public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
* (unknown), 
@ 2018-01-29 17:17 Jones
  0 siblings, 0 replies; 85+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)


This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2017-07-09 23:19 Corporate Lenders
  0 siblings, 0 replies; 85+ messages in thread
From: Corporate Lenders @ 2017-07-09 23:19 UTC (permalink / raw)


Schönen Tag,

Ich bin Thomas Walter, der Finanzagent dieser Firma, bekannt als Corporate Lenders. Wir leihen Geld für Einzelpersonen und Unternehmen, die finanzielle Hilfe benötigen. Hast du einen schlechten Kredit oder du brauchst Geld, um deine Rechnungen zu bezahlen? Wir verwenden dieses Medium, um Ihnen mitzuteilen, dass wir Ihnen bei jeder Form von Darlehen helfen können, wie Sie Refinanzierung, Schuldenkonsolidierung Darlehen, persönliche Darlehen, internationale Darlehen und Business-Darlehen. Wir freuen uns, Ihnen ein Darlehen so niedrig wie der Zinssatz von 3% anzubieten.

Unsere Mission ist es, unseren Kunden einen Service zu bieten, der schnell, freundlich und stressfrei ist. Normalerweise, wenn wir alle Ihre Informationen haben, dauert es nur eine Stunde, um die Genehmigung zu finanzieren.

Wenn Sie interessiert sind, füllen Sie bitte das Darlehensantragsformular aus.

Vollständiger Name:
Geschlecht:
Benötigte Menge:
Dauer:
Tel:
Sprich Englisch?

Wir warten auf Ihre Antwort.

Sie erreichen uns per E-Mail: info@corporatelendersonline.com
Mit freundlichen Grüßen,
Thomas Walter

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2017-04-17  0:43 John Ewalt
  0 siblings, 0 replies; 85+ messages in thread
From: John Ewalt @ 2017-04-17  0:43 UTC (permalink / raw)
  To: linux-mmc

Hi all,

I am not sure if this is the right way to ask a question about SD cards, so
please correct me as I am new to Linux kernel development.

I am currently working with a Intel Joule SOM and development board
(Broxton M core) and when I insert the SD card, it is recognized as a
SDR104 UHS-I card.  Since this host has the MMC_CAP_AGGRESSIVE_PM bit set,
it is suspended.  That all works as expected.  When the card is resumed,
the OCR is read expecting bit 24 (switch to 1.8 V accepted (S18A)) to be
set, but it is clear as the card is still at 1.8v signaling since it was
never powered down during the suspend.

I see 3 ways to solve this problem:
First, power down the card during suspend.  I think this is the intended
behavior but there is no power manager registered to this host (as
compiled) and I'm not sure how to add one, let alone the hardware changes
necessary to implement the powering down of the sd card.

Second, don't suspend (I have tested this and it works as the card is not
suspended)

Third, the host could remember that the card was at 1.8v signaling and if
it will not "switch" to 1.8v, assume it is at 1.8v and go through the
uhs_setup anyway.  I have tried this too and it works for UHS cards, but I
doubt it would be the right change.


I would appreciate any help or direction anyone can provide as I would
really like to use my fast card at the full data rates.  I am currently
setup to test any suggestions you have.

Thank you all,

-John

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown)
@ 2017-03-21  6:58 Piotr Sroka
  0 siblings, 0 replies; 85+ messages in thread
From: Piotr Sroka @ 2017-03-21  6:58 UTC (permalink / raw)
  To: Masahiro Yamada
  Cc: linux-mmc, Adrian Hunter, Ulf Hansson, Linux Kernel Mailing List,
	Piotr

Subject: RE: [v4 3/3] mmc: sdhci-cadence: Update PHY delay configuration
In-reply-to: <CAK7LNARTMF2F1_3QWqF87qV6FzeYHguWbRC5DEDnvYV1M-=9TQ@mail.gmail.com>
References: <1490008372-16372-1-git-send-email-piotrs@cadence.com> <1490008855-27135-1-git-send-email-piotrs@cadence.com> <CAK7LNARTMF2F1_3QWqF87qV6FzeYHguWbRC5DEDnvYV1M-=9TQ@mail.gmail.com>


Hi Masahiro 

2017-03-21 02:46 AM Masahiro Yamada <yamada.masahiro@socionext.com>:
> Hi Piotr,
> 
> 
> 2017-03-20 20:20 GMT+09:00 Piotr Sroka <piotrs@cadence.com>:
> > DTS properties are used instead of fixed data
> > because PHY settings can be different for different chips/boards.
> >
> > Signed-off-by: Piotr Sroka <piotrs@cadence.com>
> 
> 
> I found this version is a problem for me.
> 
> 
> > +
> > +static const struct sdhci_cdns_phy_cfg sdhci_cdns_phy_cfgs[] = {
> > +       { "cdns,phy-input-delay-sd-highspeed", SDHCI_CDNS_PHY_DLY_SD_HS, },
> > +       { "cdns,phy-input-delay-sd-legacy", SDHCI_CDNS_PHY_DLY_SD_DEFAULT, },
> > +       { "cdns,phy-input-delay-sd-uhs-sdr12", SDHCI_CDNS_PHY_DLY_UHS_SDR12, },
> > +       { "cdns,phy-input-delay-sd-uhs-sdr25", SDHCI_CDNS_PHY_DLY_UHS_SDR25, },
> > +       { "cdns,phy-input-delay-sd-uhs-sdr50", SDHCI_CDNS_PHY_DLY_UHS_SDR50, },
> > +       { "cdns,phy-input-delay-sd-uhs-ddr50", SDHCI_CDNS_PHY_DLY_UHS_DDR50, },
> > +       { "cdns,phy-input-delay-mmc-highspeed", SDHCI_CDNS_PHY_DLY_EMMC_SDR, },
> > +       { "cdns,phy-input-delay-mmc-ddr", SDHCI_CDNS_PHY_DLY_EMMC_DDR, },
> > +       { "cdns,phy-dll-delay-sdclk", SDHCI_CDNS_PHY_DLY_SDCLK, },
> > +       { "cdns,phy-dll-delay-sdclk-hsmmc", SDHCI_CDNS_PHY_DLY_HSMMC, },
> > +       { "cdns,phy-dll-delay-strobe", SDHCI_CDNS_PHY_DLY_STROBE, },
> > +};
> > +
> 
> 
> I see mmc-legacy property in v1,
> but it is missing now.
> 
> 
> >  static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
> >                                     u8 addr, u8 data)
> >  {
> > @@ -90,13 +113,26 @@ static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
> >         return 0;
> >  }
> >
> > -static void sdhci_cdns_phy_init(struct sdhci_cdns_priv *priv)
> > +static int sdhci_cdns_phy_init(struct device_node *np,
> > +                              struct sdhci_cdns_priv *priv)
> >  {
> > -       sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_HS, 4);
> > -       sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_DEFAULT, 4);
> > -       sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_LEGACY, 9);
> > -       sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_SDR, 2);
> > -       sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_DDR, 3);
> 
> 
> I need to set SDHCI_CDNS_PHY_DLY_EMMC_LEGACY to 9 for my SoC.
> 
> Maybe, do we need a DT property for this, too?
> 
I can add it but could you check if you realy need it? There is no selection MMC legacy mode
in this driver. 


Best Regards
Piotr Sroka

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2017-01-21 17:47 amit mahadik
  0 siblings, 0 replies; 85+ messages in thread
From: amit mahadik @ 2017-01-21 17:47 UTC (permalink / raw)
  To: linux-mmc

[-- Attachment #1: Type: text/plain, Size: 719 bytes --]

Hello,
          I am using ARM (CortexA9)development board which has SPI
controller running at 5MHz. I want to interface MMC card on SPI bus. I
have made changes to my board.c file to include the mmc_spi driver and
mentioned the Chip select, mode (MODE 0) and frequency of operation
(started with 40kHz tried with 25MHz as well). The initial card
detection goes well. However, there are CRC errors when the block
layer tries to read the partition table. This issue is reproducible.

I have attached log for reference. The card gets detected on
Linux/Windows PC. The card is formatted with DOS partition (vfat
single partition).

Linux kernel version Used : 4.4.16

Please help me regarding this issue.

Regards,
Amit.

[-- Attachment #2: log.txt --]
[-- Type: text/plain, Size: 58403 bytes --]

# modprobe mmc_core
# modprobe mmc_block
# modprobe mmc_spi



[ 1218.212971] mmc0: SPI card removed
[ 1218.255628] mmc0: clock 0Hz busmode 2 powermode 0 cs 1 Vdd 0 width 0 timing 0
[ 1218.255651] mmc_spi spi1.1: mmc_spi: power off (0)
[ 1250.267741] mmc0: clock 0Hz busmode 2 powermode 1 cs 1 Vdd 23 width 0 timing 0
[ 1250.267766] mmc_spi spi1.1: mmc_spi: power up (23)
[ 1250.267779] mmc_spi spi1.1: Initial signal voltage of 3.3v
[ 1250.285035] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.285058] mmc_spi spi1.1: mmc_spi: power on (23)
[ 1250.285306] mmc_spi spi1.1: setup: unsupported mode bits 4
[ 1250.290797] mmc_spi spi1.1: can't change chip-select polarity
[ 1250.296728] mmc_spi spi1.1: mmc_spi:  clock to 400000 Hz, 0
[ 1250.315041] mmc_spi spi1.1: SD/MMC host mmc0, no DMA, no WP, no poweroff
[ 1250.315078] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 1250.315091] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 1250.315109] mmc_spi spi1.1:   mmc_spi: CMD52, resp R2/R5
[ 1250.315779] mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
[ 1250.315795] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 1250.315809] mmc_spi spi1.1:   mmc_spi: CMD52, resp R2/R5
[ 1250.316443] mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
[ 1250.316457] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.316471] mmc_spi spi1.1:   mmc_spi: CMD0, resp R1
[ 1250.316586] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.317597] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 1250.317611] mmc_spi spi1.1:   mmc_spi: CMD8, resp R3/R4/R7
[ 1250.317740] mmc0: req done (CMD8): 0: 00000001 000001aa 00000000 00000000
[ 1250.317754] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 1250.317767] mmc_spi spi1.1:   mmc_spi: CMD5, resp R3/R4/R7
[ 1250.317890] mmc_spi spi1.1:   ... CMD5 response SPI_R3/R4/R: resp 0005 ffffffff
[ 1250.317906] mmc0: req done (CMD5): -38: 00000005 ffffffff 00000000 00000000
[ 1250.317921] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.317934] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.318048] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.318062] mmc0: starting CMD41 arg 00000000 flags 000000e1
[ 1250.318075] mmc_spi spi1.1:   mmc_spi: CMD41, resp R1
[ 1250.318189] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.318205] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.318218] mmc_spi spi1.1:   mmc_spi: CMD0, resp R1
[ 1250.318329] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.319340] mmc0: starting CMD58 arg 00000000 flags 00000280
[ 1250.319353] mmc_spi spi1.1:   mmc_spi: CMD58, resp R3/R4/R7
[ 1250.319482] mmc0: req done (CMD58): 0: 00000001 00ff8000 00000000 00000000
[ 1250.319496] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.319509] mmc_spi spi1.1:   mmc_spi: CMD0, resp R1
[ 1250.319622] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.320633] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 1250.320646] mmc_spi spi1.1:   mmc_spi: CMD8, resp R3/R4/R7
[ 1250.320774] mmc0: req done (CMD8): 0: 00000001 000001aa 00000000 00000000
[ 1250.320788] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.320801] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.320914] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.320928] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.320940] mmc_spi spi1.1:   mmc_spi: CMD41, resp R1
[ 1250.321052] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.335043] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.335080] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.336624] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.336650] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.336672] mmc_spi spi1.1:   mmc_spi: CMD41, resp R1
[ 1250.336799] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.355025] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.355049] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.355175] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.355195] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.355212] mmc_spi spi1.1:   mmc_spi: CMD41, resp R1
[ 1250.355330] mmc0: req done (CMD41): 0: 00000000 00000000 00000000 00000000
[ 1250.355352] mmc0: starting CMD10 arg 00000000 flags 000000b5
[ 1250.355367] mmc0:     blksz 16 blocks 1 flags 00000200 tsac 0 ms nsac 64
[ 1250.355384] mmc_spi spi1.1:   mmc_spi: CMD10, resp R1
[ 1250.355469] mmc_spi spi1.1:     mmc_spi: read block, 16 bytes
[ 1250.355672] mmc0: req done (CMD10): 0: 00000000 00000000 00000000 00000000
[ 1250.355686] mmc0:     16 bytes transferred: 0
[ 1250.355715] mmc0: starting CMD9 arg 00000000 flags 000000b5
[ 1250.355729] mmc0:     blksz 16 blocks 1 flags 00000200 tsac 0 ms nsac 64
[ 1250.355746] mmc_spi spi1.1:   mmc_spi: CMD9, resp R1
[ 1250.355830] mmc_spi spi1.1:     mmc_spi: read block, 16 bytes
[ 1250.356029] mmc0: req done (CMD9): 0: 00000000 00000000 00000000 00000000
[ 1250.356042] mmc0:     16 bytes transferred: 0
[ 1250.356063] mmc0: starting CMD55 arg 00000000 flags 00000095
[ 1250.356081] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.356198] mmc0: req done (CMD55): 0: 00000000 00000000 00000000 00000000
[ 1250.356219] mmc0: starting CMD51 arg 00000000 flags 000000b5
[ 1250.356233] mmc0:     blksz 8 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.356251] mmc_spi spi1.1:   mmc_spi: CMD51, resp R1
[ 1250.356333] mmc_spi spi1.1:     mmc_spi: read block, 8 bytes
[ 1250.356685] mmc0: req done (CMD51): 0: 00000000 00000000 00000000 00000000
[ 1250.356698] mmc0:     8 bytes transferred: 0
[ 1250.356720] mmc0: starting CMD55 arg 00000000 flags 00000095
[ 1250.356737] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.356854] mmc0: req done (CMD55): 0: 00000000 00000000 00000000 00000000
[ 1250.356873] mmc0: starting CMD13 arg 00000000 flags 000001b5
[ 1250.356887] mmc0:     blksz 64 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.356904] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.357024] mmc_spi spi1.1:     mmc_spi: read block, 64 bytes
[ 1250.357571] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.357585] mmc0:     64 bytes transferred: 0
[ 1250.357607] mmc0: starting CMD6 arg 00fffff0 flags 000000b5
[ 1250.357622] mmc0:     blksz 64 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.357639] mmc_spi spi1.1:   mmc_spi: CMD6, resp R1
[ 1250.357721] mmc_spi spi1.1:     mmc_spi: read block, 64 bytes
[ 1250.358341] mmc0: req done (CMD6): 0: 00000000 00000000 00000000 00000000
[ 1250.358355] mmc0:     64 bytes transferred: 0
[ 1250.358374] mmc0: starting CMD59 arg 00000001 flags 00000080
[ 1250.358392] mmc_spi spi1.1:   mmc_spi: CMD59, resp R1
[ 1250.358509] mmc0: req done (CMD59): 0: 00000000 00000000 00000000 00000000
[ 1250.358525] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1250.366575] mmc0: clock 5000000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.366597] mmc_spi spi1.1: mmc_spi:  clock to 5000000 Hz, 0
[ 1250.366627] mmc0: new SDHC card on SPI
[ 1250.371271] INDUS mmcblk0: mmc0:0000 SD 14.9 GiB
[ 1250.476901] mmc0: starting CMD18 arg 00000000 flags 000000b5
[ 1250.476923] mmc0:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[ 1250.476937] mmc0:     CMD12 arg 00000000 flags 00000095
[ 1250.476962] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.477060] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.482948] mmc_spi spi1.1: read - crc error: crc_val=0x2893, computed=0x6855 len=512
[ 1250.482964] mmc_spi spi1.1: read status -84
[ 1250.482978] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.483136] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.483220] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.488641] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.488659] mmc_spi spi1.1: read status -84
[ 1250.488674] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.488832] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.488917] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.494298] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.494312] mmc_spi spi1.1: read status -84
[ 1250.494326] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.494482] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.494567] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.499936] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.499953] mmc_spi spi1.1: read status -84
[ 1250.499968] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.500126] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.500211] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.505637] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.505654] mmc_spi spi1.1: read status -84
[ 1250.505668] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.505829] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.505914] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.511284] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.511299] mmc_spi spi1.1: read status -84
[ 1250.511313] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1
[ 1250.511435] mmc0: req done (CMD18): 0: 00000000 00000000 00000000 00000000
[ 1250.511449] mmc0:     0 bytes transferred: -84
[ 1250.511464] mmc0:     (CMD12): 0: 00000000 00000000 00000000 00000000
[ 1250.511492] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.511509] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.511632] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.511652] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1250.520748] mmc0: clock 0Hz busmode 2 powermode 0 cs 1 Vdd 0 width 0 timing 0
[ 1250.520767] mmc_spi spi1.1: mmc_spi: power off (0)
[ 1250.522782] mmc0: clock 0Hz busmode 2 powermode 1 cs 1 Vdd 23 width 0 timing 0
[ 1250.522798] mmc_spi spi1.1: mmc_spi: power up (23)
[ 1250.522811] mmc_spi spi1.1: Initial signal voltage of 3.3v
[ 1250.535027] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.535049] mmc_spi spi1.1: mmc_spi: power on (23)
[ 1250.535283] mmc_spi spi1.1: setup: unsupported mode bits 4
[ 1250.540771] mmc_spi spi1.1: can't change chip-select polarity
[ 1250.546560] mmc_spi spi1.1: mmc_spi:  clock to 400000 Hz, 0
[ 1250.565024] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.565047] mmc_spi spi1.1:   mmc_spi: CMD0, resp R1
[ 1250.565172] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.566189] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 1250.566207] mmc_spi spi1.1:   mmc_spi: CMD8, resp R3/R4/R7
[ 1250.566340] mmc0: req done (CMD8): 0: 00000001 000001aa 00000000 00000000
[ 1250.566360] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.566377] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.566495] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.566514] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.566530] mmc_spi spi1.1:   mmc_spi: CMD41, resp R1
[ 1250.566647] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.585029] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.585054] mmc_spi spi1.1:   mmc_spi: CMD55, resp R1
[ 1250.585179] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.585198] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.585216] mmc_spi spi1.1:   mmc_spi: CMD41, resp R1
[ 1250.585336] mmc0: req done (CMD41): 0: 00000000 00000000 00000000 00000000
[ 1250.585358] mmc0: starting CMD10 arg 00000000 flags 000000b5
[ 1250.585373] mmc0:     blksz 16 blocks 1 flags 00000200 tsac 0 ms nsac 64
[ 1250.585390] mmc_spi spi1.1:   mmc_spi: CMD10, resp R1
[ 1250.585475] mmc_spi spi1.1:     mmc_spi: read block, 16 bytes
[ 1250.585691] mmc0: req done (CMD10): 0: 00000000 00000000 00000000 00000000
[ 1250.585705] mmc0:     16 bytes transferred: 0
[ 1250.585727] mmc0: starting CMD59 arg 00000001 flags 00000080
[ 1250.585745] mmc_spi spi1.1:   mmc_spi: CMD59, resp R1
[ 1250.585864] mmc0: req done (CMD59): 0: 00000000 00000000 00000000 00000000
[ 1250.585885] mmc0: clock 5000000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.585902] mmc_spi spi1.1: mmc_spi:  clock to 5000000 Hz, 0
[ 1250.585916] mmc0: tried to reset card
[ 1250.589585] mmc0: starting CMD18 arg 00000000 flags 000000b5
[ 1250.589600] mmc0:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[ 1250.589614] mmc0:     CMD12 arg 00000000 flags 00000095
[ 1250.589631] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.589717] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.595141] mmc_spi spi1.1: read - crc error: crc_val=0x2817, computed=0x6855 len=512
[ 1250.595156] mmc_spi spi1.1: read status -84
[ 1250.595170] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.595328] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.595406] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.600786] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.600803] mmc_spi spi1.1: read status -84
[ 1250.600818] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.600977] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.601061] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.606475] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.606491] mmc_spi spi1.1: read status -84
[ 1250.606506] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.606668] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.606754] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.612077] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.612092] mmc_spi spi1.1: read status -84
[ 1250.612105] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.612262] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.612346] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.617699] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.617715] mmc_spi spi1.1: read status -84
[ 1250.617729] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.617887] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1250.617970] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.623330] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.623345] mmc_spi spi1.1: read status -84
[ 1250.623359] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1
[ 1250.623478] mmc0: req done (CMD18): 0: 00000000 00000000 00000000 00000000
[ 1250.623492] mmc0:     0 bytes transferred: -84
[ 1250.623507] mmc0:     (CMD12): 0: 00000000 00000000 00000000 00000000
[ 1250.623527] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.623545] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.623666] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.623686] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1250.632773] mmcblk0: retrying using single block read
[ 1250.637863] mmc0: starting CMD17 arg 00000000 flags 000000b5
[ 1250.637880] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.637899] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.637988] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.643351] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.643366] mmc_spi spi1.1: read status -84
[ 1250.643380] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.643536] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.643619] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.648944] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.648962] mmc_spi spi1.1: read status -84
[ 1250.648976] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.649134] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.649218] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.654576] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.654591] mmc_spi spi1.1: read status -84
[ 1250.654604] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.654761] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.654844] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.660221] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.660237] mmc_spi spi1.1: read status -84
[ 1250.660252] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.660410] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.660494] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.665901] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.665919] mmc_spi spi1.1: read status -84
[ 1250.665933] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.666094] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.666178] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.671502] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.671517] mmc_spi spi1.1: read status -84
[ 1250.671538] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.671552] mmc0:     0 bytes transferred: -84
[ 1250.671573] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.671592] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.671715] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.671735] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1250.680820] blk_update_request: 6 callbacks suppressed
[ 1250.685993] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 1250.692014] mmc0: starting CMD17 arg 00000001 flags 000000b5
[ 1250.692029] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.692050] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.692138] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.697495] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.697512] mmc_spi spi1.1: read status -84
[ 1250.697526] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.697684] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.697768] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.703148] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.703162] mmc_spi spi1.1: read status -84
[ 1250.703175] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.703332] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.703415] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.708733] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.708750] mmc_spi spi1.1: read status -84
[ 1250.708764] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.708921] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.709004] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.714382] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.714396] mmc_spi spi1.1: read status -84
[ 1250.714410] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.714566] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.714649] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.719996] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.720012] mmc_spi spi1.1: read status -84
[ 1250.720026] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.720183] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.720268] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.725642] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.725658] mmc_spi spi1.1: read status -84
[ 1250.725680] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.725693] mmc0:     0 bytes transferred: -84
[ 1250.725714] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.725732] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.725856] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.725875] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x0, card status 0x0
[ 1250.734927] blk_update_request: I/O error, dev mmcblk0, sector 1
[ 1250.740975] mmc0: starting CMD17 arg 00000002 flags 000000b5
[ 1250.740994] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.741017] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.741107] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.746491] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.746507] mmc_spi spi1.1: read status -84
[ 1250.746521] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.746678] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.746761] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.752110] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.752124] mmc_spi spi1.1: read status -84
[ 1250.752138] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.752294] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.752377] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.757742] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.757758] mmc_spi spi1.1: read status -84
[ 1250.757772] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.757930] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.758015] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.763360] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.763374] mmc_spi spi1.1: read status -84
[ 1250.763388] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.763545] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.763628] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.768985] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.769002] mmc_spi spi1.1: read status -84
[ 1250.769017] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.769174] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.769256] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.774618] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.774632] mmc_spi spi1.1: read status -84
[ 1250.774654] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.774667] mmc0:     0 bytes transferred: -84
[ 1250.774687] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.774704] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.774826] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.774847] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x0, card status 0x0
[ 1250.783936] blk_update_request: I/O error, dev mmcblk0, sector 2
[ 1250.789976] mmc0: starting CMD17 arg 00000003 flags 000000b5
[ 1250.789992] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.790011] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.790101] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.795474] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.795491] mmc_spi spi1.1: read status -84
[ 1250.795505] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.795665] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.795748] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.801072] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.801086] mmc_spi spi1.1: read status -84
[ 1250.801100] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.801256] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.801339] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.806717] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.806734] mmc_spi spi1.1: read status -84
[ 1250.806748] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.806908] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.806991] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.812349] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.812363] mmc_spi spi1.1: read status -84
[ 1250.812376] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.812532] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.812613] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.817974] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.817991] mmc_spi spi1.1: read status -84
[ 1250.818005] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.818163] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.818246] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.823586] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.823600] mmc_spi spi1.1: read status -84
[ 1250.823622] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.823635] mmc0:     0 bytes transferred: -84
[ 1250.823655] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.823673] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.823795] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.823816] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x0, card status 0x0
[ 1250.832905] blk_update_request: I/O error, dev mmcblk0, sector 3
[ 1250.838945] mmc0: starting CMD17 arg 00000004 flags 000000b5
[ 1250.838962] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.838982] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.839071] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.844408] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.844423] mmc_spi spi1.1: read status -84
[ 1250.844437] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.844595] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.844678] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.850063] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.850080] mmc_spi spi1.1: read status -84
[ 1250.850094] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.850251] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.850334] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.855731] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.855747] mmc_spi spi1.1: read status -84
[ 1250.855761] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.855917] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.855999] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.861366] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.861380] mmc_spi spi1.1: read status -84
[ 1250.861394] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.861550] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.861631] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.866990] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.867005] mmc_spi spi1.1: read status -84
[ 1250.867019] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.867175] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.867258] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.872554] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.872568] mmc_spi spi1.1: read status -84
[ 1250.872589] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.872602] mmc0:     0 bytes transferred: -84
[ 1250.872623] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.872640] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.872760] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.872779] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x0, card status 0x0
[ 1250.881859] blk_update_request: I/O error, dev mmcblk0, sector 4
[ 1250.887900] mmc0: starting CMD17 arg 00000005 flags 000000b5
[ 1250.887917] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.887936] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.888026] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.893388] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.893403] mmc_spi spi1.1: read status -84
[ 1250.893417] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.893572] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.893655] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.899039] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.899055] mmc_spi spi1.1: read status -84
[ 1250.899070] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.899226] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.899310] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.904649] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.904664] mmc_spi spi1.1: read status -84
[ 1250.904678] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.904834] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.904915] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.910262] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.910279] mmc_spi spi1.1: read status -84
[ 1250.910293] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.910449] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.910532] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.915913] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.915930] mmc_spi spi1.1: read status -84
[ 1250.915945] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.916104] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.916189] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.921519] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.921534] mmc_spi spi1.1: read status -84
[ 1250.921556] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.921569] mmc0:     0 bytes transferred: -84
[ 1250.921591] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.921608] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.921729] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.921749] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x0, card status 0x0
[ 1250.930837] blk_update_request: I/O error, dev mmcblk0, sector 5
[ 1250.936874] mmc0: starting CMD17 arg 00000006 flags 000000b5
[ 1250.936890] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.936910] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.937000] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.942366] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.942381] mmc_spi spi1.1: read status -84
[ 1250.942395] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.942551] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.942634] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.947989] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.948005] mmc_spi spi1.1: read status -84
[ 1250.948019] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.948177] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.948260] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.953618] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.953633] mmc_spi spi1.1: read status -84
[ 1250.953646] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.953801] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.953883] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.959224] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.959241] mmc_spi spi1.1: read status -84
[ 1250.959255] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.959413] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.959496] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.964853] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.964867] mmc_spi spi1.1: read status -84
[ 1250.964880] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.965074] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.965163] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.970510] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.970526] mmc_spi spi1.1: read status -84
[ 1250.970548] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.970561] mmc0:     0 bytes transferred: -84
[ 1250.970582] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.970600] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1250.970720] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.970740] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x0, card status 0x0
[ 1250.979825] blk_update_request: I/O error, dev mmcblk0, sector 6
[ 1250.985862] mmc0: starting CMD17 arg 00000007 flags 000000b5
[ 1250.985877] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.985897] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.985986] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.991321] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1250.991335] mmc_spi spi1.1: read status -84
[ 1250.991349] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.991506] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.991588] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1250.997001] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1250.997018] mmc_spi spi1.1: read status -84
[ 1250.997033] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1250.997192] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1250.997276] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.002625] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.002641] mmc_spi spi1.1: read status -84
[ 1251.002654] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.002812] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.002896] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.008222] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.008240] mmc_spi spi1.1: read status -84
[ 1251.008254] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.008411] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.008496] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.013848] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.013862] mmc_spi spi1.1: read status -84
[ 1251.013875] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.014029] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.014111] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.019464] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.019480] mmc_spi spi1.1: read status -84
[ 1251.019503] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.019517] mmc0:     0 bytes transferred: -84
[ 1251.019538] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.019557] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.019679] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.019700] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x0, card status 0x0
[ 1251.028785] blk_update_request: I/O error, dev mmcblk0, sector 7
[ 1251.034804] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1251.042099] mmc0: starting CMD18 arg 00000000 flags 000000b5
[ 1251.042118] mmc0:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[ 1251.042132] mmc0:     CMD12 arg 00000000 flags 00000095
[ 1251.042153] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1251.042245] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.047570] mmc_spi spi1.1: read - crc error: crc_val=0x2800, computed=0x6855 len=512
[ 1251.047588] mmc_spi spi1.1: read status -84
[ 1251.047602] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.047759] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1251.047843] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.053180] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.053194] mmc_spi spi1.1: read status -84
[ 1251.053208] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.053363] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1251.053447] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.058822] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.058839] mmc_spi spi1.1: read status -84
[ 1251.058853] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.059012] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1251.059095] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.064441] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.064455] mmc_spi spi1.1: read status -84
[ 1251.064469] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.064626] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1251.064709] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.070119] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.070136] mmc_spi spi1.1: read status -84
[ 1251.070150] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.070308] mmc_spi spi1.1:   mmc_spi: CMD18, resp R1
[ 1251.070393] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.075752] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.075768] mmc_spi spi1.1: read status -84
[ 1251.075783] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1
[ 1251.075907] mmc0: req done (CMD18): 0: 00000000 00000000 00000000 00000000
[ 1251.075922] mmc0:     0 bytes transferred: -84
[ 1251.075936] mmc0:     (CMD12): 0: 00000000 00000000 00000000 00000000
[ 1251.075964] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.075982] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.076105] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.076126] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1251.085211] mmcblk0: retrying using single block read
[ 1251.090271] mmc0: starting CMD17 arg 00000000 flags 000000b5
[ 1251.090287] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.090308] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.090399] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.095841] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.095858] mmc_spi spi1.1: read status -84
[ 1251.095873] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.096030] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.096114] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.101464] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.101478] mmc_spi spi1.1: read status -84
[ 1251.101492] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.101650] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.101733] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.107047] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.107063] mmc_spi spi1.1: read status -84
[ 1251.107077] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.107236] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.107320] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.112707] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.112721] mmc_spi spi1.1: read status -84
[ 1251.112734] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.112889] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.112972] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.118357] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.118373] mmc_spi spi1.1: read status -84
[ 1251.118387] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.118543] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.118626] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.123979] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.123994] mmc_spi spi1.1: read status -84
[ 1251.124015] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.124028] mmc0:     0 bytes transferred: -84
[ 1251.124049] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.124067] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.124188] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.124208] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1251.133295] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 1251.139333] mmc0: starting CMD17 arg 00000001 flags 000000b5
[ 1251.139349] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.139369] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.139460] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.144758] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.144773] mmc_spi spi1.1: read status -84
[ 1251.144787] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.144944] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.145060] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.150387] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.150403] mmc_spi spi1.1: read status -84
[ 1251.150418] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.150575] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.150658] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.156034] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.156050] mmc_spi spi1.1: read status -84
[ 1251.156064] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.156222] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.156305] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.161692] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.161706] mmc_spi spi1.1: read status -84
[ 1251.161720] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.161876] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.161959] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.167304] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.167321] mmc_spi spi1.1: read status -84
[ 1251.167335] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.167493] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.167576] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.172912] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.172927] mmc_spi spi1.1: read status -84
[ 1251.172949] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.172963] mmc0:     0 bytes transferred: -84
[ 1251.172983] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.173001] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.173122] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.173143] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x0, card status 0x0
[ 1251.182231] blk_update_request: I/O error, dev mmcblk0, sector 1
[ 1251.188280] mmc0: starting CMD17 arg 00000002 flags 000000b5
[ 1251.188297] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.188318] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.188406] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.193777] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.193791] mmc_spi spi1.1: read status -84
[ 1251.193805] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.193960] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.194043] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.199377] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.199394] mmc_spi spi1.1: read status -84
[ 1251.199409] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.199567] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.199649] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.205033] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.205050] mmc_spi spi1.1: read status -84
[ 1251.205064] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.205226] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.205311] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.210702] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.210718] mmc_spi spi1.1: read status -84
[ 1251.210731] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.210886] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.210968] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.216367] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.216383] mmc_spi spi1.1: read status -84
[ 1251.216397] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.216554] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.216637] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.221959] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.221974] mmc_spi spi1.1: read status -84
[ 1251.221996] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.222009] mmc0:     0 bytes transferred: -84
[ 1251.222029] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.222047] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.222168] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.222188] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x0, card status 0x0
[ 1251.231278] mmc0: starting CMD17 arg 00000003 flags 000000b5
[ 1251.231296] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.231318] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.231410] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.236819] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.236836] mmc_spi spi1.1: read status -84
[ 1251.236850] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.237006] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.237089] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.242455] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.242470] mmc_spi spi1.1: read status -84
[ 1251.242483] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.242638] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.242720] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.248074] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.248091] mmc_spi spi1.1: read status -84
[ 1251.248105] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.248262] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.248344] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.253704] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.253718] mmc_spi spi1.1: read status -84
[ 1251.253732] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.253887] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.253970] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.259321] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.259337] mmc_spi spi1.1: read status -84
[ 1251.259351] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.259507] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.259590] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.264944] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.264958] mmc_spi spi1.1: read status -84
[ 1251.265016] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.265034] mmc0:     0 bytes transferred: -84
[ 1251.265059] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.265078] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.265202] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.265223] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x0, card status 0x0
[ 1251.274281] mmc0: starting CMD17 arg 00000004 flags 000000b5
[ 1251.274297] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.274316] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.274402] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.279721] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.279738] mmc_spi spi1.1: read status -84
[ 1251.279752] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.279910] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.279993] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.285401] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.285417] mmc_spi spi1.1: read status -84
[ 1251.285431] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.285589] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.285672] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.291022] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.291036] mmc_spi spi1.1: read status -84
[ 1251.291050] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.291205] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.291286] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.296641] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.296657] mmc_spi spi1.1: read status -84
[ 1251.296670] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.296827] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.296911] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.302271] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.302286] mmc_spi spi1.1: read status -84
[ 1251.302300] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.302455] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.302537] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.307891] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.307907] mmc_spi spi1.1: read status -84
[ 1251.307929] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.307942] mmc0:     0 bytes transferred: -84
[ 1251.307963] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.307981] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.308104] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.308123] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x0, card status 0x0
[ 1251.317214] mmc0: starting CMD17 arg 00000005 flags 000000b5
[ 1251.317233] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.317255] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.317346] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.322669] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.322685] mmc_spi spi1.1: read status -84
[ 1251.322699] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.322855] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.322937] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.328315] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.328331] mmc_spi spi1.1: read status -84
[ 1251.328344] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.328502] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.328585] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.333920] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.333934] mmc_spi spi1.1: read status -84
[ 1251.333948] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.334105] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.334187] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.339555] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.339572] mmc_spi spi1.1: read status -84
[ 1251.339586] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.339743] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.339827] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.345179] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.345194] mmc_spi spi1.1: read status -84
[ 1251.345212] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.345366] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.345452] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.350829] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.350844] mmc_spi spi1.1: read status -84
[ 1251.350866] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.350879] mmc0:     0 bytes transferred: -84
[ 1251.350899] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.350917] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.351039] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.351059] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x0, card status 0x0
[ 1251.360157] mmc0: starting CMD17 arg 00000006 flags 000000b5
[ 1251.360175] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.360197] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.360286] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.365666] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.365682] mmc_spi spi1.1: read status -84
[ 1251.365696] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.365856] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.365940] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.371243] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.371258] mmc_spi spi1.1: read status -84
[ 1251.371273] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.371430] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.371512] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.376893] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.376910] mmc_spi spi1.1: read status -84
[ 1251.376924] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.377081] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.377165] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.382510] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.382525] mmc_spi spi1.1: read status -84
[ 1251.382539] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.382697] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.382780] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.388130] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.388146] mmc_spi spi1.1: read status -84
[ 1251.388160] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.388317] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.388401] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.393751] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.393766] mmc_spi spi1.1: read status -84
[ 1251.393787] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.393800] mmc0:     0 bytes transferred: -84
[ 1251.393820] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.393837] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.393959] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.393980] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x0, card status 0x0
[ 1251.403073] mmc0: starting CMD17 arg 00000007 flags 000000b5
[ 1251.403091] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.403113] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.403206] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.408549] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.408565] mmc_spi spi1.1: read status -84
[ 1251.408580] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.408737] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.408820] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.414155] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.414170] mmc_spi spi1.1: read status -84
[ 1251.414183] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.414338] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.414421] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.419751] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.419769] mmc_spi spi1.1: read status -84
[ 1251.419783] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.419940] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.420023] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.425394] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.425410] mmc_spi spi1.1: read status -84
[ 1251.425424] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.425583] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.425667] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.430989] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.431003] mmc_spi spi1.1: read status -84
[ 1251.431017] mmc_spi spi1.1:   mmc_spi: CMD12, resp R1B
[ 1251.431174] mmc_spi spi1.1:   mmc_spi: CMD17, resp R1
[ 1251.431257] mmc_spi spi1.1:     mmc_spi: read block, 512 bytes
[ 1251.436628] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.436644] mmc_spi spi1.1: read status -84
[ 1251.436667] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.436680] mmc0:     0 bytes transferred: -84
[ 1251.436701] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.436719] mmc_spi spi1.1:   mmc_spi: CMD13, resp R2/R5
[ 1251.436844] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.436864] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x0, card status 0x0
[ 1251.445962] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1251.453134]  mmcblk0: unable to read partition table
#


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown)
@ 2015-04-29 20:47 Angelo Dureghello
  0 siblings, 0 replies; 85+ messages in thread
From: Angelo Dureghello @ 2015-04-29 20:47 UTC (permalink / raw)
  To: linux-mmc

unsubscribe linux-mmc angelo@sysam.it


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2014-05-23  2:50 Wang, Yalin
  0 siblings, 0 replies; 85+ messages in thread
From: Wang, Yalin @ 2014-05-23  2:50 UTC (permalink / raw)
  To: 'linux-mmc@vger.kernel.org',
	'linux-arch-owner@vger.kernel.org', 'Will Deacon'


Hi

I have a problems that I want create a watchpoint to monitor a data for
Debug in kernel , but I don't know how to do it ,
I try the kprobes , but seems it only support create .text section probe ,
Can't monitor data access ,  then  I try  perf_event_create to create a hardware 
Data watchpoint , it can work , but has a problem:
When the data access hit , I don't know how to bypass this time's watchpoint ,
This need simulate the data access  or step the break instructions in data abort 
Exception handler ,  seems kernel don't provide these for perf_event ..

I test this on ARM arch , 
My question is that how to create data watchpoint in kernel ?
It there some modules  have implemented this ?

Thanks


Sony Mobile Communications
Tel: My Number +18610323092
yalin.wang@sonymobile.com  (shall be a link, optional part)

sonymobile.com




^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2013-10-17  2:48 remittance2013@hotmail.comContact
  0 siblings, 0 replies; 85+ messages in thread
From: remittance2013@hotmail.comContact @ 2013-10-17  2:48 UTC (permalink / raw)




-- 
Dear beneficiary,This is to re-notify you of the $300,000.00 USD that was depositedhere in the western union office in your name is available for pickup.Contact us via email for your M.T.C.N Numbers.Contact Person:Mr. ben c johnEmail: remittance2013@hotmail.comContact Phone : +44 7024043572

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2013-09-19  1:04 Loan Offer
  0 siblings, 0 replies; 85+ messages in thread
From: Loan Offer @ 2013-09-19  1:04 UTC (permalink / raw)


-- 
Are You In Need Of money to pay your bills or to start any kind of
Business? If Yes; Contact us via: richard.fast.loancompany1@gmail.com
Full Name:
Amount Needed:
Duration:
Country:
Cell No:
Sex:
Age:
Noted that all email should been send to Mr Richard Fast on this
email: richard.fast.loancompany1@gmail.com

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2012-09-28 10:28 yongd
  0 siblings, 0 replies; 85+ messages in thread
From: yongd @ 2012-09-28 10:28 UTC (permalink / raw)
  To: Chris Ball, Anton Vorontsov, Marek Szyprowski, Shawn Guo,
	Wolfram Sang, Daniel Drake, Sascha Hauer, Wilson Callan,
	Ben Dooks
  Cc: zhangfei.gao, kevin.liu, jlfu, linux-mmc, linux-kernel

ngd@marvell.com> # This line is ignored.
From: yongd <yongd@marvell.com>
Subject:[PATCH 0/3] mmc: enable card-detection polling in host driver rather than in sdhci_add_host
In-Reply-To:


Hi all,
As checked, SDHCI_QUICK_BROKEN_CARD_DETECTION was previously introduced by Anton Vorontsov in commit
68d1fb7e229c6f95be4fbbe3eb46b24e41184924. For a removable card (MMC_CAP_NONREMOVABLE is not set),
if this QUICK is set, sdhci_add_host will set MMC_CAP_NEEDS_POLL to enable card-detection polling method,
and sdhci_set_card_detection will not enable host controller card insert/remove interrupts (the host
internal card detection method).

However, we can have some other card detection methods besides host internal card detection and polling
methods. For example, we might use an external GPIO pin for detection. In such case, we will not set
MMC_CAP_NONREMOVABLE since removable, and set SDHCI_QUICK_BROKEN_CARD_DETECTION since we don't use controller
card insert/remove interrupts. But unexpectedly, sdhci_add_host will still enable polling for us. This
is redundant.

So, here comes the following solution.
1st, enable card-detection polling in vendor host driver itself so that it will not rely on sdhci_add_host.
 [PATCH 1/3]: for sdhci-esdhc-imx.c
 [PATCH 2/3]: for sdhci-s3c.c
 And for other vendor host drivers(sdhci-pxav2/3.c, sdhci-pci.c, sdhci-of-esdhc.c), as checked, those who
set SDHCI_QUICK_BROKEN_CARD_DETECTION actually do not set this for enabling polling. So no similar change is          
needed.

2nd, remove MMC_CAP_NEEDS_POLL setting in sdhci_add_host, as in [PATCH 3/3].

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Actually I have had some discussion with Anton, and now added more reviewers here since my proposal influences
others. I will appreciate your review and comments. Thanks a lot:-)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2012-09-18  4:52 Mr. Beuker Hendrik
  0 siblings, 0 replies; 85+ messages in thread
From: Mr. Beuker Hendrik @ 2012-09-18  4:52 UTC (permalink / raw)



UBS International Holdings BV
Herengracht 600
NL-1017 CJ Amsterdam, Netherlands.
www.ubs.com/investmentbank


I have a business proposal of ($8.5 million) Eight million, five Hundred
thousand
Dollars only to transfer with you, if interested to get back to me.

At this moment I will not be able to issue more details about this
business, until your response is received.

Email:hendrik_mr.beuker@yahoo.com.hk

Warmest Regards,
Mr. Beuker Hendrik
Investment Consultant.
UBS.






^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2012-09-07  0:12 Allen and Violet Large
  0 siblings, 0 replies; 85+ messages in thread
From: Allen and Violet Large @ 2012-09-07  0:12 UTC (permalink / raw)



Dear Sir/Madam,

This is my fifth times of writting you this email since last year till
date but no response from you.Hope you get this one, as this is a personal
email directed to you. My wife and I won a Jackpot Lottery of $11.3 million
in July and have voluntarily decided to donate the sum of $500,000.00 USD
to you as part of our own charity project to improve the lot of 10 lucky
individuals all over the world. If you have received this email then you
are one of the lucky recipients and all you have to do is get back with us
so that we can send your details to the payout bank.Please note that you
have to contact my private email for more
informations(allen.andvioletlarge@yahoo.ie)

You can verify this by visiting the web pages below.

http://www.dailymail.co.uk/news/article-1326473/Canadian-couple-Allen-Violet-Large-away-entire-11-2m-lottery-win.html


Goodluck,
Allen and Violet Large
Email:allen.andvioletlarge@yahoo.ie





----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2012-09-06 12:23 MR.TAN WONG
  0 siblings, 0 replies; 85+ messages in thread
From: MR.TAN WONG @ 2012-09-06 12:23 UTC (permalink / raw)
  To: info.rowanc


FROM:MR.TAN WONG

(tan.wong222@yahoo.com.hk)Let me start by introducing myself. I am Mr. Tan Wong director of operations of the Hang Seng Bank Ltd. I have an obscured business suggestion for you. That will be a great benefit for you and me. It involve the transfer of Twenty Four millions Five Hundred Thousand United State Dollar($24,500,000,00) deposit in my bank So, Twenty Four millions Five Hundred Thousand United State Dollar($24,500,000,00) is still lying in my bank and no one will ever come forward to claim it. What bothers me most is that according to the laws of my country at the expiration 8years the funds will revert to the ownership of the Hong Kong Government if nobody applies to claim the funds. Against this backdrop, my suggestion to you is that I will like you as a foreigner to stand as the next of kin to Major Fadi Basem so that you will be able to receive his funds.Transfer. Should you be interested please send me your full names and current residential address and I will prefer you to reach me on this email address (tan.wong222@yahoo.com.hk) which is my private email address and finally after that I shall provide you with more details of this operation.Your earliest response to this letter will be appreciated. Kind Regards, Mr.Tan Wong.

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2012-08-09  6:55 Lee Susman
  0 siblings, 0 replies; 85+ messages in thread
From: Lee Susman @ 2012-08-09  6:55 UTC (permalink / raw)
  To: axboe, linux-mmc; +Cc: tlinder

Hello all,

I ran into some difficulty with Btreplay, maybe you could help me:
I am trying to emulate async write requests using Btreplay, but it seems
that Btreplay submits only sync writes.
I could not find any reference in the code as to manipulating this option.

I would appreciate your help.

Thanks,
-- 
Lee Susman,
Consultant for Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2012-03-31 14:44 jin mong
  0 siblings, 0 replies; 85+ messages in thread
From: jin mong @ 2012-03-31 14:44 UTC (permalink / raw)


Greetings Partner,

This is my second time of sending you this notice. I have finally found
you as an approved heir to the inheritance of the deposited funds with
same surname of the deceased depositor.

Jin Mong
Email: jinmong22@yahoo.co.jp


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-12-05  9:14 r66093
  0 siblings, 0 replies; 85+ messages in thread
From: r66093 @ 2011-12-05  9:14 UTC (permalink / raw)
  To: linux-mmc



^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-10-31 14:47 ygardi
  0 siblings, 0 replies; 85+ messages in thread
From: ygardi @ 2011-10-31 14:47 UTC (permalink / raw)
  To: to; +Cc: a_ygardi

subscribe linux-mmc

thanks,
Yaniv


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-10-31  8:49 merez
  0 siblings, 0 replies; 85+ messages in thread
From: merez @ 2011-10-31  8:49 UTC (permalink / raw)
  To: linux-mmc

subscribe linux-mmc


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown)
@ 2011-10-31  7:43 Bar Yasser
  0 siblings, 0 replies; 85+ messages in thread
From: Bar Yasser @ 2011-10-31  7:43 UTC (permalink / raw)



I am Bar Yasser, I have a very important Business matters i will like to
discuss with you.If this your Email is valid Contact me through my personal
email:rawashdeh.asseral11@w.cn Thank you Mr. Yasser Al



^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-09-22 11:10 Girish K S
  2011-09-22 11:10 ` (unknown), Girish K S
  0 siblings, 1 reply; 85+ messages in thread
From: Girish K S @ 2011-09-22 11:10 UTC (permalink / raw)
  To: linux-mmc; +Cc: cjb, kgene.kim, patches, linux-samsung-soc, Girish K S

This patch adds the support for power off notify feature
available in eMMC 4.5 devices.
	If the the host has support for this feature, then the
mmc core will notify it to the device by setting the
POWER_OFF_NOTIFICATION byte in the extended csd register
with a value 1(POWER_ON).
	This patch should be applied after Seungwon Jeon's
patch for cmd6 timeout.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
---
 v2:
 adds poweroff notification handling in suspend/normal
 v4:
 updated with review comments of Jeon
 v5:
 This patch version fixes the problem with power off
 notify function, when called for the first time and
 card is not yet initialised.
 v6:
 fixes checkpatch errors. The patches are generated after
 rebasing to chris's mmc-next branch.
 
 drivers/mmc/core/mmc.c   |   17 +++++++++++++++++
 include/linux/mmc/card.h |    1 +
 include/linux/mmc/host.h |    1 +
 include/linux/mmc/mmc.h  |    6 ++++++
 4 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 7adc30d..a547f49 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -412,6 +412,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	else
 		card->erased_byte = 0x0;
 
+	if (card->ext_csd.rev >= 6) {
+		card->ext_csd.power_off_longtime = 10 *
+			ext_csd[EXT_CSD_POWER_OFF_LONG_TIME];
+	}
 out:
 	return err;
 }
@@ -713,6 +717,19 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
+	 * If the host supports the power_off_notify capability then
+	 * set the notification byte in the ext_csd register of device
+	 */
+	if (host->caps & MMC_CAP_POWER_OFF_NOTIFY) {
+		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+				EXT_CSD_POWER_OFF_NOTIFICATION,
+				EXT_CSD_POWER_ON,
+				card->ext_csd.generic_cmd6_time);
+		if (err && err != -EBADMSG)
+			goto free_card;
+	}
+
+	/*
 	 * Activate high speed (if supported)
 	 */
 	if ((card->ext_csd.hs_max_dtr != 0) &&
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 5294ddf..0f9dbd6 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -53,6 +53,7 @@ struct mmc_ext_csd {
 	u8			rst_n_function;
 	unsigned int		part_time;		/* Units: ms */
 	unsigned int		sa_timeout;		/* Units: 100ns */
+	unsigned int		power_off_longtime;	/* Units: ms */
 	unsigned int		hs_max_dtr;
 	unsigned int		sectors;
 	unsigned int		card_type;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index b2aefea..ed49e88 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -235,6 +235,7 @@ struct mmc_host {
 #define MMC_CAP_MAX_CURRENT_800	(1 << 29)	/* Host max current limit is 800mA */
 #define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
 #define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
+#define MMC_CAP_POWER_OFF_NOTIFY    (1 << 31)/*Notify poweroff supported */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index ed8fca8..95912da 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -270,6 +270,7 @@ struct _mmc_csd {
  * EXT_CSD fields
  */
 
+#define EXT_CSD_POWER_OFF_NOTIFICATION	34 /* R/W */
 #define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
 #define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
 #define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
@@ -294,6 +295,7 @@ struct _mmc_csd {
 #define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
 #define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
 #define EXT_CSD_TRIM_MULT		232	/* RO */
+#define EXT_CSD_POWER_OFF_LONG_TIME	247 /*RO*/
 
 /*
  * EXT_CSD field definitions
@@ -331,6 +333,10 @@ struct _mmc_csd {
 
 #define EXT_CSD_RST_N_EN_MASK	0x3
 #define EXT_CSD_RST_N_ENABLED	1	/* RST_n is enabled on card */
+#define EXT_CSD_NO_POWER_NOTIFICATION	0
+#define EXT_CSD_POWER_ON	1
+#define EXT_CSD_POWER_OFF_SHORT	2
+#define EXT_CSD_POWER_OFF_LONG	3
 
 /*
  * MMC_SWITCH access modes
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-06-17  3:35 Mr. Vincent Cheng
  0 siblings, 0 replies; 85+ messages in thread
From: Mr. Vincent Cheng @ 2011-06-17  3:35 UTC (permalink / raw)


Good Day,

I am Mr. Vincent Cheng Hoi Chuen, GBS, JP Chairman of the Hong Kong and
Shanghai Banking Corporation Limited.i have a business proposal of Twenty
Two million Five Hundred Thousand United State Dollars only for you to 
transact with me from my bank to your country.

All confirmable documents to back up the claims will be made available to
you prior to your acceptance and as soon as I receive your return mail and
I will let you know what is required of you.

Your earliest response to this letter will be appreciated.

Best Regards,
Mr. Vincent Cheng


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-06-15  4:27 Microsoft Promotion Award Team
  0 siblings, 0 replies; 85+ messages in thread
From: Microsoft Promotion Award Team @ 2011-06-15  4:27 UTC (permalink / raw)




Your Email Id has won 500,000GBP in the Microsoft Promotion Award 2011.
send us the following informations

Full Names:
Residential Address:
Occupation:
Age:
Phone:

to our claims department:email: Mr.Rynold Mohd, microaward@blumail.org



^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2011-05-16 23:30 Greg Moore
  0 siblings, 0 replies; 85+ messages in thread
From: Greg Moore @ 2011-05-16 23:30 UTC (permalink / raw)


I Am   Greg Moore. A legitimate & accredited Loan lender. We give out loan of all kinds in a very fast and easy way, Personal Loan, Car Loan, Home Loan, Student Loan, Business Loan, Inventor loan, Debt Consolidation. get back to us if interested














I Am   Greg Moore. A legitimate & accredited Loan lender. We give out loan of all kinds in a very fast and easy way, Personal Loan, Car Loan, Home Loan, Student Loan, Business Loan, Inventor loan, Debt Consolidation. get back to us if interested





I Am   Greg Moore. A legitimate & accredited Loan lender. We give out loan of all kinds in a very fast and easy way, Personal Loan, Car Loan, Home Loan, Student Loan, Business Loan, Inventor loan, Debt Consolidation. get back to us if interested














I Am   Greg Moore. A legitimate & accredited Loan lender. We give out loan of all kinds in a very fast and easy way, Personal Loan, Car Loan, Home Loan, Student Loan, Business Loan, Inventor loan, Debt Consolidation. get back to us if interested













I Am   Greg Moore. A legitimate & accredited Loan lender. We give out loan of all kinds in a very fast and easy way, Personal Loan, Car Loan, Home Loan, Student Loan, Business Loan, Inventor loan, Debt Consolidation. get back to us if interested







I Am   Greg Moore. A legitimate & accredited Loan lender. We give out loan of all kinds in a very fast and easy way, Personal Loan, Car Loan, Home Loan, Student Loan, Business Loan, Inventor loan, Debt Consolidation. get back to us if interested

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), , 
@ 2010-11-16 13:59 Ming-Yang Lee
  0 siblings, 0 replies; 85+ messages in thread
From: Ming-Yang Lee @ 2010-11-16 13:59 UTC (permalink / raw)




Do you need a loan to pay your bills or to start up a business or for Xmas?.
Kindly apply now for a low rate loan of 3%. for more information contact:
ming.yangfundsservice@qatar.io
We Await Your Response.
Mr Ming-Yang Lee

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown)
@ 2010-08-21 16:19 Award Promo
  0 siblings, 0 replies; 85+ messages in thread
From: Award Promo @ 2010-08-21 16:19 UTC (permalink / raw)



Your email id has won £1,000,000.00. in the Uk award promo,send your
Names...
Address...
Tel...

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-07-28  6:02 Roy Zang
  0 siblings, 0 replies; 85+ messages in thread
From: Roy Zang @ 2010-07-28  6:02 UTC (permalink / raw)
  To: linux-mmc

This serial patch adds some workarounds to enable mmc card
support for P4080 chip.


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-07-17  8:06 Grant Mayor
  0 siblings, 0 replies; 85+ messages in thread
From: Grant Mayor @ 2010-07-17  8:06 UTC (permalink / raw)


FUNDING NOTIFICATION.............I am Mr Grant Mayor. i am a loan lender
as well as an angel investor, I offer funds based on demands and i use the
best possible interest rate so that it can make both paties smile. I allow
my clients to decide the loan repayment duration. So i have my door for
funding opened to all that is in need, If you have been turned down be
many financial institutions, this is a great time for you to make things
up. If you need a stress free funing, kindly get back to me with a mail of
application for funding and you will get funded within 3 working days.
Send all mails of application to: to.grantfinancing@gmail.com.

I await your response.

Grant Mayor.


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown)
@ 2010-06-05 17:29 Michał Mirosław 
  2010-06-05 17:29 ` (unknown) Michał Mirosław 
  2010-06-05 17:29 ` (unknown) Michał Mirosław 
  0 siblings, 2 replies; 85+ messages in thread
From: Michał Mirosław  @ 2010-06-05 17:29 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-mmc, linux-kernel, Adrian Hunter, Chris Ball

From 46eda5101dd303feac7f8353023f78bf4f7fd2fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= <mirq-linux@rere.qmqm.pl>
Date: Sat, 5 Jun 2010 19:04:01 +0200
Subject: [PATCH 0/2] mmc: Add support for SD combo cards
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This adds support for SD combo cards to MMC/SD driver stack.

SD combo consists of SD memory and SDIO parts in one package. Since
the parts have a separate SD command sets, after initialization, they
can be treated as independent cards on one bus.

Changes are divided into two patches. First is just moving initialization
code around so that SD memory part init can be called from SDIO init.
Second patch is a proper change enabling SD memory along SDIO.
I tried to move as much no-op changes to the first patch so that it's
easier to follow the required changes to initialization flow for SDIO cards.

This is based on Simplified SDIO spec v.2.00. The init sequence is slightly
modified to follow current SD memory init implementation. Command sequences,
assuming SD memory and SDIO indeed ignore unknown commands, are the same as
before for both parts.

Changes from v1:
 - more no-op changes moved to first patch
 - eliminated internal abuse of EOPNOTSUPP
 - fixed a bug in resume path (not tested)
 - eliminated unnecessary CID memcpy in SD combo init

Best Regards,
Michał Mirosław


Michał Mirosław (2):
  mmc: split mmc_sd_init_card()
  mmc: implement SD-combo (IO+mem) support

 drivers/mmc/core/bus.c   |    9 ++
 drivers/mmc/core/core.c  |   12 ++-
 drivers/mmc/core/sd.c    |  249 +++++++++++++++++++++++++++-------------------
 drivers/mmc/core/sd.h    |   17 +++
 drivers/mmc/core/sdio.c  |  174 +++++++++++++++++++++++++-------
 include/linux/mmc/card.h |    1 +
 6 files changed, 320 insertions(+), 142 deletions(-)
 create mode 100644 drivers/mmc/core/sd.h


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-06-03  0:36 Mr. zong lee
  0 siblings, 0 replies; 85+ messages in thread
From: Mr. zong lee @ 2010-06-03  0:36 UTC (permalink / raw)


I am a branch manager in Bank of China Ltd, Hong Kong. I have a
business transaction with a value of US$25,000,000.00 only, is 60/40 ratio,
if you are interested send me Your Name, location, phone and occupation to
mrzonglee00@gmail.com and I will send you full details of this.

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-06-03  0:25 Mr. zong lee
  0 siblings, 0 replies; 85+ messages in thread
From: Mr. zong lee @ 2010-06-03  0:25 UTC (permalink / raw)


I am a branch manager in Bank of China Ltd, Hong Kong. I have a
business transaction with a value of US$25,000,000.00 only, is 60/40 ratio,
if you are interested send me Your Name, location, phone and occupation to
mrzonglee00@gmail.com and I will send you full details of this.

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-06-03  0:17 Mr. zong lee
  0 siblings, 0 replies; 85+ messages in thread
From: Mr. zong lee @ 2010-06-03  0:17 UTC (permalink / raw)


I am a branch manager in Bank of China Ltd, Hong Kong. I have a
business transaction with a value of US$25,000,000.00 only, is 60/40 ratio,
if you are interested send me Your Name, location, phone and occupation to
mrzonglee00@gmail.com and I will send you full details of this.

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-04-16 14:19 Ups Courier
  0 siblings, 0 replies; 85+ messages in thread
From: Ups Courier @ 2010-04-16 14:19 UTC (permalink / raw)





You have a bank draft of $580,000.00 USD , which await the outstanding
payment of $200.00 Contact our dispatch unit

for dispatch immediately. Contact person: Mr. Celin Smith, Email:
upscourier022@w.cn  Tell: +234 7026760896

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-03-27 13:31 EuroMIllions
  0 siblings, 0 replies; 85+ messages in thread
From: EuroMIllions @ 2010-03-27 13:31 UTC (permalink / raw)



Your email ID has won £2,500,000.00 GBP.
Fullname:
Address:
Age:
Tel:
Email: alexanderdarlin@gmail.com








^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-03-25  0:01 UBS International Holdings BV
  0 siblings, 0 replies; 85+ messages in thread
From: UBS International Holdings BV @ 2010-03-25  0:01 UTC (permalink / raw)



UBS International Holdings BV
Herengracht 600
NL-1017 CJ Amsterdam, Netherlands.
www.ubs.com/investmentbank

Greetings,

I am an investment consultant working with UBS International Holdings BV
in the Netherlands. I will be happy to work a transaction of $8.5million
out with you if you have a corporate or personal bank Account. If you are
interested, get back to me via my private email for further informations;
hhbeuker@live.nl

I look forward to hearing from you as soon as possible and thank you for
your time and attention.

Warmest Regards,
Mr. Beuker Hendrik
Investment Consultant.
UBS.





^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-03-22 23:33 UBS International Holdings BV
  0 siblings, 0 replies; 85+ messages in thread
From: UBS International Holdings BV @ 2010-03-22 23:33 UTC (permalink / raw)


UBS International Holdings BV
Herengracht 600
NL-1017 CJ Amsterdam, Netherlands.
www.ubs.com/investmentbank

Greetings,

I am an investment consultant working with UBS International Holdings BV
in the Netherlands. I will be happy to work a transaction of $8.5million
out with you if you have a corporate or personal bank Account. I look
forward to hearing from you as soon as possible via my email;
hhbeuker@live.nl

Thank you for your time and attention.

Warmest Regards,
Mr. Beuker Hendrik
Investment Consultant.
UBS.






^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2010-02-13 23:16 PATRICK CHAN
  0 siblings, 0 replies; 85+ messages in thread
From: PATRICK CHAN @ 2010-02-13 23:16 UTC (permalink / raw)




Good Day,
I am Mr. Patrick Chan; I work with Hang Seng Bank Ltd. I have a  
Private Business proposal of $24.5million USD. Kindly correspond to  
this email for more details of this proposal.

Regards,

Patrick Chan


^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2009-08-22  2:37 Kyungmin Park
  0 siblings, 0 replies; 85+ messages in thread
From: Kyungmin Park @ 2009-08-22  2:37 UTC (permalink / raw)
  To: linux-mmc

subscribe

^ permalink raw reply	[flat|nested] 85+ messages in thread
* (unknown), 
@ 2009-08-21 14:56 Normann Cunz
  0 siblings, 0 replies; 85+ messages in thread
From: Normann Cunz @ 2009-08-21 14:56 UTC (permalink / raw)
  To: Linux-Mailing-List (mmc)

Hello,

after having a first glance on the MMC/SD driver source, I'm unsure how to
handle the following requirement (System: Kernel 2.6.30 on i386).

I'm trying to integrate a SD card with a 'command system expansion' via
switch-command (see 'sd card association', 'physical layer simplified spec
2.00', chapter 4.3.12). The additional commands are used to communicate with
a specialized controller within the SD card (1), as well as access hidden
memory in a secure way (2). Because of the multi functionality (ordinary SD
+ 2 additional features) and not SDIO, I'd like to get a clue where to
start?
 
The first extension might be handled via ioctrl(), so that a user space
applications could use it. 
The second one should be accessible as a device, which can be mounted to
apply a file system.

So there are some questions:

- Do I have to write a complete new driver?
- Can I rely on the existing driver?
- Is there already something implemented?
- Where to place it?
- Do I need a new major device id (in case of a new driver) or just a minor
one for mounting?

Another problem might be, that a flash access (read/write) could intercept
the extended communication and vice versa?

In the hope to get a little bit of light in the dark,

TIA
Norman



^ permalink raw reply	[flat|nested] 85+ messages in thread
end of thread, other threads:[~2018-02-04  7:29 UTC | newest]

Thread overview: 85+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20161203.192346.1198940437155108508.davem@davemloft.net>
2017-01-03 14:35 ` [PATCH] uapi: use wildcards to list files Nicolas Dichtel
2017-01-03 15:56   ` David Miller
2017-01-03 21:37   ` Arnd Bergmann
2017-01-04  9:03     ` Nicolas Dichtel
2017-01-06  9:43       ` [PATCH v2 0/7] uapi: export all headers under uapi directories Nicolas Dichtel
2017-01-06  9:43         ` [PATCH v2 1/7] arm: put types.h in uapi Nicolas Dichtel
2017-01-09 11:33           ` Arnd Bergmann
2017-01-09 12:00             ` Russell King - ARM Linux
2017-01-06  9:43         ` [PATCH v2 2/7] h8300: put bitsperlong.h " Nicolas Dichtel
2017-01-06  9:43         ` [PATCH v2 3/7] nios2: put setup.h " Nicolas Dichtel
2017-01-09 11:33           ` Arnd Bergmann
2017-01-06  9:43         ` [PATCH v2 4/7] x86: put msr-index.h " Nicolas Dichtel
2017-01-06 12:14           ` Borislav Petkov
2017-01-06 20:50           ` Andy Shevchenko
2017-01-06  9:43         ` [PATCH v2 5/7] Makefile.headersinst: cleanup input files Nicolas Dichtel
2017-01-06  9:43         ` [PATCH v2 6/7] Makefile.headersinst: remove destination-y option Nicolas Dichtel
2017-01-06  9:43         ` [PATCH v2 7/7] uapi: export all headers under uapi directories Nicolas Dichtel
2017-01-09 10:01           ` Daniel Vetter
     [not found]           ` <1483695839-18660-8-git-send-email-nicolas.dichtel-pdR9zngts4EAvxtiuMwx3w@public.gmane.org>
2017-01-09 12:01             ` Russell King - ARM Linux
2017-01-09 12:56           ` Christoph Hellwig
2017-01-12 15:52             ` Nicolas Dichtel
2017-01-12 16:28               ` Jan Engelhardt
2017-01-12 16:32                 ` Nicolas Dichtel
2017-01-13  1:04                   ` Jeff Epler
2017-01-11 18:14           ` [Linux-c6x-dev] " Mark Salter
2017-01-09 11:33         ` [PATCH v2 0/7] " Arnd Bergmann
2017-01-11 12:42           ` Jesper Nilsson
2017-01-13 10:46           ` [PATCH v3 0/8] " Nicolas Dichtel
2017-01-13 10:46             ` [PATCH v3 1/8] arm: put types.h in uapi Nicolas Dichtel
2017-01-13 15:36               ` (unknown) David Howells
2017-01-13 16:01                 ` [PATCH v3 1/8] arm: put types.h in uapi Nicolas Dichtel
2017-01-13 16:19                   ` Russell King - ARM Linux
2017-01-13 17:06               ` Russell King - ARM Linux
2017-01-13 10:46             ` [PATCH v3 2/8] h8300: put bitsperlong.h " Nicolas Dichtel
2017-01-13 10:46             ` [PATCH v3 3/8] nios2: put setup.h " Nicolas Dichtel
2017-01-13 10:55               ` Tobias Klauser
2017-01-13 10:46             ` [PATCH v3 4/8] x86: stop exporting msr-index.h to userland Nicolas Dichtel
2017-01-13 15:43               ` (no subject) David Howells
2017-01-13 16:08                 ` [PATCH v3 4/8] x86: stop exporting msr-index.h to userland Nicolas Dichtel
2017-01-13 16:38                   ` Borislav Petkov
2017-01-13 10:46             ` [PATCH v3 5/8] Makefile.headersinst: cleanup input files Nicolas Dichtel
2017-01-13 10:46             ` [PATCH v3 6/8] Makefile.headersinst: remove destination-y option Nicolas Dichtel
2017-01-13 10:46             ` [PATCH v3 7/8] uapi: export all headers under uapi directories Nicolas Dichtel
2017-01-13 10:46             ` [PATCH v3 8/8] uapi: export all arch specifics directories Nicolas Dichtel
2018-01-29 17:17 (unknown), Jones
  -- strict thread matches above, loose matches on Subject: below --
2017-07-09 23:19 (unknown), Corporate Lenders
2017-04-17  0:43 (unknown), John Ewalt
2017-03-21  6:58 (unknown) Piotr Sroka
2017-01-21 17:47 (unknown), amit mahadik
2015-04-29 20:47 (unknown) Angelo Dureghello
2014-05-23  2:50 (unknown), Wang, Yalin
2013-10-17  2:48 (unknown), remittance2013@hotmail.comContact
2013-09-19  1:04 (unknown), Loan Offer
2012-09-28 10:28 (unknown), yongd
2012-09-18  4:52 (unknown), Mr. Beuker Hendrik
2012-09-07  0:12 (unknown), Allen and Violet Large
2012-09-06 12:23 (unknown), MR.TAN WONG
2012-08-09  6:55 (unknown), Lee Susman
2012-03-31 14:44 (unknown), jin mong
2011-12-05  9:14 (unknown), r66093
2011-10-31 14:47 (unknown), ygardi
2011-10-31  8:49 (unknown), merez
2011-10-31  7:43 (unknown) Bar Yasser
2011-09-22 11:10 (unknown), Girish K S
2011-09-22 11:10 ` (unknown), Girish K S
2011-06-17  3:35 (unknown), Mr. Vincent Cheng
2011-06-15  4:27 (unknown), Microsoft Promotion Award Team
2011-05-16 23:30 (unknown), Greg Moore
2010-11-16 13:59 (unknown), , Ming-Yang Lee
2010-08-21 16:19 (unknown) Award Promo
2010-07-28  6:02 (unknown), Roy Zang
2010-07-17  8:06 (unknown), Grant Mayor
2010-06-05 17:29 (unknown) Michał Mirosław 
2010-06-05 17:29 ` (unknown) Michał Mirosław 
2010-06-05 17:29 ` (unknown) Michał Mirosław 
2010-06-03  0:36 (unknown), Mr. zong lee
2010-06-03  0:25 (unknown), Mr. zong lee
2010-06-03  0:17 (unknown), Mr. zong lee
2010-04-16 14:19 (unknown), Ups Courier
2010-03-27 13:31 (unknown), EuroMIllions
2010-03-25  0:01 (unknown), UBS International Holdings BV
2010-03-22 23:33 (unknown), UBS International Holdings BV
2010-02-13 23:16 (unknown), PATRICK CHAN
2009-08-22  2:37 (unknown), Kyungmin Park
2009-08-21 14:56 (unknown), Normann Cunz

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox