From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Chevron Li <chevron.li@bayhubtech.com>,
Dinghao Liu <dinghao.liu@zju.edu.cn>,
Adam Lee <adam.lee@canonical.com>, Chris Ball <chris@printf.net>,
Peter Guo <peter.guo@bayhubtech.com>,
Jennifer Li <Jennifer.li@o2micro.com>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>, stable@vger.kernel.org
Subject: [PATCH 2/2] mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
Date: Mon, 27 May 2024 16:24:42 +0300 [thread overview]
Message-ID: <20240527132443.14038-2-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20240527132443.14038-1-ilpo.jarvinen@linux.intel.com>
sdhci_pci_o2_probe() uses pci_read_config_{byte,dword}() that return
PCIBIOS_* codes. The return code is then returned as is but as
sdhci_pci_o2_probe() is probe function chain, it should return normal
errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning them. Add a label for read failure so that the
conversion can be done in one place rather than on all of the return
statements.
Fixes: 3d757ddbd68c ("mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for UHS-I")
Fixes: d599005afde8 ("mmc: sdhci-pci-o2micro: Add missing checks in sdhci_pci_o2_probe")
Fixes: 706adf6bc31c ("mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support")
Fixes: 01acf6917aed ("mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts")
Fixes: 26daa1ed40c6 ("mmc: sdhci: Disable ADMA on some O2Micro SD/MMC parts.")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/mmc/host/sdhci-pci-o2micro.c | 41 +++++++++++++++-------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index d4a02184784a..058bef1c7e41 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -823,7 +823,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
@@ -834,7 +834,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_CLKREQ, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x20;
pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
@@ -843,7 +843,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
*/
ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x01;
pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
@@ -856,7 +856,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_INF_MOD, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x08;
pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
@@ -864,7 +864,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
@@ -875,7 +875,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
@@ -886,7 +886,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
O2_SD_FUNC_REG0,
&scratch_32);
if (ret)
- return ret;
+ goto read_fail;
scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
/* Check Whether subId is 0x11 or 0x12 */
@@ -898,7 +898,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
O2_SD_FUNC_REG4,
&scratch_32);
if (ret)
- return ret;
+ goto read_fail;
/* Enable Base Clk setting change */
scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
@@ -921,7 +921,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLK_SETTING, &scratch_32);
if (ret)
- return ret;
+ goto read_fail;
scratch_32 &= ~(0xFF00);
scratch_32 |= 0x07E0C800;
@@ -931,14 +931,14 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLKREQ, &scratch_32);
if (ret)
- return ret;
+ goto read_fail;
scratch_32 |= 0x3;
pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
if (ret)
- return ret;
+ goto read_fail;
scratch_32 &= ~(0x1F3F070E);
scratch_32 |= 0x18270106;
@@ -949,7 +949,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_CAP_REG2, &scratch_32);
if (ret)
- return ret;
+ goto read_fail;
scratch_32 &= ~(0xE0);
pci_write_config_dword(chip->pdev,
O2_SD_CAP_REG2, scratch_32);
@@ -961,7 +961,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
@@ -971,7 +971,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
@@ -979,7 +979,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
if (ret)
- return ret;
+ goto read_fail;
if ((scratch_32 & 0xff000000) == 0x01000000) {
scratch_32 &= 0x0000FFFF;
@@ -998,7 +998,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
O2_SD_FUNC_REG4,
&scratch_32);
if (ret)
- return ret;
+ goto read_fail;
scratch_32 |= (1 << 22);
pci_write_config_dword(chip->pdev,
O2_SD_FUNC_REG4, scratch_32);
@@ -1017,7 +1017,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
@@ -1028,7 +1028,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
@@ -1057,13 +1057,16 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
/* Lock WP */
ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
if (ret)
- return ret;
+ goto read_fail;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
}
return 0;
+
+read_fail:
+ return pcibios_err_to_errno(ret);
}
#ifdef CONFIG_PM_SLEEP
--
2.39.2
next prev parent reply other threads:[~2024-05-27 13:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-27 13:24 [PATCH 1/2] mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos Ilpo Järvinen
2024-05-27 13:24 ` Ilpo Järvinen [this message]
2024-06-03 7:16 ` [PATCH 2/2] mmc: sdhci-pci-o2micro: " Adrian Hunter
2024-06-04 11:13 ` Ulf Hansson
2024-06-03 7:16 ` [PATCH 1/2] mmc: sdhci-pci: " Adrian Hunter
2024-06-04 11:13 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240527132443.14038-2-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Jennifer.li@o2micro.com \
--cc=adam.lee@canonical.com \
--cc=adrian.hunter@intel.com \
--cc=chevron.li@bayhubtech.com \
--cc=chris@printf.net \
--cc=dinghao.liu@zju.edu.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=peter.guo@bayhubtech.com \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox