[PATCH 4/4] arm64: dts: docs: Update mmc meson-gx documentation for new config option amlogic,mmc-phase

[Vyacheslav Bocharov <adeep@lexina.in>]

- amlogic,mmc-phases: 3-element array of clock phases for core, tx, rx
clock with values:
	0: CLK_PHASE_0 - 0 phase
	1: CLK_PHASE_90 - 90 phase
	2: CLK_PHASE_180 - 180 phase
	3: CLK_PHASE_270 - 270 phase
By default driver use <CLK_PHASE_180 CLK_PHASE_0 CLK_PHASE_0> value.

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>

diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
index ccc5358db131..98c89c5b3455 100644
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
@@ -25,6 +25,12 @@ Required properties:
 Optional properties:
 - amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the
   DRAM memory, like on the G12A dedicated SDIO controller.
+- amlogic,mmc-phases: 3-element array of clock phases for core, tx, rx clock with values:
+	0: CLK_PHASE_0 - 0 phase
+	1: CLK_PHASE_90 - 90 phase
+	2: CLK_PHASE_180 - 180 phase
+	3: CLK_PHASE_270 - 270 phase
+  By default driver use <CLK_PHASE_180 CLK_PHASE_0 CLK_PHASE_0> value.
 
 Example:
 
@@ -36,4 +42,5 @@ Example:
 		clock-names = "core", "clkin0", "clkin1";
 		pinctrl-0 = <&emmc_pins>;
 		resets = <&reset RESET_SD_EMMC_A>;
+		amlogic,mmc-phases = <CLK_PHASE_180 CLK_PHASE_0 CLK_PHASE_0>;
 	};
-- 
2.30.2