From: Chris Clayton via Bugspray Bot <bugbot@kernel.org>
To: linux-mmc@vger.kernel.org, ulf.hansson@linaro.org
Subject: Re: RTS5229 built in card reader not detected after Linux 5.0.x
Date: Wed, 22 Jan 2025 15:45:19 +0000 [thread overview]
Message-ID: <20250122-b204003c13-13740ac23e02@bugzilla.kernel.org> (raw)
In-Reply-To: <20250122-b204003c0-5776b9acf361@bugzilla.kernel.org>
Chris Clayton writes via Kernel.org Bugzilla:
This bug is a year old now, so here's some more diagnostics that may also act as a ping for the developer who created the regression to fix it, please.
lspci on Ubuntu 20.04 running on Intel NUC6CAYH. Kernel is 5.4.0-39-generic.
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Intel Corporation RTS5229 PCI Express Card Reader
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 91300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, NROPrPrP-, LTR-
10BitTagComp-, 10BitTagReq-, OBFF Not Supported, ExtFmt-, EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-, TPHComp-, ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel modules: rtsx_pci
View: https://bugzilla.kernel.org/show_bug.cgi?id=204003#c13
You can reply to this message to join the discussion.
--
Deet-doot-dot, I am a bot.
Kernel.org Bugzilla (bugspray 0.1-dev)
next prev parent reply other threads:[~2025-01-22 15:45 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-22 15:45 RTS5229 built in card reader not detected after Linux 5.0.x josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` David Lindstrom via Bugspray Bot
2025-01-22 15:45 ` David Lindstrom via Bugspray Bot
2025-01-22 15:45 ` David Lindstrom via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` josiahspore via Bugspray Bot
2025-01-22 15:45 ` Scott Brown via Bugspray Bot
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot [this message]
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot
2025-01-22 15:45 ` Yannis via Bugspray Bot
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot
2025-01-22 15:45 ` Scott Brown via Bugspray Bot
2025-01-22 15:45 ` Scott Brown via Bugspray Bot
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot
2025-01-22 15:45 ` Yannis via Bugspray Bot
2025-01-22 15:45 ` Scott Brown via Bugspray Bot
2025-01-22 15:45 ` Doug Miles via Bugspray Bot
2025-01-22 15:45 ` Chris Clayton via Bugspray Bot
2025-01-22 15:45 ` i.chryssochoos via Bugspray Bot
2025-01-22 15:45 ` Roger Heflin via Bugspray Bot
2025-01-22 15:45 ` Michael Garofalo via Bugspray Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250122-b204003c13-13740ac23e02@bugzilla.kernel.org \
--to=bugbot@kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox