From: Victor Shih <victorshihgli@gmail.com>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
benchuanggli@gmail.com, ben.chuang@genesyslogic.com.tw,
HL.Liu@genesyslogic.com.tw, Victor Shih <victorshihgli@gmail.com>,
Victor Shih <victor.shih@genesyslogic.com.tw>,
stable@vger.kernel.org
Subject: [PATCH V3 1/3] mmc: sdhci-pci-gli: Add a new function to simplify the code
Date: Tue, 29 Jul 2025 14:58:04 +0800 [thread overview]
Message-ID: <20250729065806.423902-2-victorshihgli@gmail.com> (raw)
In-Reply-To: <20250729065806.423902-1-victorshihgli@gmail.com>
From: Victor Shih <victor.shih@genesyslogic.com.tw>
In preparation to fix replay timer timeout, add
sdhci_gli_mask_replay_timer_timeout() function
to simplify some of the code, allowing it to be re-used.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
---
drivers/mmc/host/sdhci-pci-gli.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 4c2ae71770f7..f678c91f8d3e 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -287,6 +287,20 @@
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
+static void sdhci_gli_mask_replay_timer_timeout(struct pci_dev *pdev)
+{
+ int aer;
+ u32 value;
+
+ /* mask the replay timer timeout of AER */
+ aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+ if (aer) {
+ pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
+ value |= PCI_ERR_COR_REP_TIMER;
+ pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
+ }
+}
+
static inline void gl9750_wt_on(struct sdhci_host *host)
{
u32 wt_value;
@@ -607,7 +621,6 @@ static void gl9750_hw_setting(struct sdhci_host *host)
{
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct pci_dev *pdev;
- int aer;
u32 value;
pdev = slot->chip->pdev;
@@ -626,12 +639,7 @@ static void gl9750_hw_setting(struct sdhci_host *host)
pci_set_power_state(pdev, PCI_D0);
/* mask the replay timer timeout of AER */
- aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
- if (aer) {
- pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
- value |= PCI_ERR_COR_REP_TIMER;
- pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
- }
+ sdhci_gli_mask_replay_timer_timeout(pdev);
gl9750_wt_off(host);
}
@@ -806,7 +814,6 @@ static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock)
static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
{
struct pci_dev *pdev = slot->chip->pdev;
- int aer;
u32 value;
gl9755_wt_on(pdev);
@@ -841,12 +848,7 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
pci_set_power_state(pdev, PCI_D0);
/* mask the replay timer timeout of AER */
- aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
- if (aer) {
- pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
- value |= PCI_ERR_COR_REP_TIMER;
- pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
- }
+ sdhci_gli_mask_replay_timer_timeout(pdev);
gl9755_wt_off(pdev);
}
--
2.43.0
next prev parent reply other threads:[~2025-07-29 6:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-29 6:58 [PATCH V3 0/3] Mask the replay timer timeout of AER for GL9763e Victor Shih
2025-07-29 6:58 ` Victor Shih [this message]
2025-07-30 15:53 ` [PATCH V3 1/3] mmc: sdhci-pci-gli: Add a new function to simplify the code Adrian Hunter
2025-07-29 6:58 ` [PATCH V3 2/3] mmc: sdhci-pci-gli: GL9763e: Rename the gli_set_gl9763e() for consistency Victor Shih
2025-07-30 15:54 ` Adrian Hunter
2025-07-31 6:52 ` Victor Shih
2025-07-29 6:58 ` [PATCH V3 3/3] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER Victor Shih
2025-07-30 15:54 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250729065806.423902-2-victorshihgli@gmail.com \
--to=victorshihgli@gmail.com \
--cc=HL.Liu@genesyslogic.com.tw \
--cc=adrian.hunter@intel.com \
--cc=ben.chuang@genesyslogic.com.tw \
--cc=benchuanggli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=victor.shih@genesyslogic.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox