From: seedshope <bocui107@gmail.com>
To: linux-mmc@vger.kernel.org
Subject: about MicroSD transport issue for the current mainline kernel
Date: Wed, 17 Aug 2011 22:11:41 +0800 [thread overview]
Message-ID: <4E4BCC1D.7080400@gmail.com> (raw)
In-Reply-To: <4E4BC770.90708@gmail.com>
On 08/17/2011 09:51 PM, seedshope wrote:
> Hi All,
>
> I uses potevio MicroSD 512M to test the SD/MMC driver in current master
> kernel. I found some issue:
>
> 1. The issue
> (1) After I insert the microSD,Why The SD card probe finish(The
> parrition and device has already register). But The more and more data
> transport between card and host? Who can told me the function of this
> data.(The log information as following).
>
> (2) The MicroSD can be probe successful. But The error information
> display on the processor of multi-block data transfer.
>
> Any advices are welcome!
>
>
> 2. Kernel configure:
> CONFIG_MMC = y
> CONFIG_MMC_DEBUG = y
> CONFIG_MMC_BLOCK = y
> CONFIG_MMC_SDHCI = y
> CONFIG_MMC_SDHCI_PCI = y
>
> 3. Debug information:
> mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0 timing 0
> mmc0: req failed (CMD5): -110, retrying...
> mmc0: req failed (CMD5): -110, retrying...
> mmc0: req failed (CMD5): -110, retrying...
> mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 timing 0
> mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 timing 2
> mmc0: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0 timing 2
> mmc0: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 2 timing 2
> mmc0: new high speed SD card at address 0002
> mmcblk0: mmc0:0002 N/A 484 MiB
> mmcblk0: p1
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 57, nr 71, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 57
> mmcblk0: error -84 transferring data, sector 61, nr 67, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 61
> quiet_error: 15 callbacks suppressed
> Buffer I/O error on device mmcblk0, logical block 7
> mmcblk0: error -84 transferring data, sector 65, nr 63, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 65
> mmcblk0: error -84 transferring data, sector 69, nr 59, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 69
> mmcblk0: error -84 transferring data, sector 71, nr 57, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 71
> Buffer I/O error on device mmcblk0, logical block 8
> mmcblk0: error -84 transferring data, sector 73, nr 55, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 73
> mmcblk0: error -84 transferring data, sector 77, nr 51, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 77
> Buffer I/O error on device mmcblk0, logical block 9
> mmcblk0: error -84 transferring data, sector 87, nr 41, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 87
> Buffer I/O error on device mmcblk0, logical block 10
> mmcblk0: error -84 transferring data, sector 127, nr 1, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 127
> Buffer I/O error on device mmcblk0, logical block 15
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 143, nr 113, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 143
> Buffer I/O error on device mmcblk0, logical block 17
> mmcblk0: error -84 transferring data, sector 151, nr 105, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 151
> Buffer I/O error on device mmcblk0, logical block 18
> mmcblk0: error -84 transferring data, sector 161, nr 95, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 161
> mmcblk0: error -84 transferring data, sector 215, nr 41, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 215
> Buffer I/O error on device mmcblk0, logical block 26
> mmcblk0: error -84 transferring data, sector 217, nr 39, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 217
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 57, nr 7, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 57
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 535, nr 9, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 535
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 535, nr 1, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 535
> mmcblk0: retrying using single block read
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 193, nr 116, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 193
> mmcblk0: error -84 transferring data, sector 215, nr 94, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 215
> mmcblk0: error -84 transferring data, sector 217, nr 92, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 217
> mmcblk0: error -84 transferring data, sector 279, nr 30, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 279
> mmcblk0: error -84 transferring data, sector 289, nr 20, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 289
> mmcblk0: retrying using single block read
> mmcblk0: error -84 transferring data, sector 57, nr 124, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 57
> mmcblk0: error -84 transferring data, sector 61, nr 120, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 61
> mmcblk0: error -84 transferring data, sector 65, nr 116, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 65
> mmcblk0: error -84 transferring data, sector 71, nr 110, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 71
> mmcblk0: error -84 transferring data, sector 75, nr 106, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 75
> mmcblk0: error -84 transferring data, sector 77, nr 104, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 77
> mmcblk0: error -84 transferring data, sector 79, nr 102, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 79
> mmcblk0: error -84 transferring data, sector 81, nr 100, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 81
> mmcblk0: error -84 transferring data, sector 85, nr 96, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 85
> mmcblk0: error -84 transferring data, sector 87, nr 94, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 87
> mmcblk0: error -84 transferring data, sector 103, nr 78, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 103
> mmcblk0: error -84 transferring data, sector 127, nr 54, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 127
> mmcblk0: error -84 transferring data, sector 143, nr 38, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 143
> mmcblk0: error -84 transferring data, sector 151, nr 30, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 151
> mmcblk0: error -84 transferring data, sector 161, nr 20, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 161
> mmcblk0: error -84 transferring data, sector 177, nr 4, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 177
> mmcblk0: error -84 transferring data, sector 57, nr 1, card status 0x900
> end_request: I/O error, dev mmcblk0, sector 57
>
>
> Thanks
> hongbo
prev parent reply other threads:[~2011-08-17 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CANYdXnoZK3OoWOnJhyq645GofnsXuk7tJm09Wv8=Y+gLujPSkQ@mail.gmail.com>
2011-08-16 9:26 ` Testing Infrastructure for SD/MMC Commands Shashidhar Hiremath
2011-08-16 16:03 ` J Freyensee
2011-08-16 16:11 ` Chris Ball
2011-08-17 13:51 ` seedshope
2011-08-17 14:11 ` seedshope [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E4BCC1D.7080400@gmail.com \
--to=bocui107@gmail.com \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox