From: Thierry Reding <thierry.reding@gmail.com>
To: Joerg Roedel <joro@8bytes.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Robin Murphy <robin.murphy@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Prathamesh Shete <pshete@nvidia.com>,
Will Deacon <will@kernel.org>,
iommu@lists.linux-foundation.org, linux-mmc@vger.kernel.org,
linux-tegra@vger.kernel.org, Thierry Reding <treding@nvidia.com>
Subject: [PATCH v12 6/6] mmc: sdhci-tegra: Issue CMD and DAT resets together
Date: Fri, 2 Dec 2022 16:26:44 +0100 [thread overview]
Message-ID: <20221202152644.29450-7-thierry.reding@gmail.com> (raw)
In-Reply-To: <20221202152644.29450-1-thierry.reding@gmail.com>
From: Prathamesh Shete <pshete@nvidia.com>
In case of error condition to avoid system crash Tegra SDMMC controller
requires CMD and DAT resets issued together. SDHCI controller FSM goes
into bad state due to rapid SD card hot-plug event. Issuing reset on the
CMD FSM before DATA FSM results in kernel panic, hence add support to
issue CMD and DAT resets together.
This is applicable to Tegra186 and later chips.
Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 3 ++-
drivers/mmc/host/sdhci.c | 5 +++++
drivers/mmc/host/sdhci.h | 2 ++
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index c17700fa9899..49f60e292551 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -1528,7 +1528,8 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER,
.ops = &tegra186_sdhci_ops,
};
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index df1c1d10a338..81f4fed11629 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -270,6 +270,11 @@ enum sdhci_reset_reason {
static void sdhci_reset_for_reason(struct sdhci_host *host, enum sdhci_reset_reason reason)
{
+ if (host->quirks2 & SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER) {
+ sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ return;
+ }
+
switch (reason) {
case SDHCI_RESET_FOR_INIT:
sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b6f31a7d6152..605eaee805f7 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -478,6 +478,8 @@ struct sdhci_host {
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
+/* Issue CMD and DATA reset together */
+#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER (1<<19)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.38.1
prev parent reply other threads:[~2022-12-02 15:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-02 15:26 [PATCH v12 0/6] mmc: sdhci: Add Tegra234 support Thierry Reding
2022-12-02 15:26 ` [PATCH v12 1/6] iommu: Add note about struct iommu_fwspec usage Thierry Reding
2022-12-02 15:26 ` [PATCH v12 2/6] iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper Thierry Reding
2022-12-05 19:03 ` Robin Murphy
2022-12-06 16:49 ` Thierry Reding
2022-12-02 15:26 ` [PATCH v12 3/6] mmc: sdhci-tegra: Sort includes alphabetically Thierry Reding
2022-12-02 15:26 ` [PATCH v12 4/6] mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data Thierry Reding
2022-12-02 15:26 ` [PATCH v12 5/6] mmc: sdhci-tegra: Add support to program MC stream ID Thierry Reding
2022-12-02 15:26 ` Thierry Reding [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221202152644.29450-7-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jonathanh@nvidia.com \
--cc=joro@8bytes.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pshete@nvidia.com \
--cc=robin.murphy@arm.com \
--cc=treding@nvidia.com \
--cc=ulf.hansson@linaro.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox