[PATCH v5 4/7] mmc: sdhci-esdhc-imx: add NXP S32N79 support

[Ciprian Costea <ciprianmarian.costea@oss.nxp.com>]

From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Add support for the uSDHC controller found in NXP S32N79 automotive SoCs,
which reuse the existing sdhci-esdhc-imx driver with slice difference.

Compared with s32g2/s32g3, needn't set ESDHC_FLAG_SKIP_CD_WAKE flag
because s32n79 does not have this limitation.

Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index a7a5df673b0f..28288fca87ff 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -321,6 +321,14 @@ static struct esdhc_soc_data usdhc_s32g2_data = {
 	.quirks = SDHCI_QUIRK_NO_LED,
 };
 
+static struct esdhc_soc_data usdhc_s32n79_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+			| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
+			| ESDHC_FLAG_SKIP_ERR004536,
+	.quirks = SDHCI_QUIRK_NO_LED,
+};
+
 static struct esdhc_soc_data usdhc_imx7ulp_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
@@ -408,6 +416,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = {
 	{ .compatible = "fsl,imx95-usdhc", .data = &usdhc_imx95_data, },
 	{ .compatible = "fsl,imxrt1050-usdhc", .data = &usdhc_imxrt1050_data, },
 	{ .compatible = "nxp,s32g2-usdhc", .data = &usdhc_s32g2_data, },
+	{ .compatible = "nxp,s32n79-usdhc", .data = &usdhc_s32n79_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
-- 
2.43.0