define   UHS2_DEV_CONFIG_GEN_SET_1D2U_FD	0x3
+#define   UHS2_DEV_CONFIG_GEN_SET_2D2U_FD	0x4
+#define   UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE	(0x1 << 31)
+
+/* PHY Caps and Settings registers */
+#define  UHS2_DEV_CONFIG_PHY_CAPS	(UHS2_DEV_CONFIG_REG + 0x002)
+#define   UHS2_DEV_CONFIG_PHY_MINOR_MASK	0xF
+#define   UHS2_DEV_CONFIG_PHY_MAJOR_POS		4
+#define   UHS2_DEV_CONFIG_PHY_MAJOR_MASK	0x3
+#define   UHS2_DEV_CONFIG_CAN_HIBER_POS		15
+#define   UHS2_DEV_CONFIG_CAN_HIBER_MASK	0x1
+#define  UHS2_DEV_CONFIG_PHY_CAPS1	(UHS2_DEV_CONFIG_REG + 0x003)
+#define   UHS2_DEV_CONFIG_N_LSS_SYN_MASK	0xF
+#define   UHS2_DEV_CONFIG_N_LSS_DIR_POS		4
+#define   UHS2_DEV_CONFIG_N_LSS_DIR_MASK	0xF
+
+#define  UHS2_DEV_CONFIG_PHY_SET	(UHS2_DEV_CONFIG_REG + 0x00A)
+#define   UHS2_DEV_CONFIG_PHY_SET_SPEED_POS	6
+#define   UHS2_DEV_CONFIG_PHY_SET_SPEED_A	0x0
+#define   UHS2_DEV_CONFIG_PHY_SET_SPEED_B	0x1
+
+/* LINK-TRAN Caps and Settings registers */
+#define  UHS2_DEV_CONFIG_LINK_TRAN_CAPS	(UHS2_DEV_CONFIG_REG + 0x004)
+#define   UHS2_DEV_CONFIG_LT_MINOR_MASK		0xF
+#define   UHS2_DEV_CONFIG_LT_MAJOR_POS		4
+#define   UHS2_DEV_CONFIG_LT_MAJOR_MASK		0x3
+#define   UHS2_DEV_CONFIG_N_FCU_POS		8
+#define   UHS2_DEV_CONFIG_N_FCU_MASK		0xFF
+#define   UHS2_DEV_CONFIG_DEV_TYPE_POS		16
+#define   UHS2_DEV_CONFIG_DEV_TYPE_MASK		0x7
+#define   UHS2_DEV_CONFIG_MAX_BLK_LEN_POS	20
+#define   UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK	0xFFF
+#define  UHS2_DEV_CONFIG_LINK_TRAN_CAPS1	(UHS2_DEV_CONFIG_REG + 0x005)
+#define   UHS2_DEV_CONFIG_N_DATA_GAP_MASK	0xFF
+
+#define  UHS2_DEV_CONFIG_LINK_TRAN_SET	(UHS2_DEV_CONFIG_REG + 0x00C)
+#define   UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN	0x200
+#define   UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS	16
+
+/* Preset register */
+#define  UHS2_DEV_CONFIG_PRESET		(UHS2_DEV_CONFIG_REG + 0x040)
+
+#define UHS2_DEV_INT_REG	0x100
+
+#define UHS2_DEV_STATUS_REG	0x180
+
+#define UHS2_DEV_CMD_REG	0x200
+#define  UHS2_DEV_CMD_FULL_RESET	(UHS2_DEV_CMD_REG + 0x000)
+#define  UHS2_DEV_CMD_GO_DORMANT_STATE	(UHS2_DEV_CMD_REG + 0x001)
+#define   UHS2_DEV_CMD_DORMANT_HIBER	(0x1 << 7)
+#define  UHS2_DEV_CMD_DEVICE_INIT	(UHS2_DEV_CMD_REG + 0x002)
+#define  UHS2_DEV_CMD_ENUMERATE		(UHS2_DEV_CMD_REG + 0x003)
+#define  UHS2_DEV_CMD_TRANS_ABORT	(UHS2_DEV_CMD_REG + 0x004)
+
+#define UHS2_RCLK_MAX	52000000
+#define UHS2_RCLK_MIN	26000000
+
+#endif /* LINUX_MMC_UHS2_H */
-- 
2.35.1