Re: [PATCH 0/2] Fix V1P8_SIGNAL_ENA and HIGH_SPEED_ENA

[Hiago De Franco <hiagofranco@gmail.com>]

Hi Judith,

On Fri, Apr 11, 2025 at 04:55:39PM -0500, Judith Mendez wrote:
> Actually this was one of the previous implementations, I should have that
> original patch somewhere. My understanding was that we do not like adding
> new DT properties if we can find a way to apply the quirk in the driver.

Got it, makes sense. This will work fine with eMMC, but for the SD card
I am not seeing other option. Maybe we could use both implementations?

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index 4e1156a2f1b8..db8ee66e76d8 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -888,7 +888,7 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev,

        /* Suppress V1P8_SIGNAL_ENA for eMMC */
        device_property_read_u32(dev, "bus-width", &bus_width);
-       if (bus_width == BUS_WIDTH_8)
+       if (bus_width == BUS_WIDTH_8 || device_property_read_bool(dev, "ti,suppress-v1p8-ena"))
                sdhci_am654->quirks |= SDHCI_AM654_QUIRK_SUPPRESS_V1P8_ENA;

So the driver applies the quirk for eMMC and we set the DT property for
SD card. Not sure which one is the best, but maybe it is another option.
Let's see what Adrian also thinks about that.

> 
> If this implementation flies with the maintainers, then we can go back to DT
> property implementation.
> 
> Adrian, is this fine with you?
> 
> ~ Judith

Cheers,
Hiago.