From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Subject: [PATCH 3/3] mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
Date: Fri, 14 Jun 2024 11:00:51 +0300 [thread overview]
Message-ID: <20240614080051.4005-4-adrian.hunter@intel.com> (raw)
In-Reply-To: <20240614080051.4005-1-adrian.hunter@intel.com>
SDHCI_QUIRK_UNSTABLE_RO_DETECT is used by only one driver variant.
It was added in 2011 by commit 82b0e23a295c ("mmc: sdhci: Fix read-only
detection with JMicron 388 chip").
Simplify sdhci by moving the logic to the only place it is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci-core.c | 27 ++++++++++++++++++++++-----
drivers/mmc/host/sdhci.c | 31 ++++++-------------------------
drivers/mmc/host/sdhci.h | 3 +--
3 files changed, 29 insertions(+), 32 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 23e6ba70144c..ed45ed0bdafd 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1319,6 +1319,23 @@ static const struct sdhci_pci_fixes sdhci_intel_mrfld_mmc = {
.probe_slot = intel_mrfld_mmc_probe_slot,
};
+#define JMB388_SAMPLE_COUNT 5
+
+static int jmicron_jmb388_get_ro(struct mmc_host *mmc)
+{
+ int i, ro_count;
+
+ ro_count = 0;
+ for (i = 0; i < JMB388_SAMPLE_COUNT; i++) {
+ if (sdhci_get_ro(mmc) > 0) {
+ if (++ro_count > JMB388_SAMPLE_COUNT / 2)
+ return 1;
+ }
+ msleep(30);
+ }
+ return 0;
+}
+
static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
{
u8 scratch;
@@ -1403,11 +1420,6 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
return ret;
}
- /* quirk for unsable RO-detection on JM388 chips */
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD ||
- chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
- chip->quirks |= SDHCI_QUIRK_UNSTABLE_RO_DETECT;
-
return 0;
}
@@ -1462,6 +1474,11 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST;
+ /* Handle unstable RO-detection on JM388 chips */
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
+ slot->host->mmc_host_ops.get_ro = jmicron_jmb388_get_ro;
+
return 0;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 112584aa0772..a20df9383b20 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2513,8 +2513,9 @@ int sdhci_get_cd_nogpio(struct mmc_host *mmc)
}
EXPORT_SYMBOL_GPL(sdhci_get_cd_nogpio);
-static int sdhci_check_ro(struct sdhci_host *host)
+int sdhci_get_ro(struct mmc_host *mmc)
{
+ struct sdhci_host *host = mmc_priv(mmc);
bool allow_invert = false;
int is_readonly;
@@ -2522,10 +2523,10 @@ static int sdhci_check_ro(struct sdhci_host *host)
is_readonly = 0;
} else if (host->ops->get_ro) {
is_readonly = host->ops->get_ro(host);
- } else if (mmc_can_gpio_ro(host->mmc)) {
- is_readonly = mmc_gpio_get_ro(host->mmc);
+ } else if (mmc_can_gpio_ro(mmc)) {
+ is_readonly = mmc_gpio_get_ro(mmc);
/* Do not invert twice */
- allow_invert = !(host->mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+ allow_invert = !(mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
} else {
is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
& SDHCI_WRITE_PROTECT);
@@ -2539,27 +2540,7 @@ static int sdhci_check_ro(struct sdhci_host *host)
return is_readonly;
}
-
-#define SAMPLE_COUNT 5
-
-static int sdhci_get_ro(struct mmc_host *mmc)
-{
- struct sdhci_host *host = mmc_priv(mmc);
- int i, ro_count;
-
- if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
- return sdhci_check_ro(host);
-
- ro_count = 0;
- for (i = 0; i < SAMPLE_COUNT; i++) {
- if (sdhci_check_ro(host)) {
- if (++ro_count > SAMPLE_COUNT / 2)
- return 1;
- }
- msleep(30);
- }
- return 0;
-}
+EXPORT_SYMBOL_GPL(sdhci_get_ro);
static void sdhci_hw_reset(struct mmc_host *mmc)
{
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 957c7a917ffb..f531b617f28d 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -437,8 +437,6 @@ struct sdhci_host {
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
/* Controller treats ADMA descriptors with length 0000h incorrectly */
#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
-/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
-#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
unsigned int quirks2; /* More deviations from spec. */
@@ -788,6 +786,7 @@ void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
int sdhci_get_cd_nogpio(struct mmc_host *mmc);
+int sdhci_get_ro(struct mmc_host *mmc);
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
--
2.34.1
next prev parent reply other threads:[~2024-06-14 8:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-14 8:00 [PATCH 0/3] mmc: sdhci: Tidy-up write-protect handling Adrian Hunter
2024-06-14 8:00 ` [PATCH 1/3] mmc: sdhci: Do not invert write-protect twice Adrian Hunter
2024-06-14 8:00 ` [PATCH 2/3] mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro() Adrian Hunter
2024-06-14 8:00 ` Adrian Hunter [this message]
2024-06-20 15:14 ` [PATCH 0/3] mmc: sdhci: Tidy-up write-protect handling Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240614080051.4005-4-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).