[PATCH v3 0/2] mmc: litex_mmc: Set mandatory idle clocks before CMD0

[Inochi Amaoto <inochiama@gmail.com>]

The litex_mmc driver assumes the card is already probed in the BIOS
and skip the phy initialization. This will cause the command fail
like the following when the old card is unplugged and then insert
a new card:

[   62.923593] litex-mmc f0004000.mmc: Command (cmd 8) error, status -110
[   62.949717] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[   62.976606] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[   63.002516] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[   63.028442] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110

Add required clock settings and initialization for the CMD 0, so it can
probe the new card.

Changed from v2:
- https://lore.kernel.org/linux-mmc/20260424013615.470325-1-inochiama@gmail.com/
1. Remove the added function forward reference and add a new patch
   for moving litex_mmc_setclk() function

Change from v1:
- https://lore.kernel.org/linux-mmc/20260421025052.755471-1-inochiama@gmail.com/
1. use fsleep to replace udelay

Inochi Amaoto (2):
  mmc: litex_mmc: Move litex_mmc_setclk() to bottom for reuse
  mmc: litex_mmc: Set mandatory idle clocks before CMD0

 drivers/mmc/host/litex_mmc.c | 37 ++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

--
2.54.0