From: Ricky Wu <ricky_wu@realtek.com>
To: <arnd@arndb.de>, <gregkh@linuxfoundation.org>,
<linux-kernel@vger.kernel.org>, <ulf.hansson@linaro.org>,
<frank.li@vivo.com>, <u.kleine-koenig@pengutronix.de>,
<linux-mmc@vger.kernel.org>
Cc: <ricky_wu@realtek.com>
Subject: [PATCH v7 2/3] misc: rtsx: add to support new card reader rts5264
Date: Fri, 8 Dec 2023 11:21:44 +0800 [thread overview]
Message-ID: <20231208032145.2143580-3-ricky_wu@realtek.com> (raw)
In-Reply-To: <20231208032145.2143580-1-ricky_wu@realtek.com>
in order to support rts5264 in rtsx_pcr add the id in and
determine whether the device is rts5264 to call rts5264
functions and do rts5264 workflows or set rts5264 registers
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
---
v4: split new definition up from v3
v3: split the patch up with cardreader part and mmc part
v2: removed ic version check
---
---
drivers/misc/cardreader/rtsx_pcr.c | 30 +++++++++++++++++++++++++-----
drivers/misc/cardreader/rtsx_pcr.h | 1 +
2 files changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
index a30751ad3733..1a64364700eb 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -26,6 +26,7 @@
#include "rtsx_pcr.h"
#include "rts5261.h"
#include "rts5228.h"
+#include "rts5264.h"
static bool msi_en = true;
module_param(msi_en, bool, S_IRUGO | S_IWUSR);
@@ -54,6 +55,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
{ PCI_DEVICE(0x10EC, 0x5260), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5261), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5228), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5264), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -714,6 +716,9 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
if (PCI_PID(pcr) == PID_5228)
return rts5228_pci_switch_clock(pcr, card_clock,
ssc_depth, initial_mode, double_clk, vpclk);
+ if (PCI_PID(pcr) == PID_5264)
+ return rts5264_pci_switch_clock(pcr, card_clock,
+ ssc_depth, initial_mode, double_clk, vpclk);
if (initial_mode) {
/* We use 250k(around) here, in initial stage */
@@ -987,7 +992,8 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
int_reg &= (pcr->bier | 0x7FFFFF);
- if (int_reg & SD_OC_INT)
+ if ((int_reg & SD_OC_INT) ||
+ ((int_reg & SD_OVP_INT) && (PCI_PID(pcr) == PID_5264)))
rtsx_pci_process_ocp_interrupt(pcr);
if (int_reg & SD_INT) {
@@ -1159,7 +1165,9 @@ void rtsx_pci_enable_oobs_polling(struct rtsx_pcr *pcr)
{
u16 val;
- if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) {
+ if ((PCI_PID(pcr) != PID_525A) &&
+ (PCI_PID(pcr) != PID_5260) &&
+ (PCI_PID(pcr) != PID_5264)) {
rtsx_pci_read_phy_register(pcr, 0x01, &val);
val |= 1<<9;
rtsx_pci_write_phy_register(pcr, 0x01, val);
@@ -1175,7 +1183,9 @@ void rtsx_pci_disable_oobs_polling(struct rtsx_pcr *pcr)
{
u16 val;
- if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) {
+ if ((PCI_PID(pcr) != PID_525A) &&
+ (PCI_PID(pcr) != PID_5260) &&
+ (PCI_PID(pcr) != PID_5264)) {
rtsx_pci_read_phy_register(pcr, 0x01, &val);
val &= ~(1<<9);
rtsx_pci_write_phy_register(pcr, 0x01, val);
@@ -1226,7 +1236,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_enable_bus_int(pcr);
/* Power on SSC */
- if (PCI_PID(pcr) == PID_5261) {
+ if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) {
/* Gating real mcu clock */
err = rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
RTS5261_MCU_CLOCK_GATING, 0);
@@ -1270,6 +1280,11 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
else if (PCI_PID(pcr) == PID_5228)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF,
RTS5228_SSC_DEPTH_2M);
+ else if (is_version(pcr, 0x5264, IC_VER_A))
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+ else if (PCI_PID(pcr) == PID_5264)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF,
+ RTS5264_SSC_DEPTH_2M);
else
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, 0x12);
@@ -1305,6 +1320,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
case PID_5260:
case PID_5261:
case PID_5228:
+ case PID_5264:
rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1);
break;
default:
@@ -1404,6 +1420,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5228:
rts5228_init_params(pcr);
break;
+
+ case 0x5264:
+ rts5264_init_params(pcr);
+ break;
}
pcr_dbg(pcr, "PID: 0x%04x, IC version: 0x%02x\n",
@@ -1544,7 +1564,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
pcr->pci = pcidev;
dev_set_drvdata(&pcidev->dev, handle);
- if (CHK_PCI_PID(pcr, 0x525A))
+ if ((CHK_PCI_PID(pcr, 0x525A)) || (CHK_PCI_PID(pcr, 0x5264)))
bar = 1;
len = pci_resource_len(pcidev, bar);
base = pci_resource_start(pcidev, bar);
diff --git a/drivers/misc/cardreader/rtsx_pcr.h b/drivers/misc/cardreader/rtsx_pcr.h
index 37d1f316ae17..9215d66de00c 100644
--- a/drivers/misc/cardreader/rtsx_pcr.h
+++ b/drivers/misc/cardreader/rtsx_pcr.h
@@ -74,6 +74,7 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr);
void rts5260_init_params(struct rtsx_pcr *pcr);
void rts5261_init_params(struct rtsx_pcr *pcr);
void rts5228_init_params(struct rtsx_pcr *pcr);
+void rts5264_init_params(struct rtsx_pcr *pcr);
static inline u8 map_sd_drive(int idx)
{
--
2.25.1
next prev parent reply other threads:[~2023-12-08 3:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-08 3:21 [PATCH v7 0/3] Support new card reader rts5264 Ricky Wu
2023-12-08 3:21 ` [PATCH v7 1/3] misc: rtsx: add to support new card reader rts5264 new definition and function Ricky Wu
2023-12-08 3:21 ` Ricky Wu [this message]
2023-12-08 3:21 ` [PATCH v7 3/3] mmc: rtsx: add rts5264 to support sd express card Ricky Wu
2024-01-05 10:16 ` Ulf Hansson
2024-01-05 10:26 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231208032145.2143580-3-ricky_wu@realtek.com \
--to=ricky_wu@realtek.com \
--cc=arnd@arndb.de \
--cc=frank.li@vivo.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox