From: Adrian Hunter <adrian.hunter@intel.com>
To: Faiz Abbas <faiz_abbas@ti.com>,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org
Cc: ulf.hansson@linaro.org
Subject: Re: [PATCH] mmc: sdhci_am654: Add workaround for card detect debounce timer
Date: Wed, 5 Aug 2020 11:14:32 +0300 [thread overview]
Message-ID: <2d692a90-0e58-ae69-9b5b-c9eb3ffe21ec@intel.com> (raw)
In-Reply-To: <20200729234130.25056-1-faiz_abbas@ti.com>
On 30/07/20 2:41 am, Faiz Abbas wrote:
> There is a one time delay because of a card detect debounce timer in the
> controller IP. This timer runs as soon as power is applied to the module
> regardless of whether a card is present or not and any writes to
> SDHCI_POWER_ON will return 0 before it expires. This timeout has been
> measured to be about 1 second in am654x and j721e.
>
> Write-and-read-back in a loop on SDHCI_POWER_ON for a maximum of
> 1.5 seconds to make sure that the controller actually powers on.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
> drivers/mmc/host/sdhci_am654.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
> index 1718b9e8af63..55cff9de2f3e 100644
> --- a/drivers/mmc/host/sdhci_am654.c
> +++ b/drivers/mmc/host/sdhci_am654.c
> @@ -272,6 +272,7 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
> sdhci_set_clock(host, clock);
> }
>
> +#define MAX_POWER_ON_TIMEOUT 1500 /* ms */
> static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
> {
> unsigned char timing = host->mmc->ios.timing;
> @@ -291,6 +292,26 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
> }
>
> writeb(val, host->ioaddr + reg);
> + if (reg == SDHCI_POWER_CONTROL && (val & SDHCI_POWER_ON)) {
> + /*
> + * Power on will not happen until the card detect debounce
> + * timer expires. Wait at least 1.5 seconds for the power on
> + * bit to be set
> + */
Can you use readb_poll_timeout() here?
> + ktime_t timeout = ktime_add_ms(ktime_get(),
> + MAX_POWER_ON_TIMEOUT);
> + do {
> + if (ktime_compare(ktime_get(), timeout) > 0) {
> + dev_warn(mmc_dev(host->mmc),
> + "Power on failed\n");
> +
> + return;
> + }
> +
> + writeb(val, host->ioaddr + reg);
> + usleep_range(1000, 10000);
> + } while (!(readb(host->ioaddr + reg) & SDHCI_POWER_ON));
> + }
> }
>
> static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
next prev parent reply other threads:[~2020-08-05 8:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-29 23:41 [PATCH] mmc: sdhci_am654: Add workaround for card detect debounce timer Faiz Abbas
2020-08-05 8:14 ` Adrian Hunter [this message]
2020-08-05 8:22 ` Faiz Abbas
2020-08-05 9:46 ` Adrian Hunter
2020-08-05 13:16 ` Faiz Abbas
2020-08-05 13:16 ` Faiz Abbas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2d692a90-0e58-ae69-9b5b-c9eb3ffe21ec@intel.com \
--to=adrian.hunter@intel.com \
--cc=faiz_abbas@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox